
A variety of heat shrink tubing pieces. You get (10) pieces, each (1) foot long for a small price. Size Small means each piece will be at least 1/16” but not over 1/4” OD before shrinking, and about one half that after shrinking. Each may be red, black white, yellow or who knows what color. Snip them into smaller bits. Use them end to end for longer pieces. You can’t go wrong with this deal!!
![]() |
22776 HEAT SHRINK TUBE, SM |
If you can't tell, maybe you should have installed this nice little 120VAC neon pilot lamp. It's attached to (2) 7" leads, draws less than 20mA, and does not need a limiting resistor. And you'd still have (9) left for robotics, hobbies, science fairs.
![]() |
37792 PILOT LAMP |
Turn one grounded outlet into three grounded outlets. Our orange-plastic 3-way "T" adapter for wall outlets is vertically oriented so it won't block the adjacent outlet. Made for indoor use in dry locations. Max 15A. UL.
![]() |
93232 3-OUTLET TAP |
The big stuff: translucent white heat shrink tubing at 3/4" dia. Like most heat shrink, this one shrinks to half its size when heated. You get (2) 4-foot pieces, for a total of (8) feet, and it will be bent for shipping, but that won't hurt it. The internationally renowned heat-shrinking department here at the home office suggests using a heat gun, not a disposable lighter, for shrinking this stuff.
![]() |
37753 HEAT SHRINK TUBE |
Super handy things to have around your workshop. These line cords are all made up with molded plugs on one end to give your projects that professional finished appearance. Great for repairs...and to replace an existing cord with one that is the proper length for the new location. New, (except as noted) and first quality.
| Gauge | No of Wires | ||||
|---|---|---|---|---|---|
![]() |
20619 LINE CORD, 18' | 18 | 3 | Details | |
![]() |
35222 LINE CORD, 9' EUROPEAN | 14 | 3 | Details |
A nice green LED that is rated at 3 VDC 55 mA, but works at 4.5 VDC 120 mA. The first 1-1/4" of the leads are sheathed, and hold the LED upright. The remaining 8-1/2" of twisted leads end in a 2-pin connector.
![]() |
34655 GREEN LEDS |
Very pretty. Very graceful. These clear-glass 2.2 volt, .25 amp bulbs are a wavy, flame shape 1-1/2" tall and 5/8" dia at the widest point. The base is candelabra size. They work fine on 3 volts (2"AA") at .32 amps. For a special look, hook (50) up in series and use them at 120 VAC. Order extras, because we don't think you'll find little pretties like these at your local hardware store.
![]() |
33794 CANDELABRA BULBS |
Or tongue of fire, anyway, unless you buy two. This extremely cool, pulsating red or red & blue (Our choice.) glass plasma lamp is an undulating pointed ribbon shape (you Kiss fans can just think Gene Simmons' tongue), 17-3/4" tall OA, and as eerily fascinating as, well, Gene Simmons' tongue. Draws15W at 120VAC and stands in a 6" x 7-5/8" x 3" tall black oval base with a power switch and 6-foot cord. UL/CSA.
![]() |
93137 RIBBON ELECTRA |
This is a nice LED at a great price. The diffused-red LED with a T1 case measures 0.119" dia, or just under 1/8". The leads are about 1" long, with the positive a bit longer than the negative. It runs on 2.5 VDC at 20 MA. In a series with a 220 ohm resistor, you can run it at 5 VDC. In a series with a 1000 ohm resistor, at 12 VDC.
![]() |
28998 SMALL RED LED |
This lamp is as cute as a monkey! All right, this lamp is a monkey. The little guy is hugging a palm tree under a dark-brown, textured, clip-on shade. The painted polyresin lamp is 12-1/2" tall OA, and has a candelabra socket and a 5-ft cord with an in-line thumbwheel switch. And the monkey's smiling, because even though the lamp has a European plug, we've thoughtfully included an adapter. Now it can be plugged into a standard American outlet, and you get to buy a new 110-volt bulb or use the 220-volt bulb that came with it as a nightlight.
![]() |
35406 MONKEY LAMP |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »