
Nice little slide pot of the sort used for e.g. speaker volume control. Which is to say it is low wattage, probably under a half, but we don't know for sure. It has a 3/8" x 1-3/8" x 1/4" body with a 1/2" long constant resistance between the inside contacts, short between the outside, and 0-200 ohms variable between any inside and any outside contact. Circuit board mount. CTS SA 1315 8914.
![]() |
24210 SLIDE POT, 0-200 OHMS |
Syon(tm)"Lubit-8" oil with teflon for small jobs like power tools, sewing machines, fishing tackle, locks and toys. Comes in a pen like tube with needle point applicator built in for drop-at-a-time precision. Great stuff in the slippery department and handles temperature extremes, -70°F to +200°F, with ease. As they say, "One drop does the job."
![]() |
89306 SUPER OIL W/ TEFLON |
A really small guy who lives....Whoops! Wrong Chuck. This one is a drill or rotary tool chuck with a 1/8" shank and fits bit sizes #60-#80 to facilitate handling tools with truly small shanks. Very handy in the modeling and electronics worlds.
![]() |
89759 MICRO CHUCK |
Our name for this "beige box" which lets you hook up as many as (4) phones to (1) line when the phones have 4-line cords and the line terminates in a standard modular receptacle. Just plug the box into the modular receptacle, pry off the lid and wire in (1) to (4) phones (or lines) and fasten the box to the wall. The box is 4-1/4" x 2" x 1-1/8" thick and phone beige. Sounds like a way to get the phone, the fax, the computer and an extension all on to a single line??
![]() |
30055 PHONE SPLITTER |
We have hundreds of thousands of 1/4 watt resistors which we will send an assortment of (100) 1/4 watt resistors of at least (10) different ohm ratings. All have two axial leads, and 5% tolerance. Don't miss out! This is to cheep to pass up.
![]() |
21970 ASSORTED RESISTORS |
Nuclear physicists speak of five fundamental forces: weak, strong, electromagnetic, gravity, and duct tape. Sizes and colors of duct tape come and go in the world of surplus –– right now, we have 2" wide by 60 yd. long rolls on 3” cores, all select seconds or better. We offer you a standard grey color.
![]() |
23109 2" GREY DUCT TAPE |
Diamond point bits that, if used by your dentist would send you through the roof. The assortment of bits includes cylinders, cones (points), balls and a couple of special shapes all in a variety of sizes. In the set of (20), each has 3/32" dia. shank and is about 2-3/4" long OA. In the set of (10), each has a 1/8" dia. shank and is about 1-3/4" long OA, with larger size bit heads. Both come in plastic cases. A craftsperson's delight!!
![]() |
91246 DIAMOND POINTS, SET (10) | |
![]() |
89137 DIAMOND POINTS, SET(20) |
Just a basic common phone line. 25 feet long, flat, 4-wire, ivory casing. Nothing at the ends: you attach the modular plugs, spade plugs, or incorporate it into your imaginative electrical contraptions. We'll keep the price basic, too.
![]() |
29374 PLAIN PHONE CORD |
We have a number of battery holders, constantly changing in detail. They may be plastic, they may be metal. They all have either simple short wire leads or connection points. In all cases, they hold a number of batteries and connect them internally in series. The table shows the number and type of batteries held, the final voltage, material, lead type and price.
| No. | Type | ||||
|---|---|---|---|---|---|
![]() |
21337 BATTERY SNAP W/LEADS | (1) | 9 Volt | Details | |
![]() |
93221 BLUE SINGLE D CELL HOLDER | (1) | D | Details | |
![]() |
35065 HOLDER, 1 "N" | (1) | "N" | Details | |
![]() |
92475 HOLDER, 1-AA | (1) | "AA" | Details | |
![]() |
92476 HOLDER, 2-AA | (2) | "AA" | Details | |
![]() |
92477 HOLDER, 3-AA | (3) | "AA" | Details | |
![]() |
93190 HOLDER, 4-AA | (4) | "AA" | Details |
How many chucks would a key chuck key if a key chuck could key chucks. A key chuck would key...oh forget it. Buy this (4) headed key chuck and know you will have the right size for most popular chucks on tools from Delta, Black & Decker, Bosch and other manufacturers of portable and smaller stationary tools.
![]() |
91507 CHUCK KEYS |
A set of (5) needle files, 5-1/2" long, which are coated with industrial diamonds. Perfect for sharpening tools, or doing filing on hard metals etc. when you are sculpting or welding. The shapes are the usual assortment of flat, round and in between shapes.
![]() |
89397 DIAMOND FILES |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »