
We're thinking DIY light fixtures for these 1Watt 6-LED modules. Regulated and reverse-polarity protected for voltages between 8 and 30VDC. Each is 1" x 1-1/4" with a 120-degree viewing angle and 5" leads. You can wire multiples together using small solder pads at the end of each PC board. Just match up the numbers. And don't look directly at them. You pick LEDs that are white (87 lumens) or green (65 lumens).
![]() |
94215 GREEN LED MODULE | |
![]() |
94213 WHITE LED MODULE |
Ten dozen, to be exact. Our package of 120 radial lead electrolytic capacitors comprises: (15) each of 1uF, 2.2uF, 4.7uF, 10uF, and 22uF at 50V, (15) each of 47uF and 100uF at 25V, and (5) each at 220uF, 470uF and 1000uF at 25V. From Velleman®.
![]() |
93493 120 CAPACITORS |
All from GB® (Gardner Bender) or IDEAL® all bargains. The small SPST toggle switch, 1" x 1/2" x 1/2", has a switchplate, 3/8" bat, and 5-1/2" leads. Both panel mount DPST toggle switches, 1-3/8" x 3/4" x 1-1/8" OA, work with larger motors or appliances. Has screw terminals on the bottom and mounting hardware. The 1-1/8" x 5/8" x 1" deep OA momentary SPDT toggle switch, center off, is for back-and-forth switching, as with a winch. It's 3/4 HP max. Includes mounting hardware. The IDEAL® DPDT toggle switch is center off, 1-5/16" x 3/4" x 1-1/8" deep OA, comes with mounting hardware and is latching. All are UL/CSA.
| Amps | Volts | |||
|---|---|---|---|---|
![]() |
40042 DPDT TOGGLE CENTER OFF (IDEAL®) | 10/20/ | 250/125 | |
![]() |
39051 DPST TOGGLE (GB) | 10/20 | 250/125 | |
![]() |
40041 DPST TOGGLE (IDEAL®) | 10/20 | 250/125 | |
![]() |
39052 MOM SPDT TOGGLE (GB) | 20/10 | 125/177 | |
![]() |
39050 SMALL SPST TOGGLE (GB) | 6/3 | 125/250 |
And the manufacturer, Elenco Electronics, says Bredblox, but what’s in a name? These are just nice little breadboards for electronic experiments. The Elenco Model 9830 measures 6-1/2" long x 2-1/8" wide x 5/16" thick with (2) power busses up both long edges and (63) double rows of more busses. The holes for components and jumper wires are approx .050" each and multiple boards can be interlocked via tabs and ports on the long edges. Now go invent something and get rich.
![]() |
93061 9830 BREADBOARD |
Our motor dude calls this DC reversible gear motor "very interesting." Rated for 3-24VDC with speed ranging from 75 to 654 rpm. The current draw is very low, 2.4mA no load and the highest readable stall current is 90mA. The motor itself is 1-11/16" long x 11/16" dia with a 7/16" long x 3/32" dia shaft with a 9mm (approx 3/8") single sheave, 2mm ID pulley on it. Motor is connected to a monodirectional drive assembly with some mystery circuitry glued to it. Feel free to discard this. Motor is German, gearhead and drive train are Swiss.
![]() |
40817 DC GEAR MOTOR ASSEMBLY |
You pick a 4-pack of "AA" or "AAA" rechargeable NiMH batteries from Rayovac®. "AA"s are rated for 2000mAH at 1.2V; "AAA"s are rated for 750mAH at 1.2V. Manufacturer boasts 4X the number of pix from digital cameras compared to standard alkaline batteries. Please note: Our catalogs 279/280 have a typo. The "AAA" batteries are 750mAH not 1800mAH. Sorry for the inconvenience.
![]() |
40348 "AA" RECHARGEABLES | |
![]() |
40349 "AAA" RECHARGEABLES |
Sorry, no Irish whisky, just these lovely little black rubber bushings, 3/8" OD x 1/8" ID x 3/16". Use them as bushings or string 'em along and make waterproof necklaces (think black puka shells) for synchronized swimmers.
![]() |
12594 1/8" THICK BLACK RUBBER BUSHINGS |
The "Sunforce® Solar Vent 1000" is a low-power, solar-driven exhaust fan, ideal for places where wiring is a problem. Reversible, but not super gutsy, it's meant to move air slowly in or out over a long period of time. Exterior is 8-1/2" dia with a 4-1/4" dia solar cell. Interior section is 4-1/4" dia plus a 3/4" plastic gasket. The mounting unit itself is 3-3/8" thick overall and is made to mount through a 4-1/4" dia hole in a thin surface: glass, polycarbonate, plywood, metal. We're thinking campers, greenhouses, sheds, doghouses, robot suits and the like. Will also run on the replaceable internal NiMH battery.
![]() |
94280 SOLAR EXHAUST FAN |
Super handy things to have around your workshop. These line cords are all made up with molded plugs on one end to give your projects that professional finished appearance. Great for repairs...and to replace an existing cord with one that is the proper length for the new location. New, (except as noted) and first quality.
| Gauge | No of Wires | ||||
|---|---|---|---|---|---|
![]() |
38864 LINE CORD, 10", 120VAC, 3-PRONG | 16 | 3 | Details | |
![]() |
41277 LINE CORD, 11FT, 120VAC 3-PRONG | 18 | 3 | Details |
$2.75
EACH
Out of Stock. Check Back Soon! |
![]() |
41278 LINE CORD, 11FT, 120VAC 3-PRONG | 18 | 3 | Details |
$2.75
EACH
Out of Stock. Check Back Soon! |
![]() |
35222 LINE CORD, 9' EUROPEAN 220VAC, 3-PRONG | 14 | 3 | Details |
We have a bunch of can capacitors of the type needed to start many motors and blowers - or do other things. Check the table and see if we have what you need.
| Rating | Manu/Part No. | |||
|---|---|---|---|---|
![]() |
26089 CAPACITOR, 2.03 MFD | 570 VAC, 60 Hz | GE/21L219R |
A pair of replacement wheels for the front legs of Gram's aluminum walker. (Or her Zimmer frame, if she's a Brit.) The 3" dia wheels fit most walkers, are already mounted on 1" ID extension legs that are 9-5/8" long and have (8) holes for adjusting the length to fit the height of the rear legs. If Gram's getting around just fine, maybe she needs new wheels on her shopping cart. Or on a stroller for one of the grandkids.
![]() |
39803 WALKER WHEELS |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »