Express Shop!
Search Our Stuff
View Cart (0)
Sign In/Up! (It's Worth It!)
Image Viewing Preferences
You now have the option to view our web site with dazzling color photos or with our traditional hand-drawn line art. It’s a big decision, but don’t worry; you can always change your mind later. Choose your path below. Thanks! If you have a sciplus.com web account we can remember your changes. Sign in to your account or create an account.
Tough Gear Motor
Small but durable. Measures 2-7/16" long x 1-5/16" dia. and has a 3/16" x 3/8" long flattened offset shaft. Runs between 6-12 VDC. At 12 VDC, it spins 7 rpm and draws 90mA with a 500mA stall current. Gearbox ratio is approx 400:1. Has (3) 3/32" mounting holes on the shaft face. Reversible.
 |
37739 12VDC GEAR MOTOR |
Oscillator Alert!
For all of life's back and forths or up and downs, like those creepy bat wings in our favorite Halloween displays. This new gear motor was made for the Saturn people, to run a rear wiper assembly, but now it can oscillate in your window display, kinetic sculpture, robot or clever invention. Operates on 12VDC at 1.5A (no load). Stall current is 7A. Has a 3-pin power connector (blue=pos, brown=ground, and ignore the black). The output shaft is 1-3/4" long OA x 6mm dia, and partially threaded. Oscillates approx 2 times per second. The whole magilla measures 6-1/2" x 6-3/4" x 5-1/8".
|
39223 WIPER MOTOR |
Hobby Motors
You'll get two-fer-cheap. This permanent-magnet DC motor from Molon operates from 6-12VDC, max efficiency at 12VDC, 11,100 rpm at 1.40A. Measures 1-1/2" long x 1-1/16" dia with a 3/8" long x 3/8" dia striated shaft. Has (2) mounting holes on the face and power tabs on the back. Molon model numbers CMO-1237 and FRS-385S-2358N
 |
37857 MOLON HOBBY MOTOR |
Gear Motor
Open, close or move whatever with this mighty little 3-12VDC 4RPM gear motor designed to operate a vent in a Chrysler product. Draws just 15mA no-load and stalls at 200mA. Output is via a 1/2" dia x 1/2" long sprocketed shaft. The case measures a diminutive 4-1/8" x 3-1/4" x 1" thick with (3) arms with 1/4" mounting holes. No leads, but the gearbox pops open to get into it and there are (2) terminal clips that hit the motor.
|
37244 12 VOLT GEAR MOTOR |
Up Antenna, Scottie!
It's a power antenna made for a car, but nothing says fun like figuring out what else it could do. Has a 12VDC motor and gear-train that draws 800mA. The 5-draw antenna is 41" when extended, but contracts to fit completely into the 14-1/2" x 3-1/2" x 2-1/2" overall unit. Comes with 57" coax cable, a splitter box, matching transformer, (5) different gaskets for trunk/fender mounting, and (3) leads for easy connection.
|
39782 POWER ANTENNA |
Torquey Motor
Cranks out 300-400 inch-pounds of torque, in fact. It's a 12VDC 3.5A (no load) 24 rpm gear motor made to roll out camper units. Includes a brake lever in a rubber boot. The unit measures 9-3/8" x 4-7/8" x 9" overall, with a 2-1/2" dia motor and a main output shaft 3/4" dia x 3/4" long with 1/4" bores opposite each other approx halfway down the shaft. A quartet of 3/16"-14 thread mounting holes surround the shaft, 15" leads. We're thinking home-made winch, small boat-trailer, BBQ crank, monster robotics or kinetic sculpture apps. Weighs 11 lbs.
|
39923 HI-TORQUE MOTOR |
10,000 RPM
Brand new (made for a kiddy car ride with a big gear-box), this reversible 6-12VDC Johnson motor (#141292 and 169324) draws 1.4A and spins 10,000 rpms at 12VDC. Measures 2-1/2" long x 1-1/2" dia with a 1/8" dia x 3/8" long striated shaft. Has (2) tabs on the back for hook-up and (2) mounting holes on the face.
|
37518 10,000 RPM MOTOR |
Little Monster
Call it Whirlaway! It spins 4350 rpm at 6VDC and draws 260 MA and 2.7A at stall. Measures 1-1/2" long x 1-1/16" dia. The striated shaft is 3/32" dia and just over 1/2" long.
|
38151 6VDC MOTOR |
Quickly He Turned…
This diminutive 6VDC Mabuchi motor draws 100 mA, approx 500mA at stall, and spins at approx 1240 rpm. The striated shaft is 1/2" long x 3/32" dia, in a housing that measures 1-3/16" x 1" dia. You get three for one great price for your science fair project, moving display, or latest invention.
|
38143 6 VDC MABUCHI MOTOR |
Spinner
This nice takeout motor is from a Mitsumi cassette drive. Spins approx 2400 rpm at 12VDC, draws 50mA no load and stalls at 650mA. Measures just under 1-1/2" dia x 1-5/16". The 1/16" dia shaft has a single sheave brass pulley 5/16" dia x 1/8". Has (2) 7" leads.
|
39640 CASSETTE MOTOR |
Parsimonious & Petite Motor
But quick. This little 6VDC motor draws only 7mA and stalls at 100mA but spins at approx 1800 rpm. Measures 15/16" dia x 11/16" thick with a 5/16" dia removable 12-tooth gear on a 1/16" shaft. Qijintai model #QJT-310-13400. Born to be used in a science classroom.
|
40026 PETITE 6 VDC MOTOR |
Shop by Popular Tags
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »
