Express Shop!
Search Our Stuff
View Cart (0)
Sign In/Up! (It's Worth It!)
Home
/ Items tagged "Motor"
Timing Motors
These are really geared reduction motors, but much smaller and of lower power. Often used to operate cams and switches in electrical circuits, or to drive displays, they can generally be operated in continuous applications if not heavily loaded. Most are about 2" dia. x 1-1/2" thick. Remember CW means “Clockwise” and CCW “Counter–clockwise,” looking at the shaft.
| RPM | ROTATE | ||||
|---|---|---|---|---|---|
 |
33915 230VAC TIMING MOTOR, 2 RPM | 2 | CCW | Details | |
|
30736 9VAC TIMING MOTOR, 2/3 RPM | 2/3 | CW | Details |
Capacitors-No PCB'S
We have a bunch of can capacitors of the type needed to start many motors and blowers - or do other things. Check the table and see if we have what you need.
| Rating | Manu/Part No. | |||
|---|---|---|---|---|
|
26089 CAPACITOR, 2.03 MFD | 570 VAC, 60 Hz | GE/21L219R |
Small Is Beautiful
And this little 6-12VDC new gear motor is a stunner. Made for a telescope drive, it draws approx 100mA and spins approx 5 rpm at 12VDC. Has a 5/16" dia, 16-tooth sprocket on a 5/8" long shaft and is 2-7/16" x 1-7/8" x 2-5/8" OA. The gearbox ratio is approx 100:1. Has a short (3") 2-pin jumper for power and the stall current at 12VDC is 2A.
|
92651 6-12V GEAR MOTOR |
Popular Tags:
alteredbit
gear
motors
|
Add Tag 
Tough Gear Motor
Small but durable. Measures 1-1/2" long (including the terminals) x 1-1/16" dia, with a removable, 1-1/4" dia x 1-1/8" long gearbox and 3/16" x 3/8" long flattened offset shaft. Runs between 6-12 VDC. At 12 VDC, it spins 7 rpm and draws 90mA. Gearbox ratio is approx 400:1. Has (3) 3/32" mounting holes on the shaft face. Reversible.
|
37739 12VDC GEAR MOTOR |
Popular Tags:
Robotic
alteredbit
Cart
|
Add Tag
10,000 RPM
Brand new (made for a kiddy car ride with a big gear-box), this reversible 6-12VDC Johnson motor (#141292 and 169324) draws 1.4A and spins 10,000 rpms at 12VDC. Measures 2-1/2" long x 1-1/2" dia with a 1/8" dia x 3/8" long striated shaft. Has (2) tabs on the back for hook-up and (2) mounting holes on the face.
|
37518 10,000 RPM MOTOR |
Gear Motor
Open, close or move whatever with this mighty little 3-12VDC 4RPM gear motor designed to operate a vent in a Chrysler product. Draws just 15mA no-load and stalls at 200mA. Output is via a 1/2" dia x 1/2" long sprocketed shaft. The case measures a diminutive 4-1/8" x 3-1/4" x 1" thick with (3) arms with 1/4" mounting holes. No leads, but the gearbox pops open to get into it and there are (2) terminal clips that hit the motor.
|
37244 12 VOLT GEAR MOTOR |
Gear Motor
Attention robotics boffins: Here's a nice, powerful 12-24VDC Mabuchi brush motor with a gearbox and pulley attached. At its nominal 24DC, it spins 12rpm, draws 50mA no load, and stalls a 750mA. Has a 3/4" long x 5/16" flattened shaft with a 4-5/8" dia x 5/16" wide (3/16" ID) single-sheave pulley attached, with a matching O-ring. The gearbox measures 2-3/4" x 3" x 9-1/16". The motor measures 1-1/16"dia x 1-5/8" long and comes with 7" leads and a 2-pin Molex connector.
|
37837 MOTOR W/PULLEY |
Shop by Popular Tags
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »
