Express Shop!
Search Our Stuff
View Cart (0)
Sign In/Up! (It's Worth It!)
Home
/ Motors, Blowers and Pumps
Honey Of A Swiss Motor
The motorheads out back are loving this reversible, Swiss-made brushed DC motor, rated at 6VDC, 4200rpm at 84mA. Load current is 2.6A. Measures 1-3/4" long x 1" dia with a 7/16" long x 3mm (.118") dia flattened shaft, and has 1-1/4" leads, Alnico magnets, and precious-metal brushes. Great torque for a motor that isn't geared.
 |
37874 SWISS MOTOR |
Molon Motor
This double shafted reversible DC motor from Molon takes 12-24VDC and spins approx 5-10K rpms. At 12VDC it draws 190mA no load, at 24VDC it draws 250mA no load with a stall current of 3.8 amps. Measures 1-15/16" long x 1-3/8" dia. The 1/8" dia shaft is 7/16" long out the front, 9/16" long out the back. Made in the USA.
|
37854 DC MOTOR |
Nice Squirrel
A Nice squirrel cage blower. Datech blowers have thermister-based control circuits that run the fan faster as the unit heats up, clever things. The P1091 is rated at 12VDC 2.3A and is mounted on a 3-7/16" heat sink with fins and (2) condenser coils. Designed to be mounted on your main computer chip for cooling. The blower outlet is 3-9/16" x 1" and the housing measures 5-3/8" x 3-5/8" x 1-1/4". Maximum output is approx 27CFM.
|
36584 DATECH P1091 FAN |
Ceiling Fan Guts
Brand new ceiling fan motor, in a black or white steel casing. Just add the ceiling fan. The black one is 120VAC and draws 2.5A at the start, runs at 1.5A, approx 1100 rpm. The case measures 5" dia x 1-3/4" with (2) 1/8" mounting holes; the flattened shaft is 1-1/16" long x 3/8" dia. Comes with 18" leads. The white motor is 3-speed, 120VAC in the same size, 5" dia x 1-3/4" with a 1-1/16" x 3/8" flattened shaft, (2) 1/8" mounting holes and 18" leads (white lead is common, black is full speed, blue is medium, red is low.) Maximum speed is approx 1150 rpm.
|
36616 BLACK MOTOR FAN | |
|
36617 WHITE MOTOR FAN |
Deceiving
Nice black plastic fan blade; looks much more menacing than it is. 1-5/8" dia x 3/4" thick. 8 blades, each 1/4" wide, in a twisting pattern. Takes a 1/16" shaft; (2) 1/4" dia holes on either side of the shaft hole. Gives a squirrel type effect, unless you put it in a housing. We'd also like to see this as a deep-mud tire for a model vehicle.
|
27814 FAN BLADE, 8-BLADE |
Takeout Fan Blade
If not a take-out fan blade, a very dangerous Frisbee®. With (4) squarish aluminum blades and a steel collet, it's a touch beat up but has a nice, old-timey look to it. 10" span, collet measures 1" dia x 3/4" long with a 5/16" ID and hex setscrew. CW rotation.
 |
11333 FAN BLADE |
Induction Motors
The bigger guy is a 1/12 HP AC induction motor from Oriental Motor (their part no. 51K60A-SW) that requires 200 to 230VAC of three-phase power at approx 1/2A. Spins at 1600 rpm; rated at 3.3 lb/in of torque. Measures 4-13/16" long x 3-1/2" square with a flattened 7/16" dia x 1-3/8" long shaft and a 3-1/2" square mounting plate with (4) 1/4" mounting holes. The shaft has a 2mm bore in the center. Yours may or may not have a 3-1/4" capstan mounted on the shaft. The smaller one is a 1/30 HP from the same manufacturer (their part no. 41K25A-SW). Requires 200 to 230VAC of three-phase power at approx 1/4A. Spins 1300 to 1600 rpm; rated at 1.38 lb/in of torque. Measures 3-3/8" long x 3-1/8" square with a flattened 5/16" dia x 1-3/16" long shaft and a 3-1/8" square mounting plate with (4) 1/4" mounting holes. The shaft has a 2mm bore in the center. Both motors UL/CSA.
|
37197 INDUCTION MOTOR, LG. | |
|
37198 INDUCTION MOTOR, SM. |
Cool
This heat-dispersing device that used to live in a computer has a removable 12VDC 450mA Nidec muffin fan-2-3/4 square x 9/16" with power and tach leads and four mounting screws at the corners. This is attached to a 3-1/4" x 2-3/4" x 1-5/8" aluminum box and grill, open on three sides, and a copper heat sink that's 3-1/4" x 2-3/4" x approx 1/4" thick. The whole shebang is held in a plastic bracket with a swing-out handle, ready to disperse some heat.
|
36157 MUFFIN FAN PLUS |
Flat-Out Power
Great for a tight space, this flat 12 VDC motor is 5-1/2" dia x only 2-1/8" thick, made to fit into the engine compartment of a small car. The 9/16" long x 5/16" dia shaft has a pressure-fit pin and a groove for a retaining ring. With no load, it's 1800 rpm and 550 mA at 6 volts, and 4000 rpm and 750 mA at 12 volts. Pushed to 24 volts, it hits 6300 rpm. It's reversible, has (7) 3/16" mounting holes, and a double 9" lead ending in a 2-pin connector. Brand new, very good torque, and a real beauty.
|
33450 PANCAKE MOTOR |
Huff-n-Puffer
Cool something off with this flat Nidec squirrel-cage fan, rated at 24VDC 600mA. Measures 4-5/8" square x 1-1/4" thick in a black plastic housing. Intake through a 2-7/8" port on the side, outlet via 2-1/4" x 1-1/8" ID port on the top. Ball-bearing blower can be powered with 20.4 - 27.6 volts at 28CFM. Has (3) mounting holes and comes with 12" leads, including a tach lead. Nidec model # A34886-58PW.
|
38615 NIDEC® FAN |
Eye Of The Muffin Fan
It's 5-7/8" dia x 1-1/2" thick, but the sides of the round fan flare out to 6-3/4" in two little points holding 1/8" dia mounting holes. This makes it vaguely oval, or eye-shaped. Rated for 12-26VDC, it draws 330 to 800mA. Blows 247 CFM at 24VDC, spins CW and has (7) blades and 14" tinned leads. Made in Germany by Papst®.
|
38646 EYE MUFFIN |
Shop by Popular Tags
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »
