
120VDC powerhouse motor! Made in the USA by Johnson Motor, part # DC971(2)LG, it spins at 11,000 rpm, draws 1/2A no load and stalls over 10A. It's a brush type, but not universal so you'll need a rectifier to convert the AC to DC. Motor measures 3-3/4" long x 2-1/8" dia with (2) mounting wings with 5/32" holes in line with the brushes. Output is via a 5/8" dia x 1/2" 12-tooth sprocket. Typical applications include floor polishers and buffers. UL.
![]() |
40884 11,000 RPM 120VDC JOHNSON MOTOR | |
![]() |
40908 600 VOLT BRIDGE RECTIFIER |
The correct answer is "I don't know; I've never toggled." If, however, you just want to turn something on and off, here's a choice of toggles for your switching delectation. The DPDT toggle is rated for up to 20A at 125VAC and has screw terminals below. Measures 1-1/4" x 1-3/4". No center-off position. The first DPST toggle is rated for 20A at 125VAC or 15A at 250VAC. Screw terminals on the bottom. Measures 1-5/16" x 3/4". The smaller DPST toggle is rated for up to 4A at 125VAC or 2A at 250VAC. Has 3/16" spade terminals on the bottom and measures 1" X 9/16". All the toggles come with switch-plates and mounting nuts.
![]() |
38715 DPDT TOGGLE 20A (A) | |
![]() |
38716 DPST TOGGLE 20A (B) | |
![]() |
38717 DPST TOGGLE 4A (C) |
Save your marriage. Double your juice on the road with this unfused male cigarette plug with dual feminine plug outlets on 6" long leads. Plug it in and you don't have to decide which phone to charge in the car. You both win!
![]() |
40561 SINGLE MALE TO DOUBLE FEMALE CAR ADAPTER |
Want to trigger something? Start with this honey of a pre-wired, ready-to-go take-out trigger/speed/polarity assembly from a cordless drill. Includes pre-wired IRFZ44N power MOSFET chip mounted on a heat sink. Feed voltage up to 20VDC to the (2) edge connectors at the shorter leads and attach a motor to the longer ones. The CW/off/CCW switch is below the trigger. The entire assembly measures 6" x 2-3/4" x 1-1/4", not counting the 4" leads.
![]() |
40260 VARIABLE SPEED DRILL TRIGGER ASSEMBLY |
We really like these plastic scooter wheels. They measure 3-5/16" OD x 1" wide with beveled tires so a relatively thin edge meets the road. Dual 5/16" ID bearings. You get a pair of the same color, either green or purple. The plastic material has a very slight give to it for durability. It may also have a cracked look, but that won't affect its fun or functionality quotient.
![]() |
40979 SNAZZY TAPERED SCOOTER WHEELS |
This pristine new take-out fused panel from a film projector (remember them?) has a DPST rocker switch and an IEC input plug that feeds a 3A fused line and an 8A line that leads to a load-protected relay. Panel measures 4-3/8" x 5-1/8" overall and needs 4" clearance in back. Made in the USA.
![]() |
40828 FUSED PANEL WITH DPST ROCKER SWITCH |
This rechargeable NiMH 9V battery has no memory effect (that's a good thing) and the manufacturer, Rayovac®, says it'll be good for (500) charge cycles. That's also a good thing. No rating available, but it should be approx 200mAH. Whyfor the "Hybrid" name on the package? Because hybrids are hot!
![]() |
40459 RECHARGEABLE 9 VOLT |
Can you say Science Project? You get the whole shebang (45 pieces) in one plastic set: (30) bushings in assorted thicknesses, (4) 5/16" dia gears, (2) 1-1/8" dia pulleys, (2) 3/4" dia pulleys, (4) 7/16" dia pulleys, (4) 2" rubber-band belts and (1) 40" length of elastic cord. Includes graphic directions. Made to use with small DC motors with 1/16" shafts.
![]() |
94009 PULLEY & BELT KIT |
Works on all of them except the ones stuck to your eyeballs. Corrosion-Be-Gone is a gel made to remove the schmutz from all types of battery terminals, circuit boards and contacts, on everything from cars to computer boards. Our each is a 0.3 oz jar.
![]() |
93684 BATTERY GOOP |
WARNING: CHOKING HAZARD-Small Parts. Not for children under 3 yrs.
From the HEXBUG™ collection of micro-bots: Pick the Original HEXBUG, a little six-legged cutie that scrambles around, and reacts to loud sounds and physical obstacles by changing direction. Or the HEXBUG Crab, a mesmerizing creature that runs from the light and hides in the dark, reacts to loud sounds, and changes directions at preprogrammed intervals. In assorted translucent colors (we’ll pick), with replaceable button-cell batteries included. All are approx 2” x 1-3/4”.
![]() |
93840 HEXBUG CRAB | |
![]() |
93839 HEXBUG ORIGINAL |
Bring these bearings to bear on your next project. Our supply and variety is constantly rolling over so get ‘em while we got ‘em!.
| O.D. | I.D. | ||||
|---|---|---|---|---|---|
![]() |
33505 BEARING, 19MM | 19mm | 7mm | Details | |
![]() |
40281 BEARING, 2-7/16" | 2-7/16" | 1-3/16" | Details | |
![]() |
39108 BEARING, 20MM | 20mm | 6.5mm | Details | |
![]() |
39900 BEARING, 23MM | 23mm | 13mm | Details | |
![]() |
39110 BEARING, 24MM | 24mm | 8mm | Details | |
![]() |
39905 BEARING, 35MM | 35mm | 15mm | Details | |
![]() |
39901 BEARING, 40MM | 40mm | 23mm | Details |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »