Express Shop!
Search Our Stuff
View Cart (0)
Sign In/Up! (It's Worth It!)
Need Some Loud?
We've got some! For replacements or build-your-own speaker systems, you choose: a 40W, 8 Ohm, 10" dia x 4-1/4" deep speaker with (wethinks) a polypropylene cone, a 3-1/2" voice coil, and quick-disconnect terminals; or a 35W, 8 Ohm, 8" dia x 3-1/4" deep speaker with an aluminum cone, 2-1/2" voice coil, and quick-disconnect terminals. Either one is way loud
 |
37833 10" SPEAKER | |
|
37834 8" SPEAKER |
Popular Tags:
speakers
SuellenHome
GK
|
Add Tag 
Make A Big Noise
And maybe open a juke joint with this megalicious, 10" dia, 100 watt/4 ohm speaker that's brand new, never having been installed in the juke box it was made for. Has a 3-1/2" voice coil with paper accordion. Frequency response 37Hz to 5674Hz, sensitivity 93.5 decibels. Weighs in at approx 7-3/4 lbs.
|
38631 BIG SPEAKER |
Piezo Speaker
Use it as a speaker, a contact microphone, or add an external signal and turn it into a buzzer. It's a 5/8" dia piezodisk in a 1-1/8" x 3/4" x 1/4" thick assembly, with a 1/8" hole for mounting. Spade connectors at the end of 32" long leads, followed by an RF filter. The leads are hardwired straight to the disk. Digisound S-HRH-V.
|
27857 PIEZO SPEAKER |
A Foot Of Speaker
It's a 12" dia x 5" deep speaker with a 16-oz magnet for some larger sounds. Our 50W/4-ohm speaker has a 1-1/2" voice coil, 30-4kHz frequency response. It's gasketed with (6) 3/16" mounting holes and quick-disconnect terminals.
|
38718 12 INCH SPEAKER |
Piezo Tweeter
Sure-handed utility infielder for the Expos, late 80s. Also a horn-mounted speaker, 80W/2.5-35kHz frequency response, 97 decibel crossover at 5kHz/4uF. This tweeter is mounted in a black plastic horn measuring 10-1/2" wide x 4" high x 4-1/2" deep. Should work with a 4- or 8-ohm load, but you may want to put a low-value 1/2W resister in series to pad it down a bit. Has (8) 3/16" mounting holes and quick-disconnect terminals.
|
38712 MOUNTED TWEETER HORN |
It Busted Out Of Its Cell
It's your basic, entry-level plastic speaker, possibly from a cell phone. It's 8 ohms, probably able to handle 1/2 watt. The 1-1/2" dia cone is on a 2" square bracket with an adhesive label on the front and a retaining clip on the back, and has a couple of 2" leads that terminate in a 3.5 mm 2-pin plug.
|
33889 1 1/2" SPEAKER |
Piezo Disc
Brand new 13/16" piezo disc mounted in an arch-shaped 1" x 7/8" x 1/4" black-plastic housing was originally intended to be a cell phone speaker. (2) leads (soldered tabs) extend from the bottom of the case. Made by Murata.
|
34081 PIEZO DISC |
Four-Square Speaker
It's a 12W/8-ohm, 80-10kHz frequency response speaker with 3/4" voice coils and a 5-oz magnet. The paper cone with cloth accordion is just under 2" deep on a 4" square mounting plate, with 3/16" mounting holes at the corners and quick-disconnect terminals.
|
38713 4 INCH SPEAKER |
Speak Up
Gold-plated contacts - what everybody needs to do business today. But in this case, they're part of our 1" dia, 150 ohms mini-speaker. Drawing less than 1/4 watt, this is the type of speaker used in cellular phones, and has good sound quality if held close to your ear. The peel-away adhesive mount makes it a great component for a small project. They come (2) to a package, so think small stereo.
|
28785 MINI SPEAKER |
Plain Speaking
From plain speakers. Try this pair of generic 25W 8 OHM speakers with 5" cones, 2-1/2" voice coils, and quick-disconnect terminals on the back. They're 2-1/2" thick with 1/4" mounting holes at the corners.
|
37565 5 INCH SPEAKER |
6-1/2" Speaker
Our 6-1/2" 40W/4-ohm speaker has 30-4kHz frequency response, a 2-1/4" voice coil, butyl/poly cone. It is 3" deep. It has (4) 3/16" mounting holes and quick-disconnect terminals.
|
38714 6-1/2" SPEAKER |
Shop by Popular Tags
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »
