
Bet your bottom dollar it will. Be ready for it with this nice solar cell made of glass-enclosed copper indium diselenide. Measures 2-3/8" square x 3/32" thick and is rated for 4.5VDC at 50mA. Has (2) 1" long contact strips for output; the negative strip is marked. Made in the USA.
![]() |
37731 4.5 VDC SOLAR CELL |
We have a number of battery holders, constantly changing in detail. They may be plastic, they may be metal. They all have either simple short wire leads or connection points. In all cases, they hold a number of batteries and connect them internally in series. The table shows the number and type of batteries held, the final voltage, material, lead type and price.
| No. | Type | ||||
|---|---|---|---|---|---|
![]() |
21337 BATTERY SNAP W/LEADS | (1) | 9 Volt | Details | |
![]() |
93221 BLUE SINGLE D CELL HOLDER | (1) | D | Details | |
![]() |
35065 HOLDER, 1 "N" | (1) | "N" | Details | |
![]() |
92475 HOLDER, 1-AA | (1) | "AA" | Details | |
![]() |
92476 HOLDER, 2-AA | (2) | "AA" | Details | |
![]() |
92477 HOLDER, 3-AA | (3) | "AA" | Details | |
![]() |
93190 HOLDER, 4-AA | (4) | "AA" | Details |
The Quad XP-581 from Elenco provides four separate, fully regulated power supplies. Three are fixed and yield +5 VDC at 3 amps, -12 VDC at 1 amp, or +12 VDC at 1 amp. The fourth supply is variable, producing 2.5 to 20 volts of DC output at up to 2 amps. Line and output voltages are regulated to within 0.05 volts, and the supply is linear. All four supplies are shortproof as well. A current foldback circuit in each supply collapses the field in the event of a short, a current surge from the line, or an excessive current demand. Thus, both the Quad XP-580 and the equipment it's driving are normally protected from inadvertent errors or power company problems. Elenco built the supply as only Elenco will. The handsome, hooded metal case, - measuring 3-1/4" x 8-1/4" x 9-1/4" and weighing nine pounds - has a 3-wire grounded power cord for 115 VAC operation, panel meters for both current and voltage, and standard jacks for accessing the four regulated supplies. A two-year limited warranty and schematic is also included.
![]() |
5116 QUAD POWER SUPPLY |
Our medium solar panel is mounted in an aluminum frame and rated at 12VDC with a max voltage (no load) of 15.8. Measures just under 12" x 9-1/2" x 1" and has leads of approx 15 feet. Short-circuit current is 360mA. Composition is monocrystalline silicon. Working temp is -49°F to 185°F. Our larger panel is mounted in an aluminum frame and measures 15-7/8" x 13-3/8" x 1-1/8". Rated at 12VDC with a max output voltage (no load) of 17.6 and current of .88A. Short circuit current is 0.9A. Working temp is -49°F to 185°F and the output is through a covered terminal box on the back. No wiring.
![]() |
93729 LARGE SOLAR PANEL | |
![]() |
39398 MEDIUM SOLAR PANEL |
This MW® regulated power supply draws 120 VAC and delivers constant accurate power to a video game, radio, portable TV, or any device drawing up to 1.5 amps. The 5 1/8" x 3-7/8" x 2-5/8" housing has a rotary dial to designate 3, 4.5, 6, 7.5, 9 or 12 VDC output, and heavy-duty red and black binding posts. Automatic short circuit and overload protection and thermal cutoff. PLEASE NOTE: The many older catalogs mention 6-ft leads with modular plugs. These units no longer include the leads or plugs. Sorry for the inconvenience.
![]() |
92535 1.5A POWER SUPPLY |
Handyman special. You pick a battery holder to fit your project. The D-cell holder is an enclosed hard black-plastic case, 2-3/4" x 6-1/4" x 1-5/8" with space inside for (4) "D"s, designed to give 6V output via a 30" long cord with a 1/8" miniplug. (Originally made to power a tabletop fountain.) The C-cell holder is an open-top white-plastic tray, 2-1/8" x 4-1/4", into which you snap (4) "C"s for 6V output. Attached with a short lead is a 1" square box with a 1/8" jack and a slide-switch to control the power.
![]() |
38680 C CELL HOLDER | |
![]() |
38679 D CELL HOLDER |
The manufacturer calls the model the Keeper®, perhaps because this new lithium thionyl chloride battery was made for a memory backup system. Also used in GPS systems and others, all of which explains the 15-year shelf life. Measures 1-7/8" long x 1" dia and is rated at 3.6VDC 8500mAH. Has 3/16" wide x 3/4" long axial solder tabs. Polarity is marked on the case. Not rechargeable. Great for robotics.
![]() |
37506 3.6V LITHIUM BATTERY |
Our slickest battery charger is hardly bigger than Bobbie Burns' wee sleekit beastie, and even cuter than a mouse. About the size of a nightlight, a mere 3-3/8" x 1-7/8" square, it has a flip-up window, a removable non-polarized plug, and will charge NiMH or NiCd batteries. Will accept (2) "AA" or "AAA" batteries. A pair of "AA" 850mAH NiMH batteries are included at no extra charge.
![]() |
38740 BATTERY CHARGER |
A take-out from a Game Boy" solar pack accessory, this little 3-pack of NiMH rechargeable batteries gives up to 3.6V at approx 1000mAH. The flat pack measures 2-5/8" x 2" x 1/4" thick with solder tabs at opposite corners and, yes, the cells can be separated.
![]() |
36483 3-CELL PACK |
They take a licking but keep on recharging. Take your pick of NiMH batteries from the “AAA”, 800mAh; or the 9V (8.4V at 160mAh). All new. All rechargeable.
![]() |
38966 9V NIMH |
Nice, new 6-volt lantern batteries from Rayovac®, labeled for the international market. Standard 2-5/8" square x 3-3/16" high, standard spring tabs on top. Heavy-Duty, Duraderas, Ultra Robuste, the label says. We'll price it to save you a world of dollars, pesos and francs, Pat says.
![]() |
88182 BATTERY 6V |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »