
Clear soft plastic suction cups in varying sizes. Medium small is 1–1/16" dia. without a hook. Medium large is 1–5/8" dia with a hook. Finally, the medium yellow is solid yellow or sometimes green, is 1–1/2" dia and has no hook. Yellow/Green is made of a harder rubber than the other clear guys. If you can’t find what you need here, it doesn’t exist.
![]() |
6541 MEDIUM LARGE, 1-5/8" W/HOOK | |
![]() |
30266 MEDIUM SMALL, 1-1/16" | |
![]() |
21492 MEDIUM, GRN/YEL, 1-1/2" |
Huge black soft rubbery suction cup, 4-3/4" dia with a handle molded onto the back. Made in Taiwan, the French and English labeling suggests it was destined for use as a dent puller or glass carrier. Which is fine if you have dents to pull and glass to carry. If not, use it as a non-invasive and or temporary hanging device in locales where such features are desirable, such as hotel rooms, boat hulls, windows, and the sides of fine antiques (Grandmothers excepted). It is really powerful!!
![]() |
88956 GIANT SUCTION CUP |
Or out of brackets? If you're out, order this 10-pack of steel right-angle brackets, 1-1/2" on a side x 5/8" wide with (4) countersunk 1/4" mounting holes.
![]() |
38320 BRACKETS |
Only a fool would pass up this 20-foot length of #4 (1/8" thick x 9/16" long) straight-link chain. Zinc-plated steel, very nice for light duty, as in chain-link leads for dogs or really big cats.
![]() |
38000 #4 CHAIN |
Maybe your landlord won't let you install permanent hooks. Maybe you can't decide where you want them. Maybe you just flunked Mollies 101. Doesn't matter. We have the removeable (and moveable) Amazing InstaHooks™. The box says the (8) 2-1/4" dia and the (8) 2-7/8" dia white-plastic hooks are all-purpose and heavy-duty. We wouldn't hang a masterpiece on one in the living room, but they're great for oven mitts in the kitchen, belts in the closet, brooms in the garage and more. Backed by white-rubber vacuum pads (read: suction cups) they are surprisingly strong when hung on surfaces like glass and porcelain. (They won't work on porous surfaces.) It's a solution we're hooked on.
![]() |
34806 INSTAHOOKS |
This black steel extender hook-think very long, fashion-model-skinny S-hook-looks as if it's made for planters or pots and pans, but, as you know, a hook just doesn't care what you hang on it. Try it for anything you need to hang a little lower. It's 8" long x 1/4" dia, with 1-1/4" opening on the hooks.
![]() |
37894 EXTENDER HOOKS |
Our each is a pair of Monster-brand nearly-universal-joint mounts for speakers, but adaptable for lots of other uses. Steel and forged aluminum, with your choice of a black- or white-enamel finish, they swivel 360°, tilt up to 210° and come with mounting hardware, bolts, mollies, and straps. They’re approx 3-3/8” long on a 2” x 3” plate and hold up to 8 lbs each, and the speaker/whatever-holding end is tapped to take a 7/16”-14 bolt. Made for use with Bose® Acoustimass, Lifestyle, or Outdoor speakers
![]() |
37791 BLACK UNIMOUNT | |
![]() |
37790 WHITE UNIMOUNT |
Brass L-shaped shoulder hooks (Why aren't they elbow hooks?) are handy to have around. Each has a thread about half as long as the hook itself, and a small plate that fits against the wall. You get (2) packages, for a total of (12) 1/2" hooks, (6) 1" hooks, or (4) 1-1/2" hooks.
![]() |
33789 1" SHOULDER HOOKS | |
![]() |
33788 1-1/2" SHOULDER HOOKS | |
![]() |
33787 1/2" SHOULDER HOOKS |
Or pretty and slick. We're supine with admiration for the way these white-plastic shelf brackets work and look- sleek, unobtrusive and surprisingly strong. Call it the triumph of physics over storage. Each set designed for a corner shelf has (2) bottom-only brackets that support the front edge, plus a 2-part middle bracket, the bottom of which is 1-7/8" tall x 1-1/2" wide x 1-3/4" deep, and the top of which is 7/8" tall x 1-3/4" wide. It's rated for 44 lbs. Each set designed to hold a straight shelf has (2) 2-part brackets, with bottoms that measure 2-1/2" tall x 1-1/2" wide x 1" deep, and tops that are 3/4" high x 1-1/2" wide x 1" deep. Rated for 33 lbs. Both sets come with the necessary screws and mollies, and both adjust to hold shelf stock up to 1" thick.
![]() |
36547 CORNER SHELF BRACKET | |
![]() |
36578 SHELF BRACKET |
Good! Try using this uber-sturdy, 2"-wide black nylon hook-and-loop strap thingy to get them hung-up on something else, like the garage wall. The strap is 36" long (18" of hook; 18" of loop) and runs through a swiveling eyelet attached to a 3-1/2" x 3/8" thick steel carabiner. The carabiner clips onto a big (3-1/4" long x 5/16" thick x 3/4" ID) steel-threaded eyehook. Each strap is good for up to a 300-lb load, which is a pretty big hang-up. Think bikes, ladders and on up.
![]() |
93118 HANG STRAP |
And we'll follow you anywhere. Here's stainless steel turnbuckles with hooks on the business ends. They are 6-5/8" closed, 9-1/4" open, with 1/4" dia bolts and 7/16" ID hooks on the ends with a 220lb max load capacity.
![]() |
36775 MD. TURNBUCKLE, HOOKS |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »