
Our largest carabiner ever. Measures approx 8" x 5" x 1/2" thick with a 3-5/8" snap hook and a long padded grip. Not for your keys, please, but just ducky for carrying or hanging tools, a hank of rope, a coiled hose, anything that will slide onto it. Will support up to 150 lbs, which means that now you can carry your chain saw on your belt! In assorted colors of anodized aluminum.
![]() |
94094 GIANT CARABINER |
Good all purpose description of a plastic dinkus that will fit in the end of a square tube to seal the end, serve as a glider for a chair leg, act as a stool in a doll house, or be the basis for a dolls graduation mortar board. It is black plastic, 3/4" sq OA and will fit in, and cap a 5/8" ID square hole. 9/16" Tall.
![]() |
23272 PLASTIC PLUG, 3/4" SQ |
Mount this brass-finish window stop on the inside of the top frame of a standard double-hung window, and stop the lower pane from opening beyond the point you pick. Unlocks from the inside only. Slide the 1/2" stopper around the corner and the bottom pane will open all the way. Each stop is 2-1/4" x 1-1/2". Includes mounting screws. Each package has (2) locks, so you can secure (2) windows.
![]() |
39473 WINDOW STOP |
If you had self-adhesive feet…it would be very hard to get your socks off. But if you had these little Scotch-brand self-adhesive rubber feet from 3M, you wouldn't have to worry about scratching the furniture, or things sliding off the table or desk. There are (12) in a pack and we'll send you (2) packs of square white rubber pads, 1/2" sq x 1/4" thick.
![]() |
39823 WHITE ADHESIVE FEET |
These washers just take up space. But then, that's their job. Our flat steel washers measure 1-1/4" OD x 3/4" ID x 1/32" thick. With (20) at 1/32" thick, you'll be able to add just the right amount of incremental height. And who can't use a little more height, and a few more washers.
![]() |
39930 FLAT WASHERS |
Get a little attitude in your home decor with these hooks for hanging anything from lamps to plants to pictures. About 3" long with a fancy swivel base and shiny brass finish, each comes complete with a wood screw and toggle bolt for mounting on wood or wallboard.
![]() |
32069 SHINY BRASS HOOK |
Simple is good, and life don't come much simpler. This U-shaped 1-1/8" deep drawer pull/cabinet handle is molded cream-colored plastic. Matte finish, 3/8" dia, 3/16" unthreaded bores, 4" centers. Recycle a couple of screws from the old handle, 'cause we won't be sending you new ones. Simple.
![]() |
33397 DRAWER HANDLE |
Rubber stoppers for sinks, tubs and basins are tapered to provide a watertight seal. 3/4" metal ring for easy removal resists corrosion. Large stopper fits 1-3/4" dia drain. The Small stopper fits 1-1/2" drains.
![]() |
32465 LARGE STOPPERS | |
![]() |
32464 SMALL STOPPERS |
Brass L-shaped shoulder hooks (Why aren't they elbow hooks?) are handy to have around. Each has a thread about half as long as the hook itself, and a small plate that fits against the wall. You get (2) packages, for a total of (6) 1" hooks, or (4) 1-1/2" hooks.
![]() |
33789 1" SHOULDER HOOKS | |
![]() |
33788 1-1/2" SHOULDER HOOKS |
Call it the Retracta-Strap. This unique 1" wide x 6-foot red canvas tie-down strap from Erickson Manufacturing has an 8" x 3" x 2" retractor housing in the center, with a length-adjusting cam to tighten the strap and lock it at any length. There's a coated 4-1/4" x 1" S-hook at each end. Safe working load is 300 lbs.
![]() |
39890 RETRACTABLE STRAP |
Very handy strap-like fastening devices with grooves or slots along their length and a clamping head at one end. Slip one around the things to be bundled, feed the free end through the clamp and pull tight. The grooves act like a ratchet in the clamp; the tighter you pull, the tighter it holds. They are a great non-rotting securing device for camping gear, sails, hanging signs, and, of course for bundling wires.
![]() |
30579 WIRE TIE, 5-1/2" |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »