Express Shop!
Search Our Stuff
View Cart (0)
Sign In/Up! (It's Worth It!)
Home
/ Motors, Blowers and Pumps
Whirrrrrrrrrrrrrrr
This 1/50 HP, 115VAC motor draws 800mA and spins CCW at 3000 rpm. (We're thinking exhaust fan.) The black steel housing measures 3-3/4" x 3-1/4" dia with a 7/16" long threaded shaft (5/32"-32). It has a 26" power cord, and a pair of 2-9/16" long threaded mounting bolts on the face. Made in the USA.
 |
38863 HIGH RPM MOTOR |
Mini Moto
Manny Moto's kid brother? Not at this price. This little hobby motor runs on 1-1/2 to 3VDC and draws approx 400mA while spinning between 700 and 1400 rpm. Hobby size, too: 1-1/8" x 3/4" with a 5/16" long shaft. Dandy for solar-power experiments, our motor maven says.
|
39403P4 MINI MOTOR | |
|
39403P50 MINI MOTOR, CLASSROOM PACK |
Molon Motor, Free Fan
This 230VAC Molon gear motor spins 45 rpm, draws 340mA, no load, and stalls 450mA. Turns CCW with 7in/lb of torque. The motor side of the shaft is 3/16" dia x 3/4" long with a plastic 4-blade fan. The gearbox output is a 1/4" dia x 5/8" long flattened shaft with a cotter pin hole. Unit is 4-1/2" x 2-3/4" x 4-1/2" OA. Thermally protected, and made in the USA.
|
38138 MOLON MOTOR |
Nice Squirrel
A Nice squirrel cage blower. Datech blowers have thermister-based control circuits that run the fan faster as the unit heats up, clever things. The P1091 is rated at 12VDC 2.3A and is mounted on a 3-7/16" heat sink with fins and (2) condenser coils. Designed to be mounted on your main computer chip for cooling. The blower outlet is 3-9/16" x 1" and the housing measures 5-3/8" x 3-5/8" x 1-1/4". Maximum output is approx 27CFM.
|
36584 DATECH P1091 FAN |
Timing Motors
These are really geared reduction motors, but much smaller and of lower power. Often used to operate cams and switches in electrical circuits, or to drive displays, they can generally be operated in continuous applications if not heavily loaded. Most are about 2" dia. x 1-1/2" thick. Remember CW means “Clockwise” and CCW “Counter–clockwise,” looking at the shaft.
| RPM | ROTATE | ||||
|---|---|---|---|---|---|
|
33915 230VAC TIMING MOTOR, 2 RPM | 2 | CCW | Details | |
|
30736 9VAC TIMING MOTOR, 2/3 RPM | 2/3 | CW | Details |
Popular Tags:
30736
geekly
alteredbit
|
Add Tag 
We Have So Many Fans
And even more fan blades. Choose a white-plastic 5-blade or a black-plastic 4-blade, each approx 4" across with a 3/16" bore. Designed for clockwise rotation. No motor. Just blades. (But nice little blades.)
|
36416 BLACK FAN BLADE | |
|
36415 WHITE FAN BLADE |
Popular Tags:
wishmbg
alteredbit
|
Add Tag
Takeout Hitachis
Clone motors –– almost. The 24 VDC Hitachi stepper motors (both of which are labeled with Kodak’s part number 315871) are almost identical. Each has 1:5 gearboxes, (3) Hall–effect sensors, and 12 steps per revolution (without the gearbox). The motor cases are 1–3/4” thick x 3–5/8” dia. The 2–1/2” sq x 15/16” thick gearboxes terminate in 1” x 3/8” dia flattened shafts with mounted plastic cams. Each has a set of (7) and a set of (3) leads with Molex–type connectors. The only difference between the takeout motors is that one draws 3 amps, and the other draws 2.4 amps. Sorry, folks, that’s all we know.
|
34589 2.4 AMP STEP MOTOR | |
|
34576 3.0 AMP STEP MOTOR |
Blade, No Fan
So build your own (see "Motors"). Our white-plastic 4-blade fan (blade only) is 6" dia OA, with a 2" dia x 7/8" thick hub with a 3/16" bore. Made for a clockwise rotation. Not pristine, but not used, either. Made in the USA.
|
37433 FAN BLADE |
Cool
This heat-dispersing device that used to live in a computer has a removable 12VDC 450mA Nidec muffin fan-2-3/4 square x 9/16" with power and tach leads and four mounting screws at the corners. This is attached to a 3-1/4" x 2-3/4" x 1-5/8" aluminum box and grill, open on three sides, and a copper heat sink that's 3-1/4" x 2-3/4" x approx 1/4" thick. The whole shebang is held in a plastic bracket with a swing-out handle, ready to disperse some heat.
|
36157 MUFFIN FAN PLUS |
Deceiving
Nice black plastic fan blade; looks much more menacing than it is. 1-5/8" dia x 3/4" thick. 8 blades, each 1/4" wide, in a twisting pattern. Takes a 1/16" shaft; (2) 1/4" dia holes on either side of the shaft hole. Gives a squirrel type effect, unless you put it in a housing. We'd also like to see this as a deep-mud tire for a model vehicle.
|
27814 FAN BLADE, 8-BLADE |
Huff-n-Puffer
Cool something off with this flat Nidec squirrel-cage fan, rated at 24VDC 600mA. Measures 4-5/8" square x 1-1/4" thick in a black plastic housing. Intake through a 2-7/8" port on the side, outlet via 2-1/4" x 1-1/8" ID port on the top. Ball-bearing blower can be powered with 20.4 - 27.6 volts at 28CFM. Has (3) mounting holes and comes with 12" leads, including a tach lead. Nidec model # A34886-58PW.
|
38615 NIDEC® FAN |
Shop by Popular Tags
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »
