Express Shop!
Search Our Stuff
View Cart (0)
Sign In/Up! (It's Worth It!)
Home
/ Robot Partz
Image Viewing Preferences
You now have the option to view our web site with dazzling color photos or with our traditional hand-drawn line art. It’s a big decision, but don’t worry; you can always change your mind later. Choose your path below. Thanks! If you have a sciplus.com web account we can remember your changes. Sign in to your account or create an account.
The 36 Steps
This new 12VDC 1A stepper motor with 36 steps per revolution was for a printer, maybe. Or a scanner, maybe. Whichever, it's mounted on a 2-1/2" x 2" plate with a 3/4" long shaft with a 5/8" dia rubber wheel out one side and a 15-tooth, 2" dia plastic sprocket on the side with the leads. The (5) blue leads opposite the white go to 2.8 Ohm coils. Sorry, no wiring diagram available. Samsung P/N 02914900.
 |
40788 36-STEP MOTOR |
Blue Beat-Bulb
Nothing says boogie wagon like a blue light that plugs into the cigarette lighter and pulses to the beat of your music. This 6-3/4" long tube is a cold cathode fluorescent (looks like neon but is much tougher and draws less juice) with a 42" lead to an audio sensor and control box and a 58" lead to the tube itself. Has a steady-state setting if you get tired of boogying. Self-adhesive pads on the light and control box.
|
40417 AUTO BOOGIE LIGHT |
Double Your Motoring Pleasure
This little double-shafted reversible motor from Mabuchi (RK270SH) has hobby/science project written all over it. Nominally rated for 9VDC, it draws 20mA no load, stalls at 200mA and spins at approx 6300 rpm. Measures 1-1/4" long x 15/16" dia with 7/16" long x 1/16" dia shafts out of each end, the shaft on the terminal end being striated for 1/16" at the end.
|
41120 DOUBLE-SHAFT MABUCHI MOTOR |
Shrink-To-Fit
Like blue jeans, but for wires. So you can color-code those wires instead of getting all confused. You get a 10-pack of 12" long x 9/32" pieces of heat-shrink tubing, (3) each of white and red, (4) of black. Rated for up to 600V 125°C. UL.
|
93925 HEAT-SHRINK TUBES |
It All Hinges On This
You know you need these universal, standard, everyday always-useful zinc-plated steel cabinet hinges with removable pins from Stanley®. These are 2-1/2" wide x 1" with (3) mounting hole per side, and include (6) screws per hinge. You get (2) packages of (2), for a total of (4) hinges.
|
40510 STANLEY® STEEL HINGES |
This One Hertz Our Ears
Our little solid-state buzzer is a diminutive 9/16" x 3/32" x 1-1/4" but it buzzes along at 8,000 hertz. Rated for 6VDC 20mA, but works fine with as little as 3V. Mounting brackets with holes on the back of the short sides, 4" wire leads. Lotta buzz for the buck.
|
92825 BUZZZZER |
Takeout Hitachis
The 24 VDC Hitachi stepper motor is labeled with Kodak’s part number 315871. Each has 1:5 gearboxes, (3) Hall–effect sensors, and 12 steps per revolution (without the gearbox). The motor cases are 1–3/4” thick x 3–5/8” dia. The 2–1/2” sq x 15/16” thick gearboxes terminate in 1” x 3/8” dia flattened shafts with mounted plastic cams. Each has a set of (7) and a set of (3) leads with Molex–type connectors. The motor draws 2.4 amps. Sorry, folks, that’s all we know.
|
34589 2.4 AMP STEP MOTOR |
Gurneyteed To Roll
It's slim but a mighty good roller, like a swivel-plate caster on a hospital gurney. This one measures 5" dia x 1" wide, with a plastic wheel and smooth rubber tread. It has a 1/4" axle, 3-5/8" x 2-1-2" plate with (4) slotted 5/16" mounting holes and a foot brake. Ought to carry approx 200 lb. Don't forget to order the other three.
|
38859 SWIVELING CASTER |
Skateboard Bushed?
That's what these nylon bushings were made for, but they're suitable for anything that could use a little bushing. Small one is 15/16" dia x 7/16" thick with a 3/8" bore and a slight taper and very light striations on the wider face. The middle-sized measures 15/16" dia x 15/32" thick with a 3/8" bore and a slight taper. The largest is 1" dia x 17/32" thick with a 3/8" bore.
|
36271 LARGE BUSHING | |
|
36269 MEDIUM BUSHING | |
|
36270 SMALL BUSHING |
Mod Squad Alert
Green glows the technology. Or it does with this 11-3/8" long, green cold-cathode light tube. Draws approx 65mA at 12VDC and is designed run off your computer's power supply, but could also have automotive apps. Wiring harness has male connectors for power and ground plus (2) breakout connectors, a step-up transformer and a power switch. The lamp itself has adhesive tabs at each end for mounting, and a second output from the transformer lets you add another lamp for added green glowiness.
|
40792 GREEN CATHODE LAMP |
Sharp Speaker
Literally. This 6 watt, 6 ohm speaker is from Sharp Corporation. The speaker is 4-3/8" x 2" oblong with (4) mounting holes, a paper cone and a 1-7/8" dia voice coil.
|
39100 SHARP SPEAKERS |
Shop by Popular Tags
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »
