
A big grab bag of LED display tiles. Assorted colors - red, green, amber - and displays. Small are 1" x 2" and smaller; 3-9 volts; and include seven-segment numeric, dot matrix, and alphanumeric. Sorry, we can't tell you what size or display you'll get, but Small has at least (4) different. Think of it as a surprise present from Uncle Barry. Hook 'em up and find out what he gave you!
![]() |
29233 LED DISPLAYS, SM |
Good red neon indicator light of the square variety. Operates on 125 VAC, 1/3 W. It snaps into a 1-1/8" x 1/2" panel hole and is 1-5/16" deep including the (2) spade connectors. The white plastic bezel and housing surrounds a 13/16" x 3/8" red lens. Probably an on indicator from an appliance or tool.
![]() |
23744 RED NEON INDIC. LIGHT |
The tiny unit, 3-3/4" x 2" x 2-5/8" OA, projects a bunch of scintillating red laser patterns on some otherwise dull surface, like your wall. It has controls for patterns and direction, plus manual or automatic operation, a demo mode, wrist strap, and a fold-down easel so you can set it up and boogie along instead of holding it for your friends. Runs on (3) "AAA"s, included.
![]() |
93347 POCKET LASER SHOW |
$17.95
EACH
Out of Stock. Check Back Soon! |
Nice little indicator light for a 6 Volt circuit. As in auto and boat. 1-5/16" x 13/32" x 15/16" deep to fit a 1-1/4" x 1-3/8" panel hole. (2) quick connect terminals on the back. The lamp is incandescent and the front is open...It needs a lens or covering of some sort. Could be a good light for use in model work.
![]() |
22717 INDICATOR LAMP, 6 V |
Which makes them wire nuts. Our each is a package of (9) in (4) colors/sizes, suitable for 22 to 8AWG. Made in the USA by Gardner-Bender. UL/CSA.
![]() |
36680 WIRE CONNECTORS |
This tiny 3 mm LED sits in a 5/32" x 1/4" x 7/32" black-plastic box with PC board mounts. At 2-3 volts it glows green and draws 40 mA.
![]() |
33823 2-3 VDC LED |
Neon indicator lamp, complete in a snap-in panel mounting. The mounting bezel is 7/8" x 1-1/2" and the lamp lens is 7/16" x 7/8". UL and CSA rated for 3/8 watts, 125 V. It has (2) spade connectors and should be great for the model railroad control panel.
![]() |
32455 RED NEON LAMP |
Our black-vinyl heat-shrink tubing is 1/4" dia, already cut into 2" lengths, and shrinks to half its diameter. The tubing is marked "fuse link 20 ga." You'll get a package of (20) tubes.
![]() |
15500 HEAT SHRINK TUBING |
This little 120 VAC, 40 mA neon indicator lamp is 3/8" x 7/32" dia, with 1" wire leads. It has clear glass and a nice orange glow, but with its 150 ohm resistor it's a little dim to be used in bright light. We suggest you use it in darker surroundings, because you don't want to remove the resistor. Like we did....
![]() |
31636 120 V NEON LAMP |
Get twice the light. The (2) sockets for standard incandescent bulbs have crimp terminals with jumper leads. (Use 18-gauge wire.) The single steel bracket between them has (1) 3/8" threaded mounting hole in the center. Picture an older ceiling fixture, or a light above a medicine cabinet. They are rated at 250 volts, 660 watts each. The double socket is 4-1/4" x 1-1/4" dia OA. UL/CSA listed
![]() |
34282 DOUBLE SOCKET |
Yeah, we've had that problem, too. Comes of pulling 'em out of dark dresser drawers. The Genius Light is a tiny, 2-3/8" x 1-3/16" x 3/4" thick oval with a pair of white battery powered LEDs inside, operated by a magnetic switch. Mount the self-adhesive light and the self-adhesive 1/2" x 3/16" x 3/8" plated magnet within 1/2" (ignore the 1" directions) of each other on opposing surfaces in a drawer, door-frame, cabinet, or fuse box, wherever you need a little light without any wiring. Open the door/drawer and the light goes on. Magical, no? Our each is a pack of (2) lights and magnets. Includes (3) button cell batteries for each light.
![]() |
37571 GENIUS LIGHT |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »