Express Shop!
Search Our Stuff
View Cart (0)
Sign In/Up! (It's Worth It!)
Giant Sucker
Huge black soft rubbery suction cup, 4-3/4" dia with a handle molded onto the back. Made in Taiwan, the French and English labeling suggests it was destined for use as a dent puller or glass carrier. Which is fine if you have dents to pull and glass to carry. If not, use it as a non-invasive and or temporary hanging device in locales where such features are desirable, such as hotel rooms, boat hulls, windows, and the sides of fine antiques (Grandmothers excepted). It is really powerful!!
 |
88956 GIANT SUCTION CUP |
Lesser Cleat
Sounds like an endangered member of the marmot family, but it's really a 4-1/2" long x 1/4" thick unplated steel cleat for tying off rope or cord. The 1-1/4" long mounting portion has (2) 3/16" dia holes. When mounted, it will stand approx 3/4" off the wall.
|
37873 CLEAT |
Popular Tags:
laughter
SEELCLEETS
HARDWARE
|
Add Tag 
Bottle Hooks
Winner of the AS&S Clever Devils Award of 2008. Our each is a set of (4) black-plastic hooks (2-3/4" long x 1/2"+ openings, with gates) that screw onto standard pop-bottle threads. Made to create portable tarp weights (fill the bottles with sand or water, hang them from the tarp grommets), they're also just ducky for creating bird feeders, hanging baskets and storage containers, insect traps, targets and lots of other stuff, not least of which would be a way to hang up your Coke®.
|
38390 CINCHTITE HOOK |
Hang Tough
And hang without drilling holes in your locker, file cabinet, or fridge. Our each is a package of (2) 1/4" dia nickel-plated cuphooks, 1/4" ID, on tough 1-1/2" dia magnets. Will hold approx 15 lbs+, or more than your jacket and keys, unless you're the janitor at the Pentagon.
|
93485 MAGNAHOOKS |
Stick 'Em Up...
with their 1-3/4" suction cups and then pull down the 2" x 3/4" white plastic hooks when you've got something to suspend. We're thinking shower stalls and doors, the inside of car windows, school lockers, anyplace with not-too-heavy hang-ups where you can't drill a hole. Our each is a 2-pack.
|
37718 SUCTION HOOKS |
Tilt & Swivel Mounts
Our each is a pair of Monster-brand nearly-universal-joint mounts for speakers, but adaptable for lots of other uses. Steel and forged aluminum, with your choice of a black- or white-enamel finish, they swivel 360°, tilt up to 210° and come with mounting hardware, bolts, mollies, and straps. They’re approx 3-3/8” long on a 2” x 3” plate and hold up to 8 lbs each, and the speaker/whatever-holding end is tapped to take a 7/16”-14 bolt. Made for use with Bose® Acoustimass, Lifestyle, or Outdoor speakers
|
37791 BLACK UNIMOUNT | |
|
37790 WHITE UNIMOUNT |
Instructions Included
Thank goodness! You wouldn't know what to do with this gearshift knob if the package didn't say "Remove old knob and press new knob on shaft." You might otherwise have taken the plastic, black-vinyl-covered knob (it's 2" long, 1-3/8" dia at the closed end, mounts on a 3/8" dia shaft) and used it as a model wheel, or a birthday candle holder, or a fountain pen ink dispenser. The package also says it's intended for a GM column-mount gear shift.
|
27900 GEARSHIFT KNOB |
Hang It All
Do you park you car outside because there's no room in the garage? Clean up the clutter with the A.S.&S. "S" hangers collection. Get a couple of 5" long S-hooks, and another couple of 7" long S-hooks. Both are 3/16" dia. steel. Our package of 5" hooks will get you (8) pcs and 7" hooks will get you (4) pcs. That was easy! And the cleanup should last for a week or two! No sweat.
|
32441 5" S-HOOKS | |
|
32442 7" S-HOOKS |
Versatile Grommet
A rubber grommet, 7/8" dia x 11/16" thick, with a brass insert that forms a flange over one face and lines about 3/4" of the length of the 1/4" dia bore. Use it as a grommet, a shock mount, or both. With or without a brass wire hanger that is set under the insert flange and extends 1" to the side. The hanger is bent to hold a 1/4" dia wire.
|
30601 GROMMET W/ HANGER | |
|
30443 GROMMET W/O HANGER |
Hole Liner
Heyco #SB-625-500 hard black plastic grommet. Split down the side, it is 11/16" OD, 1/2" ID to fit a 5/8" dia hole. It is 17/32" long OA with a small flange at one end, and a snap positioned 9/32" back on the shaft. Sounds about right for a 1/4" thick panel to us.
|
22707 PL GROMMET, 1/2" ID |
By Hook Or By Crook
Hook, we suggest, because stealing is a crime. Try this threaded, 1/4" dia steel J-hook, 4" long OA. The ID of the hook is just under 7/8".
|
37872 HOOK |
Shop by Popular Tags
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »
