
Light emitting diodes. Solid state devices that provide the ubiquitous power and indicator lights on your electronic gadgetry. Unlike lamps, there are no filaments that glow. Rather, some two volts of DC power at a miniscule 10 to 20 milliamps of current get the chemistry excited, and they just plain emit. Emit is a good word, too, as they don't really cast light, but glow brightly. We have a nice assortment of 3 and 5 MM diameter sizes in red, green, orange, and yellow. The longer lead is always positive, the shorter always negative, and you always need a current limiting resistor (about 500 to 1,000 ohms for 5 to 9 volt DC sources) to keep the current in the 10-20 MA range. If that's Greek to you you're either going to blow a lot of LED's or learn to change incandescent indicator lamps ! !
![]() |
6796 LED ASSORTMENT |
The big stuff: translucent white heat shrink tubing at 3/4" dia. Like most heat shrink, this one shrinks to half its size when heated. You get (2) 4-foot pieces, for a total of (8) feet, and it will be bent for shipping, but that won't hurt it. The internationally renowned heat-shrinking department here at the home office suggests using a heat gun, not a disposable lighter, for shrinking this stuff.
![]() |
37753 HEAT SHRINK TUBE |
This uncoated 18–gauge copper wire is available by the 50–foot hank. It’s 16–strand grounding wire, 1/3” lay.
![]() |
35156 COPPER WIRE, 50-FT |
on the subject with this 18" long x 5/8" dia blacklight bulb. Should mate with any fixture taking 18" long x 5/8" dia. fluorescent bulbs. Draws 16W at 120VAC and makes white shirts look all spooky and stuff, dude. Has a standard 2 prong tip on each end.
![]() |
36852 BLACKLITE BULB |
So that your wheat can see where it's growing. OK, they're really for all those teeny-light needs: dollhouses, models, robots, train sets, like that. This set was made to be a repair kit for Aura Grain of Wheat rope lights, and you can still use it for that, but you'll get an 18" length of 3/8" dia clear or colored rope with (18) white lights inside, plus (2) 1-3/4" pieces of clear shrink-wrap tube, and (2) 2-pin splice connectors. The 18" length operates at 120VAC & draws approx. 9 watts. Use it as is or slice the tube and remove the 6 volt GOW lights. Need to fancy up your train layout? Add tee connectors, and go to it!
![]() |
35725 GRAINS-OF-WHEAT, BLUE | |
![]() |
35723 GRAINS-OF-WHEAT, CLEAR | |
![]() |
35727 GRAINS-OF-WHEAT, GREEN | |
![]() |
35724 GRAINS-OF-WHEAT, RED | |
![]() |
35726 GRAINS-OF-WHEAT, YELLOW | |
![]() |
35729 TEE CONNECTOR |
Or tongue of fire, anyway, unless you buy two. This extremely cool, pulsating red and blue glass plasma lamp is an undulating pointed ribbon shape (you Kiss fans can just think Gene Simmons' tongue), 17-3/4" tall OA, and as eerily fascinating as, well, Gene Simmons' tongue. Draws15W at 120VAC and stands in a 6" x 7-5/8" x 3" tall black oval base with a power switch and 6-foot cord. UL/CSA.
![]() |
93137 RIBBON ELECTRA |
$26.95
EACH
Out of Stock. Check Back Soon! |
Cage the wild light bulb in order to protect it from its natural enemy, Vandalus urbanosa. Unlike the domestic indoor bulb which can be protected with a silk or paper shade, this more-endangered bulb is found outdoors or in rugged industrial habitats. Our yellow-plastic cage is available for bulbs of 100 watts or less. (Bulb should not touch plastic.) This cage is 6–1/2” long x 5” dia at its widest point. One side has a release latch for access to the bulb. They fit over a medium-base socket to protect the lamp in it. Hardware included.
![]() |
35216 PLASTIC CAGE |
The tiny unit, 3-3/4" x 2" x 2-5/8" OA, projects a bunch of scintillating red laser patterns on some otherwise dull surface, like your wall. It has controls for patterns and direction, plus manual or automatic operation, a demo mode, wrist strap, and a fold-down easel so you can set it up and boogie along instead of holding it for your friends. Runs on (3) "AAA"s, included.
![]() |
93347 POCKET LASER SHOW |
This staggeringly vivid night-sky projector features green, laser-beamed moving stars and cloud cover and, according to Paul (our in-house astro-galactic display maven), "adjustable-intensity nebula." If that means you can lie supine and happily stare at it for a few hours, we agree, particularly if you cue up the Dark Side of the Moon album at the same time. Or skip the Pink Floyd, and use it to lull the children to sleep. Not an astronomically accurate sky, of course, but you're definitely not going to care. The unit is approx 11" tall on a 9-1/2" x 8-3/8" oval base and plugs in via a wall adapter. The manufacturer suggests a maximum 4-hour duty cycle, white or light walls and a very dark room. Has mounting slots on the base.
![]() |
93184 LASERSTARS |
LEDs in assorted colors and sizes for displays, hobbies, robotics, electronics and more.
| Color | Size | ||||
|---|---|---|---|---|---|
![]() |
31627 5MM 3V LED RED | Red | 5mm Dia. | Details | |
![]() |
31632 5MM 3V LED YEL | Yellow | 5 mm | Details | |
![]() |
31620 5X3MM 3V LED ORNG | Orange | 5 mm x 3 mm Dia. | Details | |
![]() |
31629 5X5MM 3V LED RED | Red | 5 mm x 5 mm Dia. | Details | |
![]() |
31652 6X3MM 3V LED ORNG | Orange | 6 mm x 3 mm Dia. | Details | |
![]() |
31655 9X5MM 3V LED ORNG | Orange | 9 mm x 5 mm Dia. | Details | |
![]() |
31623 9X5MM 6V LED GRN | Green | 9 mm x 5 mm Dia. | Details |
Turn one grounded outlet into three grounded outlets. Our orange-plastic 3-way "T" adapter for wall outlets is vertically oriented so it won't block the adjacent outlet. Made for indoor use in dry locations. Max 15A. UL.
![]() |
93232 3-OUTLET TAP |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »