
This cutie from Mabuchi is a 12VDC reversible motor that spins at approx 2400 rpm, draws about 17mA no load, and stalls at 240mA. Measures 1-1/2" long x 1-1/16" dia with a removable sleeve. The 3/32" dia x 5/16" long shaft has a removable 5/16" dia single-sheave pulley. Has 9" leads with a 2-pin Molex connector.
![]() |
40952 12VDC MABUCHI MOTOR & SHEAVE PULLEY |
Our motor dude calls this DC reversible gear motor "very interesting." Rated for 3-24VDC with speed ranging from 75 to 654 rpm. The current draw is very low, 2.4mA no load and the highest readable stall current is 90mA. The motor itself is 1-11/16" long x 11/16" dia with a 7/16" long x 3/32" dia shaft with a 9mm (approx 3/8") single sheave, 2mm ID pulley on it. Motor is connected to a monodirectional drive assembly with some mystery circuitry glued to it. Feel free to discard this. Motor is German, gearhead and drive train are Swiss.
![]() |
40817 DC GEAR MOTOR ASSEMBLY |
These brand-spanking new 12VDC motors are made to move automobile seats but are willing to change. They spin at approx 190 rpm, draw 1.5A no load, and stall at approx 25A. Threaded shaft is at a right angle and is 4-1/8" x 7/16". Shaft thread is non-standard, so treat it as a smooth shaft and mount pulley or gear with a setscrew. Measures 5-5/8" x 2-1/2" x 2-1/2" overall, not counting the shaft, and has power terminals opposite the gearbox with (2) 1/4" mounting holes opposite the shaft.
![]() |
40588 CAR SEAT MOTOR |
You pays your money and you takes yer choice of air pumps, depending on your access to power. The battery operated pump takes (4) "D-Cell" batteries that you supply and blows up air beds and other inflatables. Puffs like a hair dryer on low. Measures 3-7/8" tall x 4-1/8" x 3-1/2". The plug-in pump is a 120VAC 150W version that measures 4-1/8" tall x 4-7/8" x 3-1/2" with a 10-foot power cord. It blows gustily, like a hair dryer set on high and will both inflate and deflate high volume-low pressure boats, mattresses and toys. Both have 1-1/4" OD inlets and outlets and come with (3) different nozzles. Originally manufactured for Stansport™.
![]() |
94142 120VAC AIR PUMP WITH (3) NOZZLES | |
![]() |
94141 BATTERY-OPERATED AIR PUMP WITH (3) NOZZLES |
Small but durable. Measures 2-7/16" long x 1-5/16" dia. and has a 3/16" x 3/8" long flattened offset shaft. Runs between 6-12 VDC. At 12 VDC, it spins 7 rpm and draws 90mA with a 500mA stall current. Gearbox ratio is approx 400:1. Has (3) 3/32" mounting holes on the shaft face. Reversible.
![]() |
37739 12VDC GEAR MOTOR |
This nominal 12VDC gear motor measures 1-1/16" dia (1-5/16" at the gearbox) x 2-1/16" long with a 3/8" long x 3/16" dia flattened shaft. Spins at 135 rpm and draws 35mA no load, stalls at 1A. Has a 2-pin, 6mm Molex connector at the power leads.
![]() |
40663 12VDC ROUND MOTOR |
The Stephen Douglas of motors, our little giant, only 1" long x 15/32" x just over 3/8", spins at approx 45rpm. Size includes the all-metal gearbox (but not the 3/8" long x 1/8" dia flattened shaft). The 6VDC motor with a 298:1ratio draws approx 5mA and stalls at 50mA.
![]() |
93997 MICRO-MOTOR |
New linear actuator from Von Weise®, made for sliding camper sections, has a motor approx 6-1/2" x 3" x 6-1/2" overall. Draws 11A at 12VDC under load, 1.25A no load, and spins approx 150 rpm. Has 4" leads with a 2-pin connection. Output is through a 3/4" dia threaded rod inside a 1-3/8" dia steel pipe. You pick from the the medium version; a 35-1/2" pipe (38" long over all); or the long, a 41" pipe (44" long over all). All have approx 30" stroke.
![]() |
39936 12VDC LINEAR ACTUATOR Note: This item is not eligible for Expedited Shipping or delivery to Alaska, Hawaii, or the Territories. |
|
![]() |
39934 LONG ACTUATOR Note: This item is not eligible for Expedited Shipping or delivery to Alaska, Hawaii, or the Territories. |
This diminutive 6VDC Mabuchi motor draws 100 mA, approx 500mA at stall, and spins at approx 1240 rpm. The striated shaft is 1/2" long x 3/32" dia, in a housing that measures 1-3/16" x 1" dia. You get three for one great price for your science fair project, moving display, or latest invention.
![]() |
38143 6 VDC MABUCHI MOTOR |
This 12VDC gear motor is a new reversible double-shafted automotive seat motor that was never installed in the auto. Draws 1.3A no load, stalls at approx 9.5A and spins 2,500 rpms. Output is through 1/8" sq x 5/8" deep ports at the front and back of the housing (we'll include (2) short, square shafts to get you started). Housing measures 4-5/8" long x 1-29/32" dia with (2) shrouded power terminals at one end and (2) 3/16" dia spurs at the other. Overall, it's 5" x 2-3/4" across.
![]() |
40589 12 VDC 2500 RPM AUTOMOTIVE SEAT MOTOR |
Cranks out 300-400 inch-pounds of torque, in fact. It's a 12VDC 3.5A (no load) 24 rpm gear motor made to roll out camper units. Includes a brake lever in a rubber boot. The unit measures 9-3/8" x 4-7/8" x 9" overall, with a 2-1/2" dia motor and a main output shaft 3/4" dia x 3/4" long with 1/4" bores opposite each other approx halfway down the shaft. A quartet of 3/16"-14 thread mounting holes surround the shaft, 15" leads. We're thinking home-made winch, small boat-trailer, BBQ crank, monster robotics or kinetic sculpture apps. Weighs 11 lbs.
![]() |
39923 HI-TORQUE MOTOR Note: This item is not eligible for Expedited Shipping or delivery to Alaska, Hawaii, or the Territories. |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »