Express Shop!
Search Our Stuff
View Cart (0)
Sign In/Up! (It's Worth It!)
Home
/ Motors, Blowers and Pumps
Image Viewing Preferences
You now have the option to view our web site with dazzling color photos or with our traditional hand-drawn line art. It’s a big decision, but don’t worry; you can always change your mind later. Choose your path below. Thanks! If you have a sciplus.com web account we can remember your changes. Sign in to your account or create an account.
Huff-n-Puffer
Cool something off with this flat Nidec squirrel-cage fan, rated at 24VDC 600mA. Measures 4-5/8" square x 1-1/4" thick in a black plastic housing. Intake through a 2-7/8" port on the side, outlet via 2-1/4" x 1-1/8" ID port on the top. Ball-bearing blower can be powered with 20.4 - 27.6 volts at 28CFM. Has (3) mounting holes and comes with 12" leads, including a tach lead. Nidec model # A34886-58PW.
 |
38615 NIDEC® FAN |
Tough Guy Motor
This sturdy little gear motor is nominally rated for 19.1VDC, but at 12VDC it will be a 250mA no-load draw and stall at 1A. Spins 50 rpm, through a 5/8" long x 3/16" dia shaft with a 30-tooth, approx 21/32" x 7/32" (17mm x 5.5mm) gear. Has a 1-3/4" x 1-3/8" mounting plate with a corner knocked off. Motor measures 3" long x 1-3/8" dia at the widest, with 4" leads. Made in the USA by Pittman®.
|
40474 TUBULAR GEAR MOTOR |
Copy That
This très agréable 120VAC gear motor from Crouzet was made in France to be a replacement part (# 600 S 92834) for zose copiers zat rhyme with Zeerocks. Spins at 60rpm and draws 850mA no load, stalls at 1A. Flattened shaft is 3" long x 5/16" dia. Measures 4-1/2" x 3-1/8" x 2-5/8" overall. Marked with a 1-on/4.5-off duty cycle, but we ran it for several minutes with no ill-effects, so we're calling it "intermittent duty." Has 12" leads with a 3-pin Molex connector and comes with (3) 3/16"-32 mounting bolts and washers. CSA listed.
|
40291 COPIER MOTOR |
Science Project Motor & Gearbox
Great for roboticists, too. It's a mighty-mite, this little 6VDC 45 RPM motor with a right-angle gearbox. Draws 13mA, no load, and stalls at 120mA. Output is through (2) double-flattened 1/4" dia x 3/16" long shafts on opposite sides of the white plastic housing, both with 1/16" dia center holes. Measures 1-7/8" x 7/8" overall. Gear ratio is 228:1.
|
94000 45 RPM GEAR MOTOR |
WATER PUMP
What we have here is a like-new vibration type water pump. Operates at 120VAC 24 watts and pumps approx a gallon per minute. Outlets are both 1/4" OD. Overall, the pump is approx 6-1/2" long with attachments x 2" square. Prodoto in Italia.
|
40782 ITALIAN WATER PUMP |
Step Right Up
Our 48-step reversible (unipolar) stepper motor draws approx 60mA per coil at 12VDC. Coil leads are yellow/orange and brown/black, dark-green leads are commons. Output is through a 5/16" dia x 1/8" plastic 12-tooth gear. Motor measures 13/16" thick x 1" dia on a 1-11/16" x 1" rounded diamond-shaped plate.
|
40789 48-STEP MOTOR |
12 VDC Linear Actuator
This motor on this 12-volt linear actuator is 6" x 3" x 6" overall. Output is through both a 2-draw mast that measures 2" dia at bottom, with a flattened 3/4"-10 threaded rod that extends 5-1/2" past the top draw and a keyed 1-1/4" long x 5/8" hex shaft below the gearbox (approx 400 rpm). Draws 4.5A at 12VDC no load, stalls at 30A. Retracted length is 35", extended length is 66" counting the rod and hex shaft. Stroke approx 30".
|
39958 12 VDC LINEAR ACTUATOR Note: This item is not eligible for Expedited Shipping or delivery to Alaska, Hawaii, or the Territories. |
$109.50
EACH
Out of Stock. Check Back Soon! |
B-17 & B-24 Motors
These small, new motors for oil-heater louvered doors were made for, but never installed in, WWII-era B-17s and B-24s. High torque, low rpm, these collectible 24VDC 1.5A motors measure 5-1/8" long x 3-1/2" dia on the shaft side and 2-3/8" dia on the other end, in a blunted bullet shape. The 15-tooth output shaft is 3/4" long x 1/2" dia, centered on the large end with a trim screw offset for some speed control, and a 4-pin Amphenol connector. Rated at 24VDC but will operate between 12-26VDC. These are of particular interest to us because the sample, at least, was manufactured right down the road from us in Rockford, Illinois, by the Barber-Colman Company!
|
39972 WW II B17/B24 AIRCRAFT CONTROLLER MOTOR |
Popular Tags:
ctw
Homeschool
Fun
|
Add Tag 
Big Arctic Muffin
From Kest. Measures 6-3/4" wide x 5-7/8" tall x 2" thick, spins at 3100 RPM, draws 730mA at 120VAC, pushes 240 CFM with a 7-blade impeller and has (2) 12" leads. UL/CSA.
|
92941 ARCTIC KEST 481BW |
Fresh Muffins
Tasty little Arctic muffin fan from Kest, and brand spankin' new. Measures 4-5/8" sq x 1-1/2 thick, draws 310mA at 120VAC, spins 3100 RPM and pushes 112 CFM with a 7-blade impeller. Twin 8" long leads with no plug. UL/CSA.
|
92940 ARCTIC KEST-471BT |
Popular Tags:
32
zappenfusen
bathroom
|
Add Tag
Muffin Bonanza
Our special Little-Fans-R-Us offering. All these muffin fans are square and all have mounting holes at the corners. "Com" = Comair-Rotron. "Mech" = Mechatronics, Inc., Aav is Aavid Thermalloy. All are UL. For more information including manufacturer part number and quantity discounts, please contact customer service.
| VOLTS | SIZE | ||||
|---|---|---|---|---|---|
|
39126 MUFFIN FAN | 12 VDC | 2-3/4" x 1" | Details | |
|
40605 MUFFIN FAN | 12 VDC | 3-5/8" x 1" | Details | |
|
40606 MUFFIN FAN | 12 VDC | 3-1/8" x 1-1/2" | Details | |
|
40607 MUFFIN FAN | 12 VDC | 50mm x 10mm | Details | |
|
40608 MUFFIN FAN | 12 VDC | 2-3/8" x 13/16" | Details |
Shop by Popular Tags
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »
