Express Shop!
Search Our Stuff
View Cart (0)
Sign In/Up! (It's Worth It!)
Phor Phone Phixers
Trace wire paths and test phone and data lines with this professional tone and probe kit from Tempo®. Non-contact design saves stripping or disconnecting any wires The unit, a 77HP Tracer 2 polarity checker/test tone generator, measures 2-1/4" x 2-1/8" x 1-1/4", plus an 8" lanyard. Check continuity and polarity through its 22" red and black leads with alligator clips or its RJ-11 jack (standard U.S. 4-lead phone). Generate a 2-tone OSC signal at two different speeds. Comes with a 10" long 200EP inductive amplifier with a probe and 2" dia speaker. It's push-button activated, with terminals on top for a handset. Carry both on your belt in the blue-canvas case provided. You supply a pair of 9V batteries.
 |
37227 TONE & PROBE KIT |
Popular Tags:
TrelzokianTester
|
Add Tag 
Phone Freedom
Frustrated by a too-short phone cord? Plug your telephone line cord (a single-line RJ11, 2-line RJ14, or 3-line RJ25) into one end of this 1-1/4" x 1/2" x 9/16" in-line coupler from Radio Shack(r). Plug a telephone extension cord into the other end of the modular plastic coupler. Plug the free end of the extension into a wall jack. See how simple? See how convenient? See how you can finally have a real-life dependable phone, as opposed to a cordless handset, where you need it?
|
32903 IN-LINE COUPLER |
What A Buy!
Our 4-1/2" long x 2" wide x 1" deep cell phones fit nicely in this black-leather carrying case. The front is a 2-1/2" x 1-5/8" window of clear plastic through which you can press the buttons. The case is open on the bottom so you can access the ports, and comes with a 6" wrist strap and a plastic belt/pocket clip. A small strap snaps over the phone antenna to keep it from slipping out. Unfortunately, if your phone doesn't have an external antenna, there is nothing to keep it in except a snug fit, an extraordinarily rigid posture, and a determination to never bend over.
|
35026 CELL PHONE CASE |
Direct To Modular
Don't toss out that obsolete direct-wire phone. It was made back in the old days, when telephones were made to last a lifetime instead of a year and a half. Use it, instead, with your modular wall jack and this 25 ft cream-colored base cord. It has a standard modular connector on one end and spade connectors on the other, and supports (1) or (2) lines. You get a working phone, and a warm feeling for saving the life of that reliable collectible.
|
31280 MOD/DIRECT CORD |
Plug It In
So the puppy chewed through the phone cord? Our modular cords with connectors on each end let you replace the old one in a snap. They support (1) or (2) lines. The off-white modular base cords connect voice or data devices to a wall jack. At this price, we'd buy extra. Fido, after all, is still teething.
|
31283 BASE CORD, 14 FT | |
|
31282 BASE CORD, 25 FT |
Phone Splitter
Our name for this "beige box" which lets you hook up as many as (4) phones to (1) line when the phones have 4-line cords and the line terminates in a standard modular receptacle. Just plug the box into the modular receptacle, pry off the lid and wire in (1) to (4) phones (or lines) and fasten the box to the wall. The box is 4-1/4" x 2" x 1-1/8" thick and phone beige. Sounds like a way to get the phone, the fax, the computer and an extension all on to a single line??
|
30055 PHONE SPLITTER |
Phone Wire: Non-Mod
Wiring for square phones: this 25 foot telephone wire is 4-wire with spade connectors at the end - for a non-modular, hardwire phone. Ivory. A square item at a hip price!
|
29375 NON-MOD PHONE CORD |
Phone Line Filter
This 7-foot length of standard 4-wire gray telephone cord has a modular plug on each end and an in-line 1-1/2" x 1" dia RF filter at one end. 'Nuff said.
|
34424 RF FILTER |
Phone Index
A pretty cheap little phone number holder that will work fine at a beginner level. 3" sq x 3/8" thick, it is a white plastic case that opens to one of 12 pages for phone numbers or notes. Slide the index pointer on the edge to select the three letter group of your choice. Lift the lid and the selected page will be displayed. We like it for a stocking stuffer.
|
29957 PHONE NUMBER INDEX |
Basic Phoning
Just a basic common phone line. 25 feet long, flat, 4-wire, ivory casing. Nothing at the ends: you attach the modular plugs, spade plugs, or incorporate it into your imaginative electrical contraptions. We'll keep the price basic, too.
|
29374 PLAIN PHONE CORD |
Buzz Buster
This snap-on RFI or EMI ferrite (but not magnetic) suppressor, with a 7mm ID, will fit an 8-conductor phone line perfectly-and will work on a thinner line if you're not going to be kicking it around under your desk. The case measures 3/4" square x 1-1/4" long when closed.
|
36476 RFI SUPPRESSOR |
Popular Tags:
headphones
for
cordless
|
Add Tag
Shop by Popular Tags
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »
