Express Shop!
Search Our Stuff
View Cart (0)
Sign In/Up! (It's Worth It!)
Home
/ Robot Partz
Peculiar Sound Module
This guy used to part of something else, but we know not what. Legends on the board refer to (2) players, (4) balls, and (3) hits, and it makes a very endearing, weird undulating outer-space-ish sound, plus a second, semi-explosive ray-gun zapping noise. Maybe an old Buck Rogers baseball game? Whatever it is, at this price you can't afford not to have it. It lights up, too, with (6) red LEDs, and has (2) numeric displays in the old, 8-segment LED style, plus a 3-position slide switch, a momentary push-button switch, and a 5.5mm female jack for power on the back. Zap it with 6VDC and it sounds off. In a red plastic case 4-1/4" x 3-7/8" x 1-3/4" with (4) mounting brackets and a 14" long, 7-wire harness.
 |
38625 SOUND MODULE |
Jump on These
Incomparable bulk pricing. 22AWG jumpers, 16" long wires with 1/4" spade connectors at both ends. In red or green-you pick.
|
36309 JUMPER WIRE, GREEN | |
|
36308 JUMPER WIRE, RED |
Mighty Nice
Need a small solenoid with a big attitude? Our 24-Hour Electro-Mechanical Conversion Testing Department tells us these are both "pretty nice little solenoids." (They talk like that.) Our 24VDC pull-type solenoid draws 8.5A at the start and 4.5A to hold. The coil measures 2-1/8" long x 3/4" dia with a 2-pin connector on the bottom and is mounted on a 3-5/8" long x 3/4" wide slotted mounting bracket. The 3" long spring/plunger has a 1-3/16" throw.
|
36133 24 VDC SOLENOID |
Plenty Big Caster
For carrying plenty of weight. This is a heavy-duty, solid, hard-rubber caster with a 3" dia x 2" wide wheel and a 7/16" dia axle. It's on a 4-1/8" x 3-1/8" steel plate with 5/16" mounting holes at the corners. Good for 300 lbs easy. Used, so the wheel might be a little scuffed. This is a single caster, remember, so order the number you need.
|
39148 BIG CASTER |
Treat With Heat
Start with one naked wire or a number of them, and a piece of our clever tubing, and end up with nice, tightly covered wire. For the specific diameters below, our each is a package of (10) 12" pieces of heat-shrink tubing. For an assortment of sizes, our each is a dozen pieces of 4" long tubing. You'll get (4) pieces each in 1/8", 1/4" and 1/2" diameters. All sizes are black. All will shrink to trim diameters half their current size when heated to 125°C/257°F. If only it worked on waistlines.
|
92441 1/2" SHRINK TUBE | |
|
92440 1/4" SHRINK TUBE | |
|
93365 1/8"-1/2" ASST. SHRINK TUBE |
Battery Pack
Handyman special. You pick a battery holder to fit your project. The D-cell holder is an enclosed hard black-plastic case, 2-3/4" x 6-1/4" x 1-5/8" with space inside for (4) "D"s, designed to give 6V output via a 30" long cord with a 1/8" miniplug. (Originally made to power a tabletop fountain.) The C-cell holder is an open-top white-plastic tray, 2-1/8" x 4-1/4", into which you snap (4) "C"s for 6V output. Attached with a short lead is a 1" square box with a 1/8" jack and a slide-switch to control the power.
|
38680 C CELL HOLDER | |
|
38679 D CELL HOLDER |
Rather Switch Than Fight?
Try our 12VDC SPST rocker switches. The rectangular version is for use at 20A and has a green LED in the paddle. Fits a 1-1/8" x 7/16" hole, and the switch itself is 1-1/4" x 1-11/16" x 1" deep, in black, with quick disconnect terminals. From Calterm®, #40343. The square switch is for use at 25A with an LED in the circular paddle and fits a 5/16" dia hole. The switch itself is 1-1/8" square x 9/16" deep, and quick disconnects on the bottom. From Calterm® #40602.
|
38821 RECTANGULAR SWITCH | |
|
38822 SQUARE SWITCH |
Add-A-Car-Plug
Connect any of those neat 12-volt appliances to your car's cigarette lighter port. This universal 12V accessory plug has a built-in, replaceable 5A fuse and (2) 5" leads (the positive is striped) with crimp connectors.
|
38168 12V ACCESS PLUG |
Push Our Button
A push-button switch that stays pushed. This latching SPST pushbutton switch is rated for 6A at 125VAC or 3A at 250VAC. Has a 3/8" dia shank, mounting nuts, and 6" leads. From Gardner-Bender®. UL.
|
39166 PUSH BUTTON SWITCH |
Muffin Bonanza
Our special Little-Fans-R-Us offering. All these muffin fans are square and all have mounting holes at the corners. "Com" = Comair-Rotron. "Mech" = Mechatronics, Inc., Aav is Aavid Thermalloy. All are UL. For more information including manufacturer part number and quantity discounts, please contact customer service.
| VOLTS | SIZE | ||||
|---|---|---|---|---|---|
|
39126 MUFFIN FAN | 12 VDC | 2-3/4" x 1" | Details |
Capacitors-No PCB'S
We have a bunch of can capacitors of the type needed to start many motors and blowers - or do other things. Check the table and see if we have what you need.
| Rating | Manu/Part No. | |||
|---|---|---|---|---|
|
26089 CAPACITOR, 2.03 MFD | 570 VAC, 60 Hz | GE/21L219R |
Shop by Popular Tags
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »
