
Use this dual-cell rechargeable NiMH battery pack as is (it was made for a Panasonic cordless phone) or snip the plastic slat in the middle and you've got a pair of flat-top rechargeable batteries. The 2.4 volt 830 mAH pack measures 2-1/8" x 13/16" x 7/16" thick.
![]() |
39836 RECHARGEABLE BATTERY PACK |
While this rechargeable NiMH battery (Mfr Part #B620) fits (31) different Bell South cordless phones, we like it for its battery potential. Shaped like the Superman emblem (1-5/8" tall x 2" wide at its widest x 7/16" thick) the battery has a 2-1/4" lead and a 6mm-wide 2-pin connector, and puts out 3.6V 280mAH. Inside it you'll find (3) 2/3 "AAA" batteries. The 1-1/8" x 3/8" dia cells have flat-tops.
![]() |
37265 PHONE BATTERY |
This solar panel battery charger comes with a 12VDC 15W tempered-glass, weatherproof amorphous solar panel, 38-1/4" x 13-1/2" x 11/16" thick, with an 11-1/2-foot lead with a 2-pin connector and (4) mounting holes, plus hardware. Includes a pair of 2-foot battery clamps to connect to the battery that you supply, a 10” cigarette lighter plug for car battery charging and a voltage tester. The Solar Panel Set has (4) of the same large solar panels as the battery charger plus a PVC frame to hold them (you do the assembly), 150W max load 7A regulator so you can use up to 7 panels with charging-status LEDs, plus a 120W modular sine wave inverter with (2) outlets, and a cigarette-plug with power and overload-indicator LEDs. Includes all mounting hardware, wiring harnesses, adapter cables and connectors to get you up and running, but you supply the storage batteries. From Sunforce Products™, with a 5-year manufacturer’s warranty. Add the 7Amp solar charge controller. Prevents overcharging of 12 volt batteries.
![]() |
94040 15W SOLAR CHARGER Note: This item is not eligible for Expedited Shipping or delivery to Alaska, Hawaii, or the Territories. |
|
![]() |
94041 60W 4-PANEL SET Note: This item is not eligible for Expedited Shipping or delivery to Alaska, Hawaii, or the Territories. |
|
![]() |
94105 7 AMP SOLAR CHARGE CONTROLLER |
Time to get off the grid with your very own wind turbine. This one, brand new from Sunforce® Products, has a 600W output in either 12V or 24V, with (3) 22-1/4" long nylon and fiberglass blades and a blade span of 51-1/4" total. Body is 27-1/2" long x 10" dia with a 21" high tail-fin/stabilizer. Includes an MPPT (maximum power point tracking) charge controller to optimize battery life and a 30-amp panel meter. Weighs 36 lbs and operates on winds as low as 4 mph and up to 156 mph. It's designed for easy assembly and installation, but you'll need to add your own storage battery and a 2" dia pole to the recommended height of 20 to 30 feet above obstructions. 5 year manufacturers warranty.
![]() |
94230 SUNFORCE PRODUCTS 600 WATT WIND TURBINE Note: This item is not eligible for Expedited Shipping or delivery to Alaska, Hawaii, or the Territories. |
Attention campers: We now have those hard-to-find, not-in-the-battery-section-of-the-place-you-always-buy- batteries, rechargeable 6V 4.6AH sealed lead/acid lantern batteries with spring connectors, along with a charger from the same manufacturer. The charger output is through alligator-clip leads at 6VDC 500mA, with a charge cycle of 10-16 hours. Includes an LED charging indicator. No more cursing the darkness in front of the children!
![]() |
40696 6V BATTERY CHARGER | |
![]() |
40695 LANTERN BATTERY |
$9.95
EACH
Out of Stock. Check Back Soon! |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »