Express Shop!
Search Our Stuff
View Cart (0)
Sign In/Up! (It's Worth It!)
Home
/ Hardware
A Painful Choice
A thumbscrew, if you have an enemy with fat thumbs -- a thumbscrew-style hose clamp, if not. Metal, adjustable between 3/4" and 1-1/2". We suggest that this would be a good time to fix that leaky hose, before your wife starts eyeing your diphalangal digits.
 |
32715 HOSE CLAMP |
Leveling Trio
If in this offering you can't find the leveling feet to get that table steadied, it is time to get a new table. The feet have 3/8-16 threaded stems and fit the listed insert. The feet: #29977 will lift a leg from about 1/2" to 1-1/4" off the floor and has a plain, flat 7/8" wide hex shaped base.
 |
29980 LEVELING INSERT | |
|
29977 SHORT LEVELING FOOT |
Tilt & Swivel Mounts
Our each is a pair of Monster-brand nearly-universal-joint mounts for speakers, but adaptable for lots of other uses. Steel and forged aluminum, with your choice of a black- or white-enamel finish, they swivel 360°, tilt up to 210° and come with mounting hardware, bolts, mollies, and straps. They’re approx 3-3/8” long on a 2” x 3” plate and hold up to 8 lbs each, and the speaker/whatever-holding end is tapped to take a 7/16”-14 bolt. Made for use with Bose® Acoustimass, Lifestyle, or Outdoor speakers
|
37791 BLACK UNIMOUNT | |
|
37790 WHITE UNIMOUNT |
Instructions Included
Thank goodness! You wouldn't know what to do with this gearshift knob if the package didn't say "Remove old knob and press new knob on shaft." You might otherwise have taken the plastic, black-vinyl-covered knob (it's 2" long, 1-3/8" dia at the closed end, mounts on a 3/8" dia shaft) and used it as a model wheel, or a birthday candle holder, or a fountain pen ink dispenser. The package also says it's intended for a GM column-mount gear shift.
|
27900 GEARSHIFT KNOB |
Standard Standoffs
At these prices, you can afford to build yourself the world’s tallest standoff. Start with our pack of (4) 6” lengths. Go from there. Each standoff is plated steel, with a 3/8” length of 3/16”–32 thread at one end, and a matching bore at the other.
|
34599 6" STANDOFF |
Little Gripper Strips
Hook-and-loop fabric strips, 10" long x 5/8" wide for holding stuff together without zippers, snaps, pins, clasps, glue, tape, rivets, buttons, clamps, nails, screws, nuts, bolts, flash-welding, or legally binding contracts. Your package will contain (2) sets of black and 2 sets of white strips with self-adhesive backs.
|
38434 HOOKS & LOOPS |
It All Hinges On This
Our each is a pair of plain hinges, brass-plated with non-removable pins. You pick from 1" tall x 1/2" wide when closed; 2" tall x 3/4" wide closed; or 2-1/2" tall x 7/8" wide closed. All have (4) mounting holes and come with slotted screws.
|
93253 1" HINGE | |
|
93254 2" HINGE | |
|
93255 2-1/2" HINGE |
Strap 'n' Latch It
Medium-duty nylon tie-down, 1" wide x 5-foot long, in assorted colors (which we'll pick). It has a non-ratcheting, spring-loaded steel latch with a 1-1/4" ID, and a 4-1/2" long, rubber-coated steel hook. The hardware is heavier-duty than the nylon strap.
 |
37937 TIE DOWN STRAP |
Big Hinge Bonanza
Call us Hinge City. Our each is a pair, on account of who needs one hinge. All the leaves on these steel hinges are a sturdy 1/8” thick, have (4) 5/16” dia countersunk holes, and come packed with both wood and sheet-metal mounting screws.
| Length/Inches | Leaf Width | ||||
|---|---|---|---|---|---|
|
38074 HINGE | 4-1/2" | 1-7/8" | Details | |
|
38075 HINGE | 4" | 1-11/16" | Details | |
|
38078 HINGE | 4-1/2" | 1-5/8" | Details | |
|
38079 HINGE | 4-1/2" | 1-5/8" | Details | |
|
38084 HINGE | 4-1/2" | 1-7/8" | Details | |
|
38086 HINGE | 4-1/2" | 1-15/16" | Details | |
|
38087 HINGE | 4-1/2" | 1-15/16" | Details | |
|
38088 HINGE | 4-1/2" | 1-3/4" | Details | |
|
38089 HINGE | 4" | 1-5/8" | Details |
White Wire Ties
A hundred of them at under 2 cents a pop. Or a zip. Our each is a bag of white nylon wire ties with (40) at 4" long x 3/32", (30) at 6" x 3/32", (20) at 8" x 1/8", and (10) at 10" x 1/8". Every toolbox should have at least one bag of these.
|
37061 CABLE TIES |
Popular Tags:
phils
ChimeStraps
jka
|
Add Tag 
Hang It All
Do you park you car outside because there's no room in the garage? Clean up the clutter with the A.S.&S. "S" hangers collection. Get a couple of 5" long S-hooks, and another couple of 7" long S-hooks. Both are 3/16" dia. steel. Our package of 5" hooks will get you (8) pcs and 7" hooks will get you (4) pcs. That was easy! And the cleanup should last for a week or two! No sweat.
|
32441 5" S-HOOKS | |
|
32442 7" S-HOOKS |
Shop by Popular Tags
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »
