Express Shop!
Search Our Stuff
View Cart (0)
Sign In/Up! (It's Worth It!)
Home
/ Switches
Image Viewing Preferences
You now have the option to view our web site with dazzling color photos or with our traditional hand-drawn line art. It’s a big decision, but don’t worry; you can always change your mind later. Choose your path below. Thanks! If you have a sciplus.com web account we can remember your changes. Sign in to your account or create an account.
Your Basic Wall Switch
Your standard, basic, everyday, found-on-every-wall SPST toggle switch in dark brown. It's from G.E., with the standard 3-3/8" center-to-center spacing on the mounting flanges. Rated for up to 15A at 120V. UL.
 |
40990 40990 BASIC G.E. SPST WALL SWITCH |
Just A Simple Solenoid
This take-out solenoid valve is a simple open/closed solenoid valve that is normally closed. It draws 100mA at 12VDC. Has 3/16" OD inlet and outlet at right angles to each other. Housing measures 1-3/16" long x 15/16" dia with terminals at the back end.
|
40672 12 VDC SOLENOID VALVE |
Power Locks
We thought power corrupts, but it turns out otherwise. Power locks. You could put these in a car door, or think up something really kinetically clever. These brand new 12VDC door lock actuator assemblies draw 2.6A pushing or pulling with a 5/8" throw. Measure 4-5/8" long x 2-1/4" at the solenoid x 1-3/16" thick. Top is a removable plastic ring. Comes with 6-3/4" x 5/8" steel mounting bracket, a 9" rod and assorted screws.
|
93964 POWER DOOR LOCK |
Microswitch
This little (although we suppose that goes without saying) microswitch from Defond is rated for up to 6A at 125VAC or 3A at 250VAC, 1/3HP. The like-new takeout has both N/O and N/C contacts. Measures just under 13/16" x 7/16" x 1/4" with a 5/8" bat. UL.
|
40670 DEFOND 3A-6A MICROSWITCH |
Popular Tags:
Blimus
kyle
pktrememberme
|
Add Tag 
Got Something To Control?
Want to trigger something? Start with this honey of a pre-wired, ready-to-go take-out trigger/speed/polarity assembly from a cordless drill. Includes pre-wired IRFZ44N power MOSFET chip mounted on a heat sink. Feed voltage up to 20VDC to the (2) edge connectors at the shorter leads and attach a motor to the longer ones. The CW/off/CCW switch is below the trigger. The entire assembly measures 6" x 2-3/4" x 1-1/4", not counting the 4" leads.
|
40260 VARIABLE SPEED DRILL TRIGGER ASSEMBLY |
Wanna Toggle?
The correct answer is "I don't know; I've never toggled." If, however, you just want to turn something on and off, here's a choice of toggles for your switching delectation. The DPDT toggle is rated for up to 20A at 125VAC and has screw terminals below. Measures 1-1/4" x 1-3/4". No center-off position. The first DPST toggle is rated for 20A at 125VAC or 15A at 250VAC. Screw terminals on the bottom. Measures 1-5/16" x 3/4". The smaller DPST toggle is rated for up to 4A at 125VAC or 2A at 250VAC. Has 3/16" spade terminals on the bottom and measures 1" X 9/16". All the toggles come with switch-plates and mounting nuts.
|
38715 DPDT TOGGLE 20A (A) | |
|
38716 DPST TOGGLE 20A (B) | |
|
38717 DPST TOGGLE 4A (C) |
Rock On
And rock off, with this snap-fit SPST rocker switch from Gardner-Bender. Rated for up to 20A at 125VAC and 10A at 277VAC. Measures 1-1/2" x 13/16" x 1-5/8" deep, counting the quick-disconnect terminals. UL/CSA.
|
39056 ROCKER SWITCH |
GRACEFUL UNDER PRESSURE
This vertical-mount diaphragm pressure switch, from World Magnetics", is rated for 3A at 120VAC. NO/NC switch contacts. Waterproof. Pressure is 1 psi and bursting point is 2.5 psi. For use with air or "compatible fluids" which would be a liquid that doesn't eat plastic. Inlet and outlet are 1/4" to 3/8" multi-barb. Measures 3-1/8" dia x 1-3/4" with standoffs at the bottom for mounting. Ports are on top, switch is on the back.
|
40008 NO/NC AIR PRESSURE SWITCH |
Relay Twofers
12VDC relays are on special this week. The 1A special is a 2-pack of little lower-power relays from Kest Manufacturing. Each measures 13/16" x 3/8" x 7/16". Load contacts are rated for 125VAC 1A or 30VDC 2A. Dual sets of NO/NC contacts. Pin-out diagram on the bottom of the housing. UL. The 10A from Omron has both NO and NC contacts and is rated for up to 10A at 250VAC. Its 12V coil gets power at pins 2 & 5; pin 1 is the common; and pins 3 & 5 are NO and NC respectively. Measures 7/8" x 5/8" x 11/16" high. UL/CSA.
|
40804 12VDC 10A RELAY | |
|
94217 12VDC 1A RELAY |
Togglers
All from GB® (Gardner Bender) or IDEAL® all bargains. The small SPST toggle switch, 1" x 1/2" x 1/2", has a switchplate, 3/8" bat, and 5-1/2" leads. Both panel mount DPST toggle switches, 1-3/8" x 3/4" x 1-1/8" OA, work with larger motors or appliances. Has screw terminals on the bottom and mounting hardware. The 1-1/8" x 5/8" x 1" deep OA momentary SPDT toggle switch, center off, is for back-and-forth switching, as with a winch. It's 3/4 HP max. Includes mounting hardware. The IDEAL® DPDT toggle switch is center off, 1-5/16" x 3/4" x 1-1/8" deep OA, comes with mounting hardware and is latching. All are UL/CSA.
| Amps | Volts | |||
|---|---|---|---|---|
|
40042 DPDT TOGGLE CENTER OFF (IDEAL®) | 10/20/ | 250/125 | |
|
39051 DPST TOGGLE (GB) | 10/20 | 250/125 | |
|
40041 DPST TOGGLE (IDEAL®) | 10/20 | 250/125 | |
|
39052 MOM SPDT TOGGLE (GB) | 20/10 | 125/177 | |
|
39050 SMALL SPST TOGGLE (GB) | 6/3 | 125/250 |
Popular Tags:
ctw
zappenfusen
iwanna
|
Add Tag
When Is A Switch Like A TV Show?
When it has Red Buttons. These latching push-button switches, while they never had their own TV variety show, are still quite popular. They're SPST and rated for 250V 1A. The housing is 15/16" long x 7/16" dia with mounting nut and washer and with (2) 1/8" wide terminals. The push-button is 9/16" square, and red, sits in a black plastic sleeve, and will stand 7/16" off the face of your case.
|
93963 RED BUTTON SWITCH |
Shop by Popular Tags
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »
