
Here's a cost-effective tester that lets you determine the electromagnetic field around power lines, appliances, computer and communication equipment and industrial devices. The hand-held instrument measures EMF radiation from 30 to 300 Hz. Single axis. The range is 0.1-199.9 mG and 0.01-19.99 uT, with an accuracy of +/- 4%. The 5" x 2-3/4" x 1" plastic case has a 1-3/4" x 3/4" LCD display and a switch to toggle between micro Tesla and milli Gauss. It's quick, easy and reliable, and when you see the EMF around your old monitor, it will give you one more reason to buy the new one you want!
![]() |
92254 EMF TESTER |
And save a bundle. The "Kill-A-Watt" plugs into a wall outlet and accepts the power line for any devices or appliances that draw up to 1875 watts. Identifies energy eaters, tracks efficiency and costs over time, and checks on your electricity provider by monitoring voltage, current (amps), watts, kilowatt hours, frequency (Hz), volt amps, power factor, and elapsed time. Measures 5-1/8" x 2-3/8" x 1-7/16" with a 1-3/4" x 11/16" LCD screen. You may never use a waffle iron again.
![]() |
93575 KILL-A-WATT |
If Madame Curie had owned this, she'd be alive today. (She'd be more than 140 years old, of course, but still….) Our Radex RD1503 digital radiation meter measures in uSieverts/hour and uRoentgens/hour in (3) different ranges each. Indicates the number of cycles of observation and has an audible mode as well as a 1-3/4" x 1-1/8" LCD. The unit measures 4" x 2-1/4" x 1" and comes with a detailed manual and technical certificate. Made in Russia.
![]() |
93647 RADIATION METER |
Evaluate the RF emissions of mobile phone, radio and TV transmission towers, wireless camera, Wi-Fi and LAN detection and installation, microwave oven leakage, and other environmental safety concerns.This handheld instrument from Sper Scientific® measures radio frequency (electromagnetic frequencies above audio range and below infrared light) including oven microwaves at 2.45GHz and other RFs between 50MHz and 3.5GHz. Readout is in a 1-5/8" x 1-1/4" LCD and the measurement is between .003 - 3.999mW with .001mW resolution. Comes with a 9V battery and carrying pouch and is 5-1/4" x 2-1/4" x 1-1/4" overall. Don't stand in the kitchen without it.
![]() |
94163 MICROWAVE METER |
3-1/2 digit LCD electrical multimeter with a max reading of 1999. Measures (5) ranges of DC, (2) ranges of AC voltage both to 500 V, (5) ranges of resistance to 200K ohms, DC current to 10 Amp., diode test, transistor and battery test. A pocket sized 2-7/8" x 5-3/4" x 1-1/2", it comes complete with test leads and 9 volt battery. The best value for this size we have seen.
![]() |
89416 DIGITAL MULTIMETER |
Our pocket-sized multimeter measures a tiny 3-5/8" x 1-3/4" x 1" thick, with a 3-1/2 digit display on a 1-1/4" x 9/16" LCD screen. Will measure up to 500VAC, 100VDC, current from 200uA up to 10A, resistance up to 2000K ohms, and will also test diodes and transistors. Comes with (2) 24" test leads and a battery to power it. Teeny price to match its size. Great for science fair projects.
![]() |
93148 MULTIMETER |
'Tain't a toy, McGee. And 'tain't surplus. This digital dB meter from Sper Scientific is pocket-sized--8" x 1-5/8" x 7/8"--and measures sound levels from 32 to130 dB with a built-in 1/2" microphone using (2) "AAA" batteries (included). The resolution is 0.1 dB and it's accurate to within 1.5 dB. Has a built-in calibration oscillator and comes with a foam windscreen and small screwdriver for calibrating. It's very easy to use, with one-button operation on what the manufacturer calls the smallest, lightest dB meter on the market--to help you stay a step ahead of OSHA.
![]() |
92622 SOUND LEVEL PEN |
A nice price for a 0-10 volt DC voltmeter. The black-plastic housing is 4" x 5-1/2" x 3-3/4" high overall, with a slanted gauge face about 3-1/2" x 4". Red and black thumbscrew terminals for positive and negative inputs. Great for small school projects or testing batteries around the house.
![]() |
91698 VOLTMETER |
Our all-new stainless steel Marshalltown pressure gauges have silicone-filled dials for accuracy and long life. The liquid silicone mutes shock and vibrations to ensure accuracy, and protects the components from corrosion. Legible black-on-white faces.
| FACE SIZE | PSI READING | ||||
|---|---|---|---|---|---|
![]() |
33095 PRESSURE GAUGE | 2-1/2 | 0-400 | Details | |
![]() |
33111 PRESSURE GAUGE | 3-1/2 | 0-600 | Details |
This 1-5/8" dia x 1" thick gauge registers up to 160psi in 2psi increments and up to 110kPa in 20kPa increments. Black steel case, connection is via a 1/8 NPT fitting on the back.
![]() |
40287 160 PSI GAUGE |
This pressure gauge is filled with glycerine to help foil those ugly vibes and keep condensation at bay. It measures 0-200psi in 7psi increments from 0-20 then in 5psi increments from 20-200psi all on a black/green dial. Has a 1/8" NPT fitting on the back and measures 1-5/8" dia x 1" thick with the fitting extending another 3/4" out the back.
![]() |
37169 PRESSURE GAUGE |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »