
Attention robotics boffins: Here's a nice, powerful 12-24VDC Mabuchi brush motor with a gearbox and pulley attached. At its nominal 24DC, it spins 12rpm, draws 50mA no load, and stalls a 750mA. Has a 3/4" long x 5/16" flattened shaft with a 4-5/8" dia x 5/16" wide (3/16" ID) single-sheave pulley attached, with a matching O-ring. The gearbox measures 2-3/4" x 3" x 9-1/16". The motor measures 1-1/16"dia x 1-5/8" long and comes with 7" leads and a 2-pin Molex connector.
![]() |
37837 MOTOR W/PULLEY |
Slightly larger than some of our hobby motors, this Mabuchi RS-365SH double-shaft motor is a good choice for science-fair projects. Its range is 6 VDC, 50 mA, 550 rpm to 24 VDC, 80 mA, 2,000 rpm. The 3/32" dia shaft extends 5/8" from the terminal end of the 1-1/2" x 1-1/16" dia motor, and 3/8" from the other end. It has (2) 5" leads.
![]() |
35567 MABUCHI MOTOR |
This reversible DC Johnson motor (Johnson #34513) operates from 12-24VDC with a max efficiency of 24VDC, 3057 rpm, and .14 amps. Measures 1-3/16" dia x 1-3/16" long with (2) hook-up tabs on the back and a 3/32" x 5/16" long slotted shaft. Has (2) mounting holes on the face. Works great as a small generator, output 2.5-3 V. Draws 30mA no load, and spins about 1200 rpm at 12VDC.
![]() |
37855 JOHNSON MOTOR |
Clone motors –– almost. The 24 VDC Hitachi stepper motors (both of which are labeled with Kodak’s part number 315871) are almost identical. Each has 1:5 gearboxes, (3) Hall–effect sensors, and 12 steps per revolution (without the gearbox). The motor cases are 1–3/4” thick x 3–5/8” dia. The 2–1/2” sq x 15/16” thick gearboxes terminate in 1” x 3/8” dia flattened shafts with mounted plastic cams. Each has a set of (7) and a set of (3) leads with Molex–type connectors. The only difference between the takeout motors is that one draws 3 amps, and the other draws 2.4 amps. Sorry, folks, that’s all we know.
![]() |
34589 2.4 AMP STEP MOTOR | |
![]() |
34576 3.0 AMP STEP MOTOR |
Runs well from 3 to 24VDC, draws 25mA at 3VDC, up to 40mA at 24VDC. Stalls at 900mA at 24VDC. The gear motor is approx 2" long x 1-1/2" dia with a flattened shaft 1/4" dia x 3/8" long. Spins at 5 rpm at 3VDC on up to 48 rpm at 24VDC. Has 26" long leads with a Molex® connector.
![]() |
38142 SMALL GEAR MOTOR |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »