Express Shop!
Search Our Stuff
View Cart (0)
Sign In/Up! (It's Worth It!)
Home
/ Motors, Blowers and Pumps
Image Viewing Preferences
You now have the option to view our web site with dazzling color photos or with our traditional hand-drawn line art. It’s a big decision, but don’t worry; you can always change your mind later. Choose your path below. Thanks! If you have a sciplus.com web account we can remember your changes. Sign in to your account or create an account.
Whiiiiiiiiiiirrrrrrr
Big time spinner in a little package. This 1-1/16" long x 5/8" x 15/32" motor from Mabuchi spins at approx 6600 rpm. The 5-11.5 VDC motor, nominally rated for 8VDC 100mA, it has an 8-tooth, 3/16" dia x 1/8" plastic gear and 5" leads with a quick-disconnect terminal. Stall current is 450mA. Think of all the fun ways to use this in a science fair!
 |
40790 6600 RPM MINI MOTOR |
Step Right Up
Our 48-step reversible (unipolar) stepper motor draws approx 60mA per coil at 12VDC. Coil leads are yellow/orange and brown/black, dark-green leads are commons. Output is through a 5/16" dia x 1/8" plastic 12-tooth gear. Motor measures 13/16" thick x 1" dia on a 1-11/16" x 1" rounded diamond-shaped plate.
|
40789 48-STEP MOTOR |
Copy That
This très agréable 120VAC gear motor from Crouzet was made in France to be a replacement part (# 600 S 92834) for zose copiers zat rhyme with Zeerocks. Spins at 60rpm and draws 850mA no load, stalls at 1A. Flattened shaft is 3" long x 5/16" dia. Measures 4-1/2" x 3-1/8" x 2-5/8" overall. Marked with a 1-on/4.5-off duty cycle, but we ran it for several minutes with no ill-effects, so we're calling it "intermittent duty." Has 12" leads with a 3-pin Molex connector and comes with (3) 3/16"-32 mounting bolts and washers. CSA listed. Clockwise rotation.
|
40291 COPIER MOTOR |
Popular Tags:
ctw
gearmotor_60rpm
|
Add Tag 
Submersible Pumps
Here are the ins and outs of submersible pumps for your DIY fountain.These small electric pumps run on 24 VAC (For low energy consumption.) from the included wall outlet adapter, are rated for continuous duty, have (3) suction-cup feet, an adjustable flow control and both a straight and 90° 5/16" tubing adapter. This little pump is roughly 2-5/8" x 1.5" x 2-1/4", has a 6-ft power cord with an in-line switch, and pumps 70 gal/hr @ 1 ft lift. Plug it in and go with the flow. Indoor use only.
|
91348 INDOOR PUMP |
80 RPMs
This 120VAC 80 RPM intermittent use gear motor draws 1A and stalls at 2A. There are multiple stand-offs on the gearbox and the whole shebang measures 4-1/2" x 3-1/4" x 2-3/8" with a 1-3/8" thick stack. Gearbox has a 3/8" dia x 3/4" long flattened shaft. Has (1) 5-1/2" lead and (1) quick-disconnect terminal.
|
40282 80 RPM GEAR MOTOR |
Mini Air Compressor
Nifty device that takes maxi air and squeezes it down into a mini condition. The device is roughly 6-1/2"" long x 6" tall x 4" wide. It has a 10 ft. cord that plugs into an auto lighter socket: i.e. it runs on 12VDC @ 10 amps. Air output is via a 12" hose with a variety of valve adapters for tires, soccer balls, rubber rafts, and just dusting off the environment. Complete with a 0-250 psi gauge. Which should be plenty of pressure to explode a weak bike tire or flimsy beach ball, so please be careful!
|
23271 AIR COMPRESSOR, 12 VDC |
Popular Tags:
bblike
compressor
protection
|
Add Tag
The 36 Steps
This new 12VDC 1A stepper motor with 36 steps per revolution was for a printer, maybe. Or a scanner, maybe. Whichever, it's mounted on a 2-1/2" x 2" plate with a 3/4" long shaft with a 5/8" dia rubber wheel out one side and a 15-tooth, 2" dia plastic sprocket on the side with the leads. The (5) blue leads opposite the white go to 2.8 Ohm coils. Sorry, no wiring diagram available. Samsung P/N 02914900.
|
40788 36-STEP MOTOR |
Timing Motors
These are really geared reduction motors, but much smaller and of lower power. Often used to operate cams and switches in electrical circuits, or to drive displays, they can generally be operated in continuous applications if not heavily loaded. Most are about 2" dia. x 1-1/2" thick. Remember CW means “Clockwise” and CCW “Counter–clockwise,” looking at the shaft.
| RPM | ROTATE | ||||
|---|---|---|---|---|---|
|
33915 230VAC TIMING MOTOR, 2 RPM | 2 | CCW | Details | |
|
30736 9VAC TIMING MOTOR, 2/3 RPM | 2/3 | CW | Details |
Two Shafts, No Waiting
This double-shafted 120VAC motor spins approx 900 rpm and draws .5 amps. The 3/16" dia shaft extends 1-3/4" on one side and 4" on the other. On the 4" side are (2) 1-3/8" long x 1/8"-32 mounting bolts. Has an 11/16" stack, (2) 10" leads, and measures 3" x 2-3/8" x 1-7/8" without the shaft and bolts. UL/CSA. Made in the USA.
|
40164 TWO-SHAFTED MOTOR |
Really Wheely
Just imagine what you could do with this nifty pair of 3-volt motors (our each is a set of 2). The motors, each of which draws 700 mA and spins at 1,000 rpm, are in white-plastic housings 2-1/2" thick x 2-7/8" dia OA, and are connected by a 15" wire harness with a battery contact and a high/low/off switch. Peeking out from each housing and driven by each motor is a soft, black-rubber wheel 3/8" wide x 3/4" thick x 2-1/2" dia. Think toy race track, and spin out from there!
|
35298 3V MOTORS, PAIR |
Popular Tags:
BigUglyMich
cool
stuff1
|
Add Tag
Takeout Hitachis
The 24 VDC Hitachi stepper motor is labeled with Kodak’s part number 315871. Each has 1:5 gearboxes, (3) Hall–effect sensors, and 12 steps per revolution (without the gearbox). The motor cases are 1–3/4” thick x 3–5/8” dia. The 2–1/2” sq x 15/16” thick gearboxes terminate in 1” x 3/8” dia flattened shafts with mounted plastic cams. Each has a set of (7) and a set of (3) leads with Molex–type connectors. The motor draws 2.4 amps. Sorry, folks, that’s all we know.
|
34589 2.4 AMP STEP MOTOR |
Shop by Popular Tags
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »
