Express Shop!
Search Our Stuff
View Cart (0)
Sign In/Up! (It's Worth It!)
Home
/ Robot Partz
Image Viewing Preferences
You now have the option to view our web site with dazzling color photos or with our traditional hand-drawn line art. It’s a big decision, but don’t worry; you can always change your mind later. Choose your path below. Thanks! If you have a sciplus.com web account we can remember your changes. Sign in to your account or create an account.
Little Round Motor
This little 6VDC take-out was taken out of a cassette recorder. Measures 1-9/16" dia x 1-1/2" tall with a 5/16" x 1/16" dia shaft, draws 7mA no load and stalls at 120mA. Spins approx 250rpm and has a hard-wired cap so it's only clockwise unless you do some redemodificationing on it. Made in the USA.
 |
40154 250 RPM MOTOR |
Push Our Button
A push-button switch that stays pushed. This latching SPST pushbutton switch is rated for 6A at 125VAC or 3A at 250VAC. Has a 3/8" dia shank, mounting nuts, and 6" leads. From Gardner-Bender®. UL.
|
39166 PUSH BUTTON SWITCH |
Screw-Plus, That’s Us
Assorted hardware from Textron Logistics Company: Most of the screws are round-headed machine screws with matching nuts and combination slotted/Phillips heads. The screw eyes are all-steel. The wood screws are brass. The lock nuts have nylon inserts. The number of screws in each pack varies, but you’ll get (8) of the packs. We’ll let you do the multiplication.
| Description | Pack | |||
|---|---|---|---|---|
|
35334 1" SCREWS | 8-32 X 1" | 8 | |
|
35335 1-1/2" SCREWS | 8-32 x 1-1/2" | 6 | |
|
35333 3/4" SCREWS | 8-32 x 3/4" | 10 |
Bring In The Sheaves
This cutie from Mabuchi is a 12VDC reversible motor that spins at approx 2400 rpm, draws about 17mA no load, and stalls at 240mA. Measures 1-1/2" long x 1-1/16" dia with a removable sleeve. The 3/32" dia x 5/16" long shaft has a removable 5/16" dia single-sheave pulley. Has 9" leads with a 2-pin Molex connector.
|
40952 12VDC MABUCHI MOTOR & SHEAVE PULLEY |
Not Just For Phones Anymore
Need a little rechargeable NiMH Battery? This was originally for a NW Bell or Bell South cordless phone. Rated at 3.6VDC, 280mAH, it measures 1-1/2" x 1-3/8"x 3/8" with 2-1/2" of shrink-wrapped leads terminating in a 5.5mm 2-pin Molex connector.
|
36404 3.6 VDC BATTERY |
Blade, No Fan
So build your own (see "Motors"). Our white-plastic 4-blade fan (blade only) is 6" dia OA, with a 2" dia x 7/8" thick hub with a 3/16" bore. Made for a clockwise rotation. Not pristine, but not used, either. Made in the USA.
|
37433 FAN BLADE |
Memory Aid
Half way to the cabin for the weekend you fill with fear that you left the coffee pot on. Do you return? Call the neighbor with the spare key to check? Or hope and pray your mind is just acting up? Avoid the anguish over any 120 VAC device that runs on up to 10 amps. For such is the switching capacity of this automatic shut-off timer from a coffee maker. It can be programmed to turn on at any time of day within a single 24 hour cycle, and will automatically shut off (2) hours after turning on. Red LED's show on and the time programmed. We include a spec sheet with programming and hook up directions. 2-1/2" x 2-1/4" x 1-1/2" deep with a white plastic face.
|
30684 COFFEE TIMER |
Fused Harness
This wiring harness has (4) leads terminating in a Molex connector, including a 12-foot red/black, 18AWG pair with a 250V 3A in-line fuse, a 10-foot yellow 20AWG lead with a 250V 500mA fuse, and a 4-foot white 22AWG lead.
|
39383 FUSED HARNESS |
Kangaroo Rat
Another very small jumper. This jumper wire is only 3" long with brass screw terminals. The wire is 20 gauge stranded copper and the terminal are 3/16" OD, 1/8" ID.
|
39621 TINY JUMPER WIRE |
Battery Pack
Handyman special. The perfect battery holder to fit your project. The C-cell holder is an open-top white-plastic tray, 2-1/8" x 4-1/4", into which you snap (4) "C"s for 6V output. Attached with a short lead is a 1" square box with a 1/8" jack and a slide-switch to control the power.
|
38680 C CELL HOLDER |
The Old Switcheroo
An old standard from Gardner-Bender®. Their rotary switch is an SPTT (single pole triple throw) rated for up to 6A at 125VAC for both of the loads it can switch. Measures 1" x 7/8" x 3/8" with a 5/8" x 3/8" dia double flattened shaft. UL/CSA.
|
39054 ROTARY SWITCH |
Shop by Popular Tags
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »
