Express Shop!
Search Our Stuff
View Cart (0)
Sign In/Up! (It's Worth It!)
Home
/ Tools
Hey, Punk!
Wanna make your own leather clothes? Start with this 3-piece leather punch set with (2) eyelet punches, 4mm and 9mm, plus a rotary leather punch that makes 2, 2.5, 3, 3.5, 4, and 4.5mm holes. Comes complete with a couple of dozen eyelets for the 4mm and 9mm holes. When you're done, lend them to the old man to let out that belt of his.
 |
92967 LEATHER PUNCH SET |
Popular Tags:
Peggy
craft
2tonechaos
|
Add Tag 
Stakes-N-Flags
For laying out construction sites and parking lots, identifying plants and campsites, designing croquet lawns and gardens, marking snow-covered driveways, helicopter landing pads, rural crime scenes…. The list just goes on and on. Our each is a 50-pack of 21" long thin steel rods with 2-1/2" x 3-1/4" neon red-orange plastic flags on the ends.
|
93505 STAKES-N-FLAGS |
Clearly Handy
Textured, clear polyethylene food-service gloves, but with dozens of other uses. (Think grease- or paint-free fingers.) Our each is box of (200) gloves in medium or XL. They're all ambidextrous, 11-3/8" long from wrist to tip of middle finger, and .00125" thick.
|
38477 MED FOOD GLOVES | |
|
38478 XL FOOD GLOVES |
Popular Tags:
2tonechaos
|
Add Tag
Attention Stampers
And florists, artists, crafters and hobbyists in general. The ProHeater from Surebonder® is a lightweight hand-held heat gun made for curing embossing powders, shrink-wrapping gift baskets, drying ink and glues, shrinking plastic tubing, and similar tasks. The ProHeater is easier to handle and safer than heavy-duty commercial heat guns. It draws approx 350W, will heat to 400°F, and measures 8-3/4" long x 2" x 2" with a 6-foot cord. It has a recessed metal tip inside a 5/8" nozzle and a clip-on table stand. The duty cycle is 10 minutes with a 2-minute cool-down. UL listed.
|
92700 PRO HEATER |
Soldering Iron
Penciltype soldering iron imported from Taiwan. Overlook the charming instructions, it works just the way everyone does. 30 watt 110 volt, nice, serviceable unit.
|
88242 SOLDERING IRON |
Skinny Bits
Skinny mini bits for your mini drill. Our each is a set of (15) high-speed steel drill bits ranging from 1.05 mm to 2 mm. All have 1/16" dia shafts. All fit into marked slots in the compact vinyl storage pouch.
|
92335 MINI BITS |
Popular Tags:
fusionbomb
akmg
bjd
|
Add Tag
Micro Chuck
A really small guy who lives....Whoops! Wrong Chuck. This one is a drill or rotary tool chuck with a 1/8" shank and fits bit sizes #60-#80 to facilitate handling tools with truly small shanks. Very handy in the modeling and electronics worlds.
|
89759 MICRO CHUCK |
Popular Tags:
Tebor
mojoblue66
|
Add Tag
Beauteous Tool
A precision drafting compass too fine to be listed as a school or art supply. This is definitely a tool. The flashy-plastic Helix drafting compass draws a maximum radius of over 6" and comes with attachments to hold thick lead, thin lead, a pencil or a cutting knife, and with extra lead, an eraser, and a classy, clear-plastic storage box. Our "better" model has aluminum legs, is 7-5/8" long, and has a thumbwheel adjustment. Priced so far below list that you can afford to buy one as a school or art supply.
|
36485 HELIX COMPASS |
Set of Router Bits
Circle this one for Santa. The impressive set of (15) carbide router bits with 1/4" dia shanks comes in an 8" x 6-1/4" x 2-1/4" wooden storage case, complete with illustrated labels. And the bits are the ones you want -- 1/8", 1/4", 1/2" and 3/4" dia straight bits; a 1/4" dia panel pilot bit; a 3/8" dia 90° V-groove bit; 1/2" dia mortising, dovetail, flush trim and 45° chamfer bits; an R1/8" cove box bit, R3/8" round over bit, R1/2" cove bit, and R5/32" Roman ogee bit; and, contradicting the list tucked in the cover of the box, a 1-1/4" dia rabbeting bit. Six of the bits have pilot bearings. A nice selection. (If you're Santa, slip this set under the tree for yourself!)
|
92554 ROUTER BITS,SET |
Pistol Pliers
Why bend your wrist when you could bend your tools? Try our extra-long carpal tunnel trio, a 3-piece set that includes: a straight needle-nose pliers with 3-1/2" jaws, a 90° needle-nose pliers, and a long-nose diagonal end cutter. All are 11" long with double-padded grips and flat springs to keep the jaws open slightly. Ideal for reaching engine parts that normal tools can't get a grip on. From Illinois Industrial Tools.
|
93496 PISTOL PLIERS |
Breathable Tape
It's porous, with a cross-hatch pattern that makes it a cinch to tear easily and perfectly straight. Originally for medical uses, we think it's just nice clear tape for a lot of applications. Measures 3" wide x .005" thick, on a 10-yard reel.
|
38471 POROUS TAPE |
Popular Tags:
2tonechaos
Mine
|
Add Tag
Shop by Popular Tags
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »
