
Make your own custom clock in a tick with this quartz movement. It's in a 2-3/16" square x 5/8" thick black-plastic case with a built-in hook for hanging it. Comes with minimalistic hour, minute and second hands, the latter (2) of which will extend 2" from the clock's center. You supply (1) "AA" battery and the clock face.
![]() |
92307 CLOCK MOVEMENT |
AKA wax carvers. Each tool is about 6" long, stainless steel, with a shaped head on each end. Set "B" has two smaller arrow heads, two sort of like golf clubs and two more small (1/8"+) "spoons". The smaller sizes mean slightly sharper edges and points, but they are still basically dull. You certainly could use them to model in wax, or in clay, or to sculpt plaster of Paris. Handy and unusual.
![]() |
89330 SCULPTING TOOLS, SET B |
For those little surgical jobs: little forceps. Try these 3-1/2" long stainless steel straight forceps with 3/4" long striated jaws. Lock positions: "Tight" and "Yikes!"
![]() |
92457 SMALL FORCEPS |
They call it the "Krazy Cutter" and it's going to make your life a whole bunch easier. It's a little 2-3/8" long x 3/16" thick teardrop-shaped paper slicer with a teensy rust- and dullness-proof ceramic blade that magically cuts through paper and plastic. Perfect for clipping newsprint, cutting wrapping paper, and opening deviously sealed packaging, including the heavy stuff if you press a bit. Even CD cases. The krazy part? Won't cut your fingers or anything else. You could run it right over your hand, press down and everything, and nothing. Really. We tried it on some expendable employees. You know what this means? You can take it on airplanes, which further means that when you get to the coast you'll actually be able to open all the packages full of the stuff you sent ahead.
![]() |
92855 KRAZY CUTTER CERAMIC BLADE CUTTING TOOL |
You say you don't need your foot pumped up? How about your beach ball? Bicycle tire? Air mattress? Attach the quick-connect valve head of the pump and tromp away on the foot pedal. The heavy-duty metal pump has a high-pressure hydraulic air chamber, 100 psi pressure gauge, 24" air hose, and non-slip rubber feet. Comes with (1) universal valve adapter (Attached.) and (1) tapered nozzle. (Inflation needle not included.)
![]() |
15401 FOOT PUMP |
The ultimate in refrigerator-door decorating: a 25-foot x 3/4" wide roll of dark brown magnetic tape in a handy dispenser with a tear-off bar. Rip off a strip of tape, stick the sticky side to a photo, art project, or note and the magnetic side will hold it on a refrigerator door, file cabinet, or any other steel surface. Light duty, like all fridge magnets, so stick to notes and pix and other fluff.
![]() |
93059 MAGNET TAPE |
It's stylish, it's handy, it has a slightly menacing look to it, and-truth be told-it's a lot of fun. It's a handheld butane torch, great for everyone: in the lab, under the hood, working with circuitry, heck, a chef can even use it to flambé the dessert. 6-1/4" tall, 3-5/8" x 2-1/4" dia base, 3-5/8" long at the top, with a textured grip, push-button start with safety, and air adjustment to control the size of the flame. Easy to fill with butane, which you'll need to do 'cause no fuel is included.
![]() |
27439 BUTANE TORCH |
A bright, green glow stick for guys with big paws. Who are either at a really good concert, or stalled on a dark road. A full 15" long x 3/4" dia, it has a plastic loop and a festive red hang-cord on one end. They'll see you coming or (if you're stalled) not coming, for up to (12) hours, the packaging says.
![]() |
93198 JUMBO GLOW STICK |
Or sort-of-locking. Push the plunger down and they lock in place, but push the 1/8" nipple down on a hard surface and they'll unlock for re-use. Handy in the shop or craft room for oil, grease, paints, and glues. (Also quite useful for getting liquid medication into the dog.) They measure 3-1/2" long x 9/16" dia and hold 5ml, are graduated in .2ml increments, and have threaded tops. Note the throwaway price.
![]() |
37664 LOCKING SYRINGE |
This clever little artist's brush holder/cleaner will keep those oil or watercolor brushes standing up (or down) straight with their little heads under water or paint thinner, clean and un-bent until you need them. A 4" dia x 2" deep aluminum cup is topped by a 6" tall U-shaped handle with a brush-holding spring across the top. Inside the cup is a mesh screen (with its own handle) for to clean the paint off and let it settle to the bottom, away from the bristles. The handle is removable for storage or travel.
![]() |
93264 BRUSH WASHER |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »