
This heavy-duty brass-plated steel hinge is 3-1/2" x 1-1/2", with 3/8" dia knuckles. It has (3) holes per leaf and comes with mounting screws. Packed singly -- don't forget to order the quantity you need.
![]() |
35116 BRASS HINGE |
Which is what happens to swivel hooks. Because I can then swivel and turn without ever unscrewing myself from the ceiling and dropping stuff on your head, on account of I know you hate that. And I come with a buddy just like me-we're a matched set of swivel-style ceiling hooks in black-coated aluminum with 1/2" wide openings. And we come with a pair of wood screws plus a bonus set of 2-1/2" toggle bolts, in case the ceiling isn't up to doing its part.
![]() |
37475 SWIVEL HOOKS |
Heyco #SB-625-500 hard black plastic grommet. Split down the side, it is 11/16" OD, 1/2" ID to fit a 5/8" dia hole. It is 17/32" long OA with a small flange at one end, and a snap positioned 9/32" back on the shaft. Sounds about right for a 1/4" thick panel to us.
![]() |
22707 PL GROMMET, 1/2" ID |
If you had self-adhesive feet…it would be very hard to get your socks off. But if you had these little Scotch-brand self-adhesive rubber feet from 3M, you wouldn't have to worry about scratching the furniture, or things sliding off the table or desk. There are (12) in a pack and we'll send you (2) packs of square white rubber pads, 1/2" sq x 1/4" thick.
![]() |
39823 WHITE ADHESIVE FEET |
Get a little attitude in your home decor with these hooks for hanging anything from lamps to plants to pictures. About 3" long with a fancy swivel base and shiny brass finish, each comes complete with a wood screw and toggle bolt for mounting on wood or wallboard.
![]() |
32069 SHINY BRASS HOOK |
That would be us. Nuts from America? That would be these made-in-the-USA locking nuts, 1-1/16" hex with an 11/16" - 12 thread, and just under 7/16" thick.
![]() |
39879 LOCKING NUTS |
Good all purpose description of a plastic dinkus that will fit in the end of a square tube to seal the end, serve as a glider for a chair leg, act as a stool in a doll house, or be the basis for a dolls graduation mortar board. It is black plastic, 3/4" sq OA and will fit in, and cap a 5/8" ID square hole. 9/16" Tall.
![]() |
23272 PLASTIC PLUG, 3/4" SQ |
A strangely clever device that allows you to take a hanging plant or light fixture and swag it up to 12 inches away in any direction. Also adjusts the height, of course. Lets you put plants into or out of the sun, move a light over or away from a table. Easy to use, and just as easy to remove, with no screws or damage. It's white-enameled metal, 1/4" dia x 17-5/8" long with rubber feet where it touches the ceiling. Supports 8 lbs at a distance of 12".
![]() |
38979 SWAG IT |
Call it the Retracta-Strap. This unique 1" wide x 6-foot red canvas tie-down strap from Erickson Manufacturing has an 8" x 3" x 2" retractor housing in the center, with a length-adjusting cam to tighten the strap and lock it at any length. There's a coated 4-1/4" x 1" S-hook at each end. Safe working load is 300 lbs.
![]() |
39890 RETRACTABLE STRAP |
Top or bottom. You pick. Our little yellow-plastic drain stopper fits a 1-1/16" opening. Flip off the attached cap and it's a strainer. Our littler yellow-plastic top, made to fit a 1/2" opening and reduce it to 3/16", to maybe convert a pour spout to a squeeze nozzle, has an attached stopper.
![]() |
38494 DRAIN STOPPER | |
![]() |
38495 NOZZLE STOPPER |
White plastic swiveling feet for 1" dia furniture legs. We suggest that they might also serve as pedestals for small kinetic sculptures. 1-1/8" high overall, they appear to add about 3/8" to the height of your table, chair or stabile.
![]() |
27231 FURNITURE FEET |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »