Express Shop!
Search Our Stuff
View Cart (0)
Sign In/Up! (It's Worth It!)
Home
/ Robot Partz
Small Is Beautiful
And this little 6-12VDC new gear motor is a stunner. Made for a telescope drive, it draws approx 100mA and spins approx 5 rpm at 12VDC. Has a 5/16" dia, 16-tooth sprocket on a 5/8" long shaft and is 2-7/16" x 1-7/8" x 2-5/8" OA. The gearbox ratio is approx 100:1. Has a short (3") 2-pin jumper for power and the stall current at 12VDC is 2A.
 |
92651 6-12V GEAR MOTOR |
Hobby Motors
You'll get two-fer-cheap. This permanent-magnet DC motor from Molon operates from 6-12VDC, max efficiency at 12VDC, 11,100 rpm at 1.40A. Measures 1-1/2" long x 1-1/16" dia with a 3/8" long x 3/8" dia striated shaft. Has (2) mounting holes on the face and power tabs on the back. Molon model numbers CMO-1237 and FRS-385S-2358N
|
37857 MOLON HOBBY MOTOR |
Nifty Plastic Gear Set
Made as a repair kit for Xerox® drive motors (kit part #600K24560), these (3) white plastic gears are crying out for a home in someone's robotics lab. The largest is 1-1/2" thick OA with an 8mm bore. The gear is 1-7/8" dia with 46 teeth/24 pitch, the spindle is 1-1/16" dia with 25 teeth/24 pitch. The middle one is 3/4" thick OA with a 6mm bore. That gear is 1-5/8" dia with 74 teeth/48 pitch, the spindle is 11/16" dia with 15 teeth/24 pitch. The smallest is 1-5/16" thick OA with a 6mm bore. The gear is 1-1/4" dia with 38 teeth/32 pitch, the spindle is 7/8" dia with 21 teeth/24 pitch.
|
37580 GEAR REPAIR KIT |
Wanna Toggle?
The correct answer is "I don't know; I've never toggled." If, however, you just want to turn something on and off, here's a choice of toggles for your switching delectation. The DPDT toggle is rated for up to 20A at 125VAC and has screw terminals below. Measures 1-1/4" x 1-3/4". No center-off position. The first DPST toggle is rated for 20A at 125VAC or 15A at 250VAC. Screw terminals on the bottom. Measures 1-5/16" x 3/4". The smaller DPST toggle is rated for up to 4A at 125VAC or 2A at 250VAC. Has 3/16" spade terminals on the bottom and measures 1" X 9/16". All the toggles come with switch-plates and mounting nuts.
|
38715 DPDT TOGGLE 20A (A) | |
|
38716 DPST TOGGLE 20A (B) | |
|
38717 DPST TOGGLE 4A (C) |
Irresistible Capacitor Collection
Ten dozen, to be exact. Our package of 120 radial lead electrolytic capacitors comprises: (15) each of 1uF, 2.2uF, 4.7uF, 10uF, and 22uF at 50V, (15) each of 47uF and 100uF at 25V, and (5) each at 220uF, 470uF and 1000uF at 25V. From Velleman®.
|
93493 120 CAPACITORS |
Got Old Amps?
Measure them with this old-school DC analog dial ammeter with a 2-3/4" square housing and a 2-1/4" x 1-1/2" face that reads between 0 and 75A. Has (2) 1" long threaded terminals that appear to be from a charging unit. Comes with a matching bracket but needs a couple of grommets so it won't short out. Made sometime in the past in Chicago.
|
39321 AMP METER |
You Say Breadboad...
And the manufacturer, Elenco Electronics, says Bredblox, but what’s in a name? These are just nice little breadboards for electronic experiments. The Elenco Model 9830 measures 6-1/2" long x 2-1/8" wide x 5/16" thick with (2) power busses up both long edges and (63) double rows of more busses. The holes for components and jumper wires are approx .050" each and multiple boards can be interlocked via tabs and ports on the long edges. The Elenco Model 9418 is 6-1/2" x 1-3/8" x 5/16" and otherwise the same as the 9830, but without the power busses. Now go invent something and get rich.
|
38220 9418 BREADBOARD |
$3.95
EACH
Out of Stock. Check Back Soon! |
|
93061 9830 BREADBOARD |
Mighty Nice
Need a small solenoid with a big attitude? Our 24-Hour Electro-Mechanical Conversion Testing Department tells us these are both "pretty nice little solenoids." (They talk like that.) Our 24VDC pull-type solenoid draws 8.5A at the start and 4.5A to hold. The coil measures 2-1/8" long x 3/4" dia with a 2-pin connector on the bottom and is mounted on a 3-5/8" long x 3/4" wide slotted mounting bracket. The 3" long spring/plunger has a 1-3/16" throw.
|
36133 24 VDC SOLENOID |
Rather Switch Than Fight?
Try our 12VDC SPST rocker switches. The rectangular version is for use at 20A and has a green LED in the paddle. Fits a 1-1/8" x 7/16" hole, and the switch itself is 1-1/4" x 1-11/16" x 1" deep, in black, with quick disconnect terminals. From Calterm®, #40343. The square switch is for use at 25A with an LED in the circular paddle and fits a 5/16" dia hole. The switch itself is 1-1/8" square x 9/16" deep, and quick disconnects on the bottom. From Calterm® #40602.
|
38821 RECTANGULAR SWITCH | |
|
38822 SQUARE SWITCH |
Line Cords
Super handy things to have around your workshop. These line cords are all made up with molded plugs on one end to give your projects that professional finished appearance. Great for repairs...and to replace an existing cord with one that is the proper length for the new location. New, (except as noted) and first quality.
| Gauge | No of Wires | ||||
|---|---|---|---|---|---|
|
38864 LINE CORD, 10" | 16 | 3 | Details | |
|
20619 LINE CORD, 18' | 18 | 3 | Details | |
|
35222 LINE CORD, 9' EUROPEAN | 14 | 3 | Details |
Johnson Motor
This reversible DC Johnson motor (Johnson #34513) operates from 12-24VDC with a max efficiency of 24VDC, 3057 rpm, and .14 amps. Measures 1-3/16" dia x 1-3/16" long with (2) hook-up tabs on the back and a 3/32" x 5/16" long slotted shaft. Has (2) mounting holes on the face. Works great as a small generator, output 2.5-3 V. Draws 30mA no load, and spins about 1200 rpm at 12VDC.
|
37855 JOHNSON MOTOR |
Shop by Popular Tags
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »
