
The plunger itself is 2-7/8" long x 7/16" dia with a 1/2" deep x 1/4" slot and a 3/16" hole across the slot at the end. The Guardian® Solenoid measures 2-1/2" long x 1" dia, with 7" leads, on a removable right-angle mounting plate, 1-1/4" x 2" x 3/4". Rated for continuous duty, the plunger has a pull of approx 1". Draws 424mA at 12VDC, and is rated for 5.3W. Made in the USA.
![]() |
39538 GUARDIAN SOLENOID |
A big guy. This chassis-mounted relay is rated for 30A at 300VAC, 15A at 600VAC, 25A at 28VDC, 1 hp at 120VAC, and 2 hp at 240VAC. Coil will draw approx 40mA at 120VAC, and needs at least 80VAC to engage the (2) sets of SPST contacts. Measures 2" x 1-3/8" x 1-1/2" with 1/4" Q/D terminals on the bottom and a 1/8"-32 mounting hole and a mounting tab on one side. Deltrol part number 23063-70
![]() |
37860 BIG RELAY |
Need a small solenoid with a big attitude? Our 24-Hour Electro-Mechanical Conversion Testing Department tells us these are both "pretty nice little solenoids." (They talk like that.) Our 24VDC pull-type solenoid draws 8.5A at the start and 4.5A to hold. The coil measures 2-1/8" long x 3/4" dia with a 2-pin connector on the bottom and is mounted on a 3-5/8" long x 3/4" wide slotted mounting bracket. The 3" long spring/plunger has a 1-3/16" throw.
![]() |
36133 24 VDC SOLENOID |
This panel-mount relay from White-Rodgers/RBM is rated for 125/277V 1A (up to 3A w/AC only) with a 24V coil that will kick in at approx 9V. Normally closed. Pinout on housing. Measures 1-3/4" x 1-1/8" x 1-5/8" with quick-disconnect terminals and mounting wings that make it 3" across the front. Made in the USA. UL/CSA.
![]() |
11849 RELAY WITH MOUNT |
This 9 VDC, 120 VAC relay will operate as low as 6 VDC. It is 11/16" x 3/8" x 9/16" thick, and has (4) PC-board leads. Great for hobbies, science projects. SPST.
![]() |
33822 9 VDC RELAY |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »