
And dimmer, and dimmer. For sunset fans, or anyone who hates sudden change, this socket screws into a standard sized light socket and dims an incandescent bulb (up to 150W) slowly from high, to medium, to low, and then off, over a period of thirty minutes. You can start the cycle at any level. Also functions as a standard touch-light dimmer. From GE's SmartHome" series. UL.
![]() |
38723 GE® DIMMER |
Good golly. You too, just like Miss Molly, can be rocking in the house of blue, red or green lights. Party Lite bulbs fit standard medium-base light-bulb sockets. These party mood-illuminators are 25W, because the house of blue lights is always kept dimly lit, for the atmosphere.
![]() |
90365 BLUE PARTY LIGHT | |
![]() |
90367 GREEN PARTY LIGHT | |
![]() |
90368 RED PARTY LIGHT |
This Leviton socket for a standard incandescent bulb is rated at 250 VAC 660 watts. It is 1-7/16" long x 1-1/4" OD, with terminals made to press-fit 12-14 AWG wire. Mount it via the small L-bracket in the vertical arm. Remove the bracket and it's great for a design-it-yourself lamp.
![]() |
34283 SINGLE SOCKET |
$1.00
EACH
Out of Stock. Check Back Soon! |
This tiny 2-5/8" long x 5/8" dia red laser pointer has a white, super-bright LED on a 3-5/8" long goose-neck on the front end. The bottom has a magnet mount and the body has a slip-on pocket clip. Comes with (3) button cell batteries. Nifty little promo item, and having an obscure address or ad on it lets you buy it at this unbelievable price. More than worth it!
![]() |
38458 LASER LIGHT |
A variety of heat shrink tubing pieces. You get (10) pieces, each (1) foot long for a small price. Size Small means each piece will be at least 1/16” but not over 1/4” OD before shrinking, and about one half that after shrinking. Large diameters will range from 1/4” to 1-1/2”. Each may be red, black white, yellow or who knows what color. Snip them into smaller bits. Use them end to end for longer pieces. You can’t go wrong with this deal!!
![]() |
26041 HEAT SHRINK TUBE, LG | |
![]() |
22776 HEAT SHRINK TUBE, SM |
Start with one naked wire or a number of them, and a piece of our clever tubing, and end up with nice, tightly covered wire. For the specific diameters below, our each is a package of (10) 12" pieces of heat-shrink tubing. For an assortment of sizes, our each is a dozen pieces of 4" long tubing. You'll get (4) pieces each in 1/8", 1/4" and 1/2" diameters. All sizes are black. All will shrink to trim diameters half their current size when heated to 125°C/257°F. If only it worked on waistlines.
![]() |
92441 1/2" SHRINK TUBE | |
![]() |
92440 1/4" SHRINK TUBE | |
![]() |
92439 1/8" SHRINK TUBE | |
![]() |
93365 1/8"-1/2" ASST. SHRINK TUBE |
Brought to you by our portable plasma device. The 2-3/4" dia flat disc has a full-on mode or will pulsate to the beat of the music with red, blue and green lightning streaks, but the sensitive sound sensor also produces great results when you talk near it. The disc sits on a 2-1/4" x 1-3/4" x 5/8" thick case with a belt clip, or could be hung on a neck lanyard. (The lightning will also follow your fingertip if you touch it!) Call it a disco-must (the darker the room the better) or just wear it any time you feel like pulsating. What powers this bad boy? The (2) "AAA" batteries that you provide.
![]() |
93048 POCKET PLASMA |
We're very fond of this mesmerizing ovoid. It's a translucent-white, soft-rubber egg with LEDs inside, 3-5/8" tall x 2-3/4" dia at its egg waist, as it were. Turn it on and it morphs slowly through a series of attractive pastel colors. No Easter basket would be complete without one. Placed on a desk or nightstand, we think it can produce lasting inner peace. Which is hard to find these days. The 3-5/8" wide triangular silver-colored charging stand has an indicator and a wall adapter, and will power it when it's on the base, or charge its internal NiMH battery (over 8-10 hours) for 500 cycles (about 6 hours) of stand-alone morphing. Mighty nice, Paul says, now that he's found his inner peace.
![]() |
93074 OGGZ |
The perfect nightlight for the laboratory or for the mad scientist at home, each heart-shaped plasma bulb screws into a mini-socket (1/2" dia) in the included, switched, wall-outlet adapter, or can be unscrewed and moved to any candelabra socket. It strobes happily along by itself, but will follow your finger, or the cat's paw, like good plasma lights everywhere.
![]() |
37876 PLASMA HEART |
Mini-clips (aka alligator clips) let you make your own low-voltage jumper leads, or repair broken leads on test equipment and chargers. The kit includes (2) 30 amp clips, (2) 25 amp clips, (2) 10 amp clips, (6) 2" clips and (6) 1-1/2" clips, all of which are insulated, plus (10) naked alligator clips.
![]() |
92074 CLIP KIT |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »