
Used to regulate flow through a flexible tube. The screw driven jaw can be accurately adjusted in any position from closed to fully open to allow you to get just the rate of flow you want. The swing-away bottom jaw design lets you install over already connected tubing. The jaw opens to a maximum of 7/8" high and is 15/16" wide. Made of nickel plated steel, all edges are rounded to avoid cutting the tubing.
![]() |
88189 CLAMP, SCREW |
Our name for this "beige box" which lets you hook up as many as (4) phones to (1) line when the phones have 4-line cords and the line terminates in a standard modular receptacle. Just plug the box into the modular receptacle, pry off the lid and wire in (1) to (4) phones (or lines) and fasten the box to the wall. The box is 4-1/4" x 2" x 1-1/8" thick and phone beige. Sounds like a way to get the phone, the fax, the computer and an extension all on to a single line??
![]() |
30055 PHONE SPLITTER |
Every 3/8" power drill's best friend. It has a black plastic cone that will fit over a standard chuck with the drill bit for a pilot hole still chucked in place. On the end of the cone is a steel tube with a tip to hold a standard 1/4" screwdriver bit. Leave the driver in the buddy and slip it on and off the chuck to change quickly and easily between drilling pilot holes and driving wood screws. That's what friends are for.
![]() |
32409 CHUCK/DRIVER ADAPTER |
Rubber stoppers for sinks, tubs and basins are tapered to provide a watertight seal. 3/4" metal ring for easy removal resists corrosion. Large stopper fits 1-3/4" dia drain. The Small stopper fits 1-1/2" drains.
![]() |
32465 LARGE STOPPERS | |
![]() |
32464 SMALL STOPPERS |
How many chucks would a key chuck key if a key chuck could key chucks. A key chuck would key...oh forget it. Buy this (4) headed key chuck and know you will have the right size for most popular chucks on tools from Delta, Black & Decker, Bosch and other manufacturers of portable and smaller stationary tools.
![]() |
91507 CHUCK KEYS |
Simple is good, and life don't come much simpler. This U-shaped 1-1/8" deep drawer pull/cabinet handle is molded cream-colored plastic. Matte finish, 3/8" dia, 3/16" unthreaded bores, 4" centers. Recycle a couple of screws from the old handle, 'cause we won't be sending you new ones. Simple.
![]() |
33397 DRAWER HANDLE |
Very pretty. Very graceful. These clear-glass 2.2 volt, .25 amp bulbs are a wavy, flame shape 1-1/2" tall and 5/8" dia at the widest point. The base is candelabra size. They work fine on 3 volts (2"AA") at .32 amps. For a special look, hook (50) up in series and use them at 120 VAC. Order extras, because we don't think you'll find little pretties like these at your local hardware store.
![]() |
33794 CANDELABRA BULBS |
Mini-clips (aka alligator clips) let you make your own low-voltage jumper leads, or repair broken leads on test equipment and chargers. The kit includes (2) 30 amp clips, (2) 25 amp clips, (2) 10 amp clips, (6) 2" clips and (6) 1-1/2" clips, all of which are insulated, plus (10) naked alligator clips.
![]() |
92074 CLIP KIT |
No large ones, but (101) amazingly assorted small extension, compression and torsion springs -- most, but not all, 1" to 2" long. Assorted lengths, assorted widths, assorted finishes, asorta handy bag of replacement parts to have around the house.
![]() |
92272 101 PIECE SPRING ASSORTMENT |
Hardware from Monkey Grip, Inc.? Those would be professional–quality tire repair products –– in this case, air–line couplers with a 1/4” NPT thread on one end and a fitting for a T–type connector on the other. The 1–1/2” long interchangeable steel nipples have T–connectors that are threaded. Excellent quality, whatever your application.
![]() |
34784 STEEL NIPPLES |
For those little surgical jobs: little forceps. Try these 3-1/2" long stainless steel straight forceps with 3/4" long striated jaws. Lock positions: "Tight" and "Yikes!"
![]() |
92457 SMALL FORCEPS |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »