
Ten electrical leads with an alligator clip on each end. Each lead is about 20" long, not counting the 'gators. Vinyl coated 20-22 ga. wire with a vinyl cover over each clip. They come in an assortment of five colors with two leads in each color. The manufacturer calls them heavy duty but we would restrict them to the light currents and low voltages you will be using in your home experiments. Our each is a set of (10).
![]() |
11586P1 ALLIGATOR CLIP LEADS | |
![]() |
11586P3 ALLIGATOR CLIP LEADS 3 PACK SAVINGS |
Just plug this set of 2-contact flat molded connectors into each other. (Each one has both a male and a female port.) Yes, they're on opposite ends of 10" long red and black, 16-2 AWG leads, but that's just a device to keep them together. When you're ready to hook them up, just clip those leads and get each end wired. You'll get a pack of (2) complete sets, perfect for hobbyists, tinkerers, and electronic DIYers.
![]() |
39379 2-PIN CONNECTOR |
This pristine new take-out fused panel from a film projector (remember them?) has a DPST rocker switch and an IEC input plug that feeds a 3A fused line and an 8A line that leads to a load-protected relay. Panel measures 4-3/8" x 5-1/8" overall and needs 4" clearance in back. Made in the USA.
![]() |
40828 FUSED PANEL WITH DPST ROCKER SWITCH |
Start with one naked wire or a number of them, and a piece of our clever tubing, and end up with nice, tightly covered wire. For the specific diameters below, our each is a package of (10) 12" pieces of heat-shrink tubing. For an assortment of sizes, our each is a dozen pieces of 4" long tubing. You'll get (4) pieces each in 1/8", 1/4" and 1/2" diameters. All sizes are black. All will shrink to trim diameters half their current size when heated to 125°C/257°F. If only it worked on waistlines.
![]() |
92441 1/2" SHRINK TUBE | |
![]() |
93365 1/8"-1/2" ASST. SHRINK TUBE |
You could crimp all day and all night with this assortment of (160) insulated solder-less crimp-connect wire terminals. Includes ring, male connect, female disconnect, butt connect, spade, quick-splice and bullet connectors for 10 to 22 AWG wires, color-coded for gauge. In a snap-shut translucent plastic case.
![]() |
94158 WIRE CRIMP TERMINALS |
Neatness definitely counts. Even in wiring. Especially in wiring. End those electrical mare's nests with this 6-position barrier strip, rated for up to 30A at 600V. Comes with a clear plastic cover with access to the screw terminals and measures 3-5/8" x 1-1/4" x 5/8" with a 5/16" mounting hole at each end. Terminals are in pairs.
![]() |
93962 BARRIER STRIP |
Mini-clips (aka alligator clips) let you make your own low-voltage jumper leads, or repair broken leads on test equipment and chargers. The kit includes (2) 30 amp clips, (2) 25 amp clips, (2) 10 amp clips, (6) 2" clips and (6) 1-1/2" clips, all of which are insulated, plus (10) naked alligator clips.
![]() |
92074 CLIP KIT |
Good uns, too, that stay put. You'll receive a bag of (50) of these cable staples with long brads. Each white plastic staple measures 1/2" x 1/4" ID with a 1-1/8" brad on each end. You'll need a hammer. Suitable for 14/2 non-metallic cable. UL.
![]() |
39134 50 CABLE STAPLES |
Our black-vinyl heat-shrink tubing is 1/4" dia, already cut into 2" lengths, and shrinks to half its diameter. The tubing is marked "fuse link 20 ga." You'll get a package of (20) tubes.
![]() |
15500 HEAT SHRINK TUBING |
Like blue jeans, but for wires. So you can color-code those wires instead of getting all confused. You get a 10-pack of 12" long x 9/32" pieces of heat-shrink tubing, (3) each of white and red, (4) of black. Rated for up to 600V 125°C. UL.
![]() |
93925 HEAT-SHRINK TUBES |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »