
Missing calls? Set this in-line telephone ringer on high, and incoming calls will chirp like a 900-lb canary that's been hit with a cattle prod. For the deaf, for extraordinarily noisy environments, or for those who are keeping the noise down after bedtime, the ring can be turned off, leaving a handy neon indicator lamp to signal a call. Measures 4-1/4" x 2-1/2" x 1" thick OA, and has a high/low/off switch. Comes with a 3-foot phone cord and needs no other power. Made in the USA for Philips.
![]() |
39017 PHONE RINGER |
One too many jerks on your phone? Fix that loose connection with a new telephone cord. Our replacement set includes (1) 80" wall-to-phone line cord and a matching 16" coiled handset cord that extends to approx 6 feet, with modular plugs on both ends of both cords. The sets are forest green, white, taupe, light blue, dark blue, and whatever shows up next. Our choice, but we'll give you (4) sets in at least (2) different colors, at a price that will ring your bell.
![]() |
35359 PHONE CORD SETS |
Our 4-1/2" long x 2" wide x 1" deep cell phones fit nicely in this black-leather carrying case. The front is a 2-1/2" x 1-5/8" window of clear plastic through which you can press the buttons. The case is open on the bottom so you can access the ports, and comes with a 6" wrist strap and a plastic belt/pocket clip. A small strap snaps over the phone antenna to keep it from slipping out. Unfortunately, if your phone doesn't have an external antenna, there is nothing to keep it in except a snug fit, an extraordinarily rigid posture, and a determination to never bend over.
![]() |
35026 CELL PHONE CASE |
By jiminy. A little jumper cord with a modular plug on one end and flat "T" connectors on the other side at the end of dual leads. Wires are insulated, with 3-1/2" of the 7" length covered by a telephone-wire-style gray jacket.
![]() |
36318 7 INCH JUMPER |
Frustrated by a too-short phone cord? Plug your telephone line cord (a single-line RJ11, 2-line RJ14, or 3-line RJ25) into one end of this 1-1/4" x 1/2" x 9/16" in-line coupler from Radio Shack(r). Plug a telephone extension cord into the other end of the modular plastic coupler. Plug the free end of the extension into a wall jack. See how simple? See how convenient? See how you can finally have a real-life dependable phone, as opposed to a cordless handset, where you need it?
![]() |
32903 IN-LINE COUPLER |
A pretty cheap little phone number holder that will work fine at a beginner level. 3" sq x 3/8" thick, it is a white plastic case that opens to one of 12 pages for phone numbers or notes. Slide the index pointer on the edge to select the three letter group of your choice. Lift the lid and the selected page will be displayed. We like it for a stocking stuffer.
![]() |
29957 PHONE NUMBER INDEX |
So the puppy chewed through the phone cord? Our modular cords with connectors on each end let you replace the old one in a snap. They support (1) or (2) lines. The off-white modular base cords connect voice or data devices to a wall jack. At this price, we'd buy extra. Fido, after all, is still teething.
![]() |
31283 BASE CORD, 14 FT | |
![]() |
31282 BASE CORD, 25 FT |
Easy DIY wiring for your phone. This modular plug for a flat base cord is self-piercing. Insert the 4-conductor wire, bend it back, screw the cover on, and you're ready to plug it in. Needs 1" of clearance off the jack.
![]() |
31279 PHONE PLUG |
Don't toss out that obsolete direct-wire phone. It was made back in the old days, when telephones were made to last a lifetime instead of a year and a half. Use it, instead, with your modular wall jack and this 25 ft cream-colored base cord. It has a standard modular connector on one end and spade connectors on the other, and supports (1) or (2) lines. You get a working phone, and a warm feeling for saving the life of that reliable collectible.
![]() |
31280 MOD/DIRECT CORD |
So you're not receiving callers today. Does that mean you're indisposed? Oh, it means the antenna on your cordless phone is broken. What you need is our flexible replacement antenna. Inside its 3/8" ID adaptor is a 3/16" ID sleeve with a set screw. It fits onto the sockets of most telescoping antennas. Cream-colored, 7-1/2" long, comes with instructions.
![]() |
31291 PHONE ANTENNA |
This 7-foot length of standard 4-wire gray telephone cord has a modular plug on each end and an in-line 1-1/2" x 1" dia RF filter at one end. 'Nuff said.
![]() |
34424 RF FILTER |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »