Express Shop!
Search Our Stuff
View Cart (0)
Sign In/Up! (It's Worth It!)
Home
/ Motors, Blowers and Pumps
Science Fare
A handful of hobby motors for a very reasonable price. This Mabuchi #RE-14 motor is only 1-1/8" x 13/16" dia, plus a 5/16" x 1/16" dia shaft. It operates from 1-1/2 to 3 VDC. Under load, at 1-1/2 VDC it draws 140 mA and spins at 500 rpm, and at 3 VDC, 800 mA, spins at 800 rpm. Comes with (2) 3" leads terminating in ring connectors. If you're looking for a larger quantity, try our classroom pack of (50). It’s a bargain!
 |
34566P4 MOTOR, 1.5 TO 3VDC | |
|
34566P50 MOTOR, CLASSROOM PACK |
Tiny Vibes
From our smallest mini-motor ever. This miniscule motorette is the (unused) vibrator from a pager, and it comes in at a teensy 1/2" long x 3/16" square, including the 1/8" long cam shaft that makes it vibrate in the first place. Has a little rubber jacket and (2) leads. Speed? Something like 1.5K rpm at the bottom end. Add a vibrating function to the device of your choice, double the rattle in something, or create your very own vibrating robotic cockroach.
 |
38575 PAGER MOTOR |
Little Giant
Call it the Stephen A. Douglas of gear motors-small, but more than able to go up against the big guys. From Pittman Mfg (part # GM8224), this permanent magnet, reversible, 328 RPM, 24VDC motor runs anywhere from 6-24VDC with exceptional torque throughout the range. No load current draw of 180mA. Stalls at 5.54A. Torque rating of 3.09 oz-in. Overall size is 3-3/8" long x 1-3/8" dia with a 3/16" dia x 11/16" flattened, hardened shaft. Leads are 5" long terminating in a 2-prong plug. Pittman says "self-aligning, sintered bronze bearings and diamond-turned commutators."
|
37972 PITMAN GEAR MOTOR |
Tough Gear Motor
Small but durable. Measures 1-1/2" long (including the terminals) x 1-1/16" dia, with a removable, 1-1/4" dia x 1-1/8" long gearbox and 3/16" x 3/8" long flattened offset shaft. Runs between 6-12 VDC. At 12 VDC, it spins 7 rpm and draws 90mA. Gearbox ratio is approx 400:1. Has (3) 3/32" mounting holes on the shaft face. Reversible.
|
37739 12VDC GEAR MOTOR |
Can You See Your Way Clear To…
the road in front of you? Mayhaps you need this universal replacement water pump kit for your dead windshield washers, Bubbeleh. Comes with a 12VDC 1A pump, 26" of 3/16" ID tubing, a 2-foot jumper for power, mounting hardware, and complete instructions. Standing alone, it has about a 6" lift and will push approx 3/4 GPM. Best for intermittent duty.
|
38300 WASHER PUMP |
Gear Motor
Attention robotics boffins: Here's a nice, powerful 12-24VDC Mabuchi brush motor with a gearbox and pulley attached. At its nominal 24DC, it spins 12rpm, draws 50mA no load, and stalls a 750mA. Has a 3/4" long x 5/16" flattened shaft with a 4-5/8" dia x 5/16" wide (3/16" ID) single-sheave pulley attached, with a matching O-ring. The gearbox measures 2-3/4" x 3" x 9-1/16". The motor measures 1-1/16"dia x 1-5/8" long and comes with 7" leads and a 2-pin Molex connector.
|
37837 MOTOR W/PULLEY |
Popular Tags:
Blithe
stuff4chuck
|
Add Tag 
Fresh Muffins
Tasty little Arctic muffin fan from Kest, and brand spankin' new. Measures 4-5/8" sq x 1-1/2 thick, draws 310mA at 120VAC, spins 3100 RPM and pushes 112 CFM with a 7-blade impeller and twin power terminals in the top. UL/CSA.
|
92940 ARCTIC KEST-471BT |
Submersible Pumps
Here are the ins and outs of submersible pumps for your DIY fountain.These small electric pumps run on household current (115 VAC), are rated for continuous duty, have (4) suction–cup feet and an adjustable flow control, and take 1/2" ID tubing. Our indoor/outdoor version is roughly 2" sq x 2-1/4", has a 6–ft grounded power cord, and pumps 70 gal/hr @ 1 ft lift. Plug it in and go with the flow.
|
91348 INDOOR/OUTDOOR PUMP |
Mini Air Compressor
Nifty device that takes maxi air and squeezes it down into a mini condition. The device is roughly 6-1/2"" long x 6" tall x 4" wide. It has a 10 ft. cord that plugs into an auto lighter socket: i.e. it runs on 12VDC @ 10 amps. Air output is via a 12" hose with a variety of valve adapters for tires, soccer balls, rubber rafts, and just dusting off the environment. Complete with a 0-250 psi gauge. Which should be plenty of pressure to explode a weak bike tire or flimsy beach ball, so please be careful!
|
23271 AIR COMPRESSOR, 12 VDC |
It's All About Timing
Our synchronous 115VAC timing motor spins CCW at 30 rpm and draws approx 25mA. Measures 2-3/8" long x 1-3/4" wide in a teardrop shape, with a 3/4" long x 3/16" dia shaft at the top of the drop. Has 6" leads and is made in the USA by Cramer Controls. UL.
|
38013 TIMING MOTOR |
Popular Tags:
DLMGottaGet
|
Add Tag
Muffin Bonanza
Our special Little-Fans-R-Us offering. All these muffin fans are square and all have mounting holes at the corners. "Com" = Comair-Rotron. "Mech" = Mechatronics, Inc., Aav is Aavid Thermalloy. All are UL. For more information including manufacturer part number and quantity discounts, please contact customer service.
| VOLTS | SIZE | ||||
|---|---|---|---|---|---|
|
38117 MUFFIN FAN | 12 VDC | 1-1/2" x 1/4" | Details | |
|
38118 MUFFIN FAN | 12 VDC | 1-3/4" x 3/8" | Details | |
|
38119 MUFFIN FAN | 12 VDC | 3-1/8" x 15/16" | Details | |
|
38120 MUFFIN FAN | 12 VDC | 3-1/8" x 15/16" | Details | |
|
38121 MUFFIN FAN | 12 VDC | 3-1/8" x 15/16" | Details | |
|
38122 MUFFIN FAN | 12 VDC | 3-5/8" x 15/16" | Details | |
|
38123 MUFFIN FAN | 12 VDC | 3-5/8" x 1-1/4" | Details | |
|
38619 MUFFIN FAN | 12 VDC | 3-1/8" x 1" | Details |
Shop by Popular Tags
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »
