
Good uns, too, that stay put. You'll receive a bag of (50) of these cable staples with long brads. Each white plastic staple measures 1/2" x 1/4" ID with a 1-1/8" brad on each end. You'll need a hammer. Suitable for 14/2 non-metallic cable. UL.
![]() |
39134 50 CABLE STAPLES |
The first advance in Easter Island monolithic heads since the taming of electricity. We're calling it the Nightlight of the Polynesian Gods, and you can now own one your very ownse'f. This 10" tall glass replica of a Moai head statue has a plasma lamp spraying very active streamers inside. It's blue glass when at rest, but turns a rich green when activated. On a 6" x 4-3/4" x 2" high black oval base with a 6-foot power cord.
![]() |
93606 EASTER ISLAND LIGHT |
Itty bitty 1/4 W lamp with a 3/16" screw base. 1/2" long overall it needs 160ma @ 2.5 V. It has a clear glass envelope that collimates the light at the end for greater intensity when viewed end on.
![]() |
29994 LAMP, T-5.5 |
Like blue jeans, but for wires. So you can color-code those wires instead of getting all confused. You get a 10-pack of 12" long x 9/32" pieces of heat-shrink tubing, (3) each of white and red, (4) of black. Rated for up to 600V 125°C. UL.
![]() |
93925 HEAT-SHRINK TUBES |
Wire up those bowling trophies, or just rewire those lamps with the ugly black cords. You get a package of (4) white 18-2 AWG lamp cords, 48" long, with plugs on one end. Cheap, cheap.
![]() |
38871 LAMP CORD |
Our black-vinyl heat-shrink tubing is 1/4" dia, already cut into 2" lengths, and shrinks to half its diameter. The tubing is marked "fuse link 20 ga." You'll get a package of (20) tubes.
![]() |
15500 HEAT SHRINK TUBING |
Retro starts with looking backwards. Try this 4-3/16" dia 12VDC red-plastic Fresnel-lens taillight. Has a clear plastic window, 3-1/4" x 1-1/2", on the housing behind the lens. Measures 3-1/8" deep to the back of the housing, with (2) 3/4" long x 1/4" - 20 mounting bolts and 6" leads.
![]() |
40895 12VDC ROUND RED-PLASTIC TAILLIGHT LENS |
Light emitting diodes. Solid state devices that provide the ubiquitous power and indicator lights on your electronic gadgetry. Unlike lamps, there are no filaments that glow. Rather, some two volts of DC power at a miniscule 10 to 20 milliamps of current get the chemistry excited, and they just plain emit. Emit is a good word, too, as they don't really cast light, but glow brightly. We have a nice assortment of 3 and 5 MM diameter sizes in red, green, orange, and yellow. The longer lead is always positive, the shorter always negative, and you always need a current limiting resistor (about 500 to 1,000 ohms for 5 to 9 volt DC sources) to keep the current in the 10-20 MA range. If that's Greek to you you're either going to blow a lot of LED's or learn to change incandescent indicator lamps ! !
![]() |
6796 LED ASSORTMENT |
Whole lot of flashing fun from Lite-Upzz™. You pick from our assortment of flashing flat designs, each plugged into a silver plastic base, 3" dia x 1-1/8" tall, with an on/off switch and a mode button that lets you cycle through (8) different light patterns. The flat lamps are all approx 3" to 4" tall. You pick from: a lovely beach/palm tree/flamingo scene; flashing star; pulsating heart; yin-yang sign; or an eyeball with "I Can See You" message.
![]() |
38749 FLAMINGO LITE | |
![]() |
38786 HEART LITE | |
![]() |
38784 STAR LITE | |
![]() |
38750 YIN-YANG LITE |
Start with a 4-mode flashlight, a 3" long anodized aluminum tube with a bright-white LED light, attached to a small slip-ring. If you're an usher, tour guide, teacher or anyone who needs to get attention in a darkened place, add the 4-1/4" long translucent acrylic wand that screws into it. The light runs on (4) included button-cell batteries and has off, blink, fast blink and constant-on modes.
![]() |
39531 LIGHT-WAND |
These wonderful lights that are all but invisible, but make whites “glow in the dark”!! Great for Halloween parties, dances, and stimulation of any phosphorescent materials. To avoid eye damage, please do not look directly at the light. This model comes complete with a lighting fixture, reflector, and 18” blacklight fluorescent tube. This fluorescent model has a 18 watt bulb and 6 ft cord for a standard 120 vac wall outlet with a switch. Great goolish fun! (Please note: The "bulb" types do not glow as well as the flourescent types)
![]() |
89402 120 VAC FLUORESCENT |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »