Express Shop!
Search Our Stuff
View Cart (0)
Sign In/Up! (It's Worth It!)
Home
/ Switches
RED LED
An LED that really shines. The red LED is configured with a resistor and works at 9-12 volts. It's held by a 1-5/8" bracket behind a 1-1/4" x 7/16" x 5/16" deep SPST slide switch, and has (2) 4" leads. All ready to roll.
 |
32884 9-12 VOLT LED |
Microswitch
Microprice! Black plastic Normally open/normally closed switch is 3/4" x 1/4" x 3/8", with a small button on top, (3) spades on the bottom, and (2) 3/32" dia mounting holes on the side. Ratings unknown. That's all we know!
|
29025 MICROSWITCH |
Popular Tags:
zappenfusen
waltsvw
qrxzzzz
|
Add Tag 
Push On
And see the red light. This panel-mount SPST push-on/push-off switch from Molex is rated for 125V and has a neon indicator lamp. Measures 2-1/4" x 15/16" x 1/2" with 3/16" quick-disconnect terminals. The panel face is 1-5/16" x 1/2" with plastic wings to keep it in place. The button is marked "AEC." Two contacts for the switch; two contacts for the lamp (diagram included). Latching. UL/CSA. Made in the USA.
|
37326 MOLEX SWITCH |
Four Season Switch
The four positions on this 2" x 1-5/16" x 7/8" rotary switch represent the four seasons of the year. The spring position turns on terminals 1 and 5. The summer position turns on all of the terminals. The fall position turns on terminals 2,3,5 and 6. On the winter setting, the time of year when all is quiet and dead, none of the terminals are turned on. All of the terminals have spade connectors and terminals 2 and 3 are joined. The switch has a 7/8" x 1/4" dia. fluted shaft and is mountable via. (2) threaded holes on the face plate. 25 amp at 125 VAC max.
|
29723 FOUR SEASON SWITCH |
Rocker-Switch Plate
It's special. Our 4-1/2" x 2-3/4" white-plastic switch plate has a generous 2-5/8" x 1-5/16" center cutout and fits a wide, push-type rocker switch rather than a standard toggle. Includes mounting screws.
|
34431 WHITE SWITCH PLATE |
Ready-To-Mount Relay
This panel-mount relay from White-Rodgers/RBM is rated for 125/277V 1A (up to 3A w/AC only) with a 24V coil that will kick in at approx 9V. Normally closed. Pinout on housing. Measures 1-3/4" x 1-1/8" x 1-5/8" with quick-disconnect terminals and mounting wings that make it 3" across the front. Made in the USA. UL/CSA.
|
11849 RELAY WITH MOUNT |
Relay
This 9 VDC, 120 VAC relay will operate as low as 6 VDC. It is 11/16" x 3/8" x 9/16" thick, and has (4) PC-board leads. Great for hobbies, science projects. SPST.
|
33822 9 VDC RELAY |
Keep On Rocking
Easy with our illuminated SPST rocker switch, rated for up to 6A at 125VAC or 10A at 250VAC. Snaps into a 1/2" x 1-1/8" panel bore. From Gardner-Bender®. Has pin-out diagram on the package. UL/CSA.
|
39168 ROCKER SWITCH |
Illuminating Moment
A cool double pole double throw momentary rocker switch. The rocking switch lever is white plastic with a 24 V bulb in it. Wire it so the lamp is always on, flashes when pushed, is on except when pushed....whatever you want. The switch is rated for 3 amps @ 125 VAC and has solder terminals. 1" x 3/4" x 1-3/8" from the tip of the rocker to the base of the solder terminals at the back. Cory suggests applying it to your rocket launcher.
|
29732 MOM ILL ROCK SWITCH |
Kaboom
One of our truly unusual treasures. It's a used 28 VDC single-pole/single-throw toggle switch, possibly military surplus. A sensor mounted on it is labeled Oxygen Warning Switch. We think that means that it switches off in the presence of pure oxygen, the better to keep from blowing something to kingdom come with an errant spark. Overall, it's 3-1/2" x 1-1/2" x 1", not counting the 3/4" toggle. The 3-pole sensor itself is under a black-painted aluminum cover 1-1/2" high x 7/8" dia. (3) leads, (3) holes in its right-angle mounting bracket. We're just not sure what it is that would be blown up if it weren't there.
|
32864 OXYGEN SWITCH |
Popular Tags:
sindicate
alteredbit
zappenfusen
|
Add Tag
Rotary On/Off
Just like your love life?? This switch turns between on and off when the 1/4" dia x 7/8" long shaft is rotated 90°. Rated 120 VAC, 10 amps, it is 1-1/2" x 1" x 1" deep. (2) threaded mounting holes on the face plate and (2) spade connectors complete the picture.
|
29731 ROTARY SWITCH |
Shop by Popular Tags
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »
