
Our diaphragm-type air pump draws 80mA at 3VDC and has a 1/8" OD outlet. It's small and mounted on a small PC board (1-3/8" x 11/16" x 7/16" OA). Yours may or may not have 4" leads. If not, the positive wire goes to the longer of the motor leads. Comes with a self-adhesive strip on the side opposite the PC board. Originally designed to activate an equally small air-pressure switch.
![]() |
38298 SMALL AIR PUMP |
Here are the ins and outs of submersible pumps for your DIY fountain.These small electric pumps run on household current (115 VAC), are rated for continuous duty, have (4) suction–cup feet and an adjustable flow control, and take 1/2" ID tubing. Our indoor/outdoor version is roughly 2" sq x 2-1/4", has a 6–ft grounded power cord, and pumps 70 gal/hr @ 1 ft lift. Plug it in and go with the flow.
![]() |
91348 INDOOR/OUTDOOR PUMP |
Nifty device that takes maxi air and squeezes it down into a mini condition. The device is roughly 6-1/2"" long x 6" tall x 4" wide. It has a 10 ft. cord that plugs into an auto lighter socket: i.e. it runs on 12VDC @ 10 amps. Air output is via a 12" hose with a variety of valve adapters for tires, soccer balls, rubber rafts, and just dusting off the environment. Complete with a 0-250 psi gauge. Which should be plenty of pressure to explode a weak bike tire or flimsy beach ball, so please be careful!
![]() |
23271 AIR COMPRESSOR, 12 VDC |
Couldn't be simpler. A small 6VDC submersible water pump lifts liquid approx 18" and runs off the 10-1/2" x 6-1/4" x 3/4" thick solar panel that's included. No storage battery, so…no sun, no fontana. But do you really care that your little fountain doesn't work in the rain? You're going to be inside anyway. The pump measures 2-5/8" long x 1-3/8" wide x 1-5/8" tall without the 7/8" x 1/4" ID output tube, and has rubber suction-cup feet. The solar panel has a 38" cord to mate with the pump, and a pair of sliding, 1/4" mounting nuts.
![]() |
93065 SOLAR FOUNTAIN |
Convert large water jugs into dispensers. This manual bellows-type water pump has an 18" (in two 9" pieces) x 7/16" ID inlet tube, a 5-1/2" long bent spigot, and comes with a small bottle brush for cleaning. The bottom of the pump fits many water jugs, with a split-flange coupling that's approx 2-3/8 ID and tightens down for a near-airtight fit. The unit is 4-3/4" dia x 9-1/2" tall OA in gray and blue plastic.
![]() |
38173 BELLOWS PUMP |
the road in front of you? Mayhaps you need this universal replacement water pump kit for your dead windshield washers, Bubbeleh. Comes with a 12VDC 1A pump, 26" of 3/16" ID tubing, a 2-foot jumper for power, mounting hardware, and complete instructions. Standing alone, it has about a 6" lift and will push approx 3/4 GPM. Best for intermittent duty.
![]() |
38300 WASHER PUMP |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »