Express Shop!
Search Our Stuff
View Cart (0)
Sign In/Up! (It's Worth It!)
Home
/ Robot Partz
Battery Pack
A take-out from a Game Boy" solar pack accessory, this little 3-pack of NiMH rechargeable batteries gives up to 3.6V at approx 1000mAH. The flat pack measures 2-5/8" x 2" x 1/4" thick with solder tabs at opposite corners and, yes, the cells can be separated.
 |
36483 3-CELL PACK |
The Secret Of NiMH
They take a licking but keep on recharging. Take your pick of NiMH batteries from the “AAA”, 800mAh; or the 9V (8.4V at 160mAh). All new. All rechargeable.
|
38966 9V NIMH |
5-Pin Socket
Ready to go. Originally made for a relay, it's already wired with 9" leads in black, red, white, yellow and blue run to its own quick-disconnect sockets, ready for your spade terminals. The 1-1/4" x 1-1/16" x 1" housing is slotted, so you can attach a series end-to-end. Made in the USA.
|
39381 SOCKET |
Nuts & Screws
Ten of each, to be precise. 1/4-20 threaded, the screws are 1-1/2" long with phillips/slot heads, and the nuts are of the hex persuasion. They're so pretty with their (10) matching 1/4" washers that you may just want to set them out and gaze at them. They are packed in pairs in a little plastic bags so we call your purchase a "pkg(5)"
|
28690 NUT/SCREW PACK |
Cable Tunnels
Keep cables together and in the equivalent of a conservative dark suit. You pick either the 10-foot length of 3/8" dia split wire loom (a split, flexible, corrugated black tubing) to hide all those wires, or a 7-foot length of the same stuff in 1/2" dia. Made in the USA by Gardner-Bender®. UL.
|
39171 1/2 INCH TUBE | |
|
39170 3/8 INCH TUBE |
The Monback Machine
Call it the Monback Machine, an electronic version of the guy directing you while you back in: "Monback, monback, monback, STOP!" You mount the 7-7/8" x 7/8" x 1-1/8" infrared-based back-up sensor near your rear license plate (or on it) and wire it to the reverse lights. A 1" black speaker with 10-foot leads mounts inside the car and beeps as you back up, getting faster and higher pitched as you approach objects. You adjust the triggering distance to a maximum of approx 3 feet. Includes mounting hardware and detailed instructions.
|
38287 AUTOPARK |
Keep On Rocking
Easy with our illuminated SPST rocker switch, rated for up to 6A at 125VAC or 10A at 250VAC. Snaps into a 1/2" x 1-1/8" panel bore. From Gardner-Bender®. Has pin-out diagram on the package. UL/CSA.
|
39168 ROCKER SWITCH |
Accu-Fish
For those on-boat bass-master disputes, a high-quality digital scale with a built-in tape measure. The unit itself is 3-15/16" x 2" x 15/16" thick with a sturdy, adjustable hanging bracket and a 7/8" ID hook, big enough for your larger fishies. It will weigh up 66 lbs (30kg) in 1-oz or 1-kg increments, with a backlit, 4-segment LCD screen that's 1-3/8" x 9/16". Has (10) memory slots to keep track of the catch, an integrated 37" (94cm) tape measure, and a digital Celsius thermometer. Runs on (2) lithium batteries, included. Also good for weighing children up to, say, second graders, if you can find something to hook onto.
|
93281 SPORT SCALE |
This One Hertz Our Ears
Our little solid-state buzzer is a diminutive 9/16" x 3/32" x 1-1/4" but it buzzes along at 8,000 hertz. Rated for 6VDC 20mA, but works fine with as little as 3V. Mounting brackets with holes on the back of the short sides, 4" wire leads. Lotta buzz for the buck.
|
92825 BUZZZZER |
Not Just For Phones Anymore
Need a little rechargeable NiMH Battery? This was originally for a NW Bell or Bell South cordless phone. Rated at 3.6VDC, 280mAH, it measures 1-1/2" x 1-3/8"x 3/8" with 2-1/2" of shrink-wrapped leads terminating in a 5.5mm 2-pin Molex connector.
|
36404 3.6 VDC BATTERY |
Takeout Hitachis
Clone motors –– almost. The 24 VDC Hitachi stepper motors (both of which are labeled with Kodak’s part number 315871) are almost identical. Each has 1:5 gearboxes, (3) Hall–effect sensors, and 12 steps per revolution (without the gearbox). The motor cases are 1–3/4” thick x 3–5/8” dia. The 2–1/2” sq x 15/16” thick gearboxes terminate in 1” x 3/8” dia flattened shafts with mounted plastic cams. Each has a set of (7) and a set of (3) leads with Molex–type connectors. The only difference between the takeout motors is that one draws 3 amps, and the other draws 2.4 amps. Sorry, folks, that’s all we know.
|
34589 2.4 AMP STEP MOTOR | |
|
34576 3.0 AMP STEP MOTOR |
Shop by Popular Tags
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »
