Express Shop!
Search Our Stuff
View Cart (0)
Sign In/Up! (It's Worth It!)
Image Viewing Preferences
You now have the option to view our web site with dazzling color photos or with our traditional hand-drawn line art. It’s a big decision, but don’t worry; you can always change your mind later. Choose your path below. Thanks! If you have a sciplus.com web account we can remember your changes. Sign in to your account or create an account.
Lazy Scott Bearings
Never seemed fair to nail the "lazy" tag so permanently on the "Susans" but that probably has no "bearing" on the issue. Also called turntable bearings, they are the square, flat ball bearing devices YOU bolt between two flat objects to achieve rotation. Like that spinning center section of a Chinese restaurant table. We had these in surplus once and they were quite popular. To our chagrin, we discovered they could be bought commercially for the same price. So we did. The 4" version is rated for a 300lb. load, the 6" for 500lbs., and the 12" (round) for 1000lbs.
 |
21992 LAZY SCOTT BEARING, 12" | |
|
2934 LAZY SCOTT BEARING, 4" | |
|
21995 LAZY SCOTT BEARING, 6" |
Get Your Bearings
Bring these bearings to bear on your next project. Our supply and variety is constantly rolling over so get ‘em while we got ‘em!.
| O.D. | I.D. | ||||
|---|---|---|---|---|---|
|
33505 BEARING, 19MM | 19mm | 7mm | Details | |
|
40281 BEARING, 2-7/16" | 2-7/16" | 1-3/16" | Details | |
|
39108 BEARING, 20MM | 20mm | 6.5mm | Details | |
|
39900 BEARING, 23MM | 23mm | 13mm | Details | |
|
39110 BEARING, 24MM | 24mm | 8mm | Details | |
|
39905 BEARING, 35MM | 35mm | 15mm | Details | |
|
39901 BEARING, 40MM | 40mm | 23mm | Details |
Aluminum Pillows
For metalheads? Sorry. These are oil-impregnated, cast-aluminum, pillow block bearings for holding a shaft, journal or spindle. The large set is 4" long x 2" x 1-1/8" deep with a 7/8" ID and 3/8” mounting holes. Made in the USA.
|
39932 LARGE PILLOW BLOCK |
One-Sided Bearing
An oddity, but mighty sturdy. This single direction thrust ball bearing measures 47mm (1.85") OD x 22mm (.87") ID x 16mm (.63") thick. Only spins on one face, the opposite face is banded, but is oil-impregnated. The ID port is beveled, and the bearing can be lubricated.
|
39956 SINGLE SIDED BEARING |
Bear These In Mind
Nice sealed bearing from Onan®, 52mm OD x 25mm ID x 15mm thick with a 7mm x 5mm chamfer along one outside edge. You get a pair.
|
40889 SEALED BEARING |
Turning The Tables
From the (nearly) bygone world of spinning platters, comes this open-bearing turntable assembly. Black plastic, 14" dia with a 1/4" center bore, cross-braces, little rubber feet, and an 8-bearing ring sitting inside. Call it a DIY kit for a lazy Susan…or Margaret, or Cynthia, or Hermione.
|
39125 TURNTABLE BEARING |
Skateboard Bushed?
That's what these nylon bushings were made for, but they're suitable for anything that could use a little bushing. Small one is 15/16" dia x 7/16" thick with a 3/8" bore and a slight taper and very light striations on the wider face. The middle-sized measures 15/16" dia x 15/32" thick with a 3/8" bore and a slight taper. The largest is 1" dia x 17/32" thick with a 3/8" bore.
|
36271 LARGE BUSHING | |
|
36269 MEDIUM BUSHING | |
|
36270 SMALL BUSHING |
Beware of Greeks Bearing Cups
Unless they're these steel bearing cups. These measure 3/4" x 2-1/8" OD, with a 1/8-inch thick wall, and a 15/16" bore, and we think they'll bear up nicely, thank you. Also called bearing cages, but we couldn't think of a pun for cages. Good metal sculpture and robotic fodder, too.
|
39918 BEARING CUP |
Shop by Popular Tags
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »
