
Here's a set of (5) tiny embedded-diamond files, just in case you have some tiny embedded diamonds that need filing. They are 3-1/8" long OA, with rubber handles. The file portions are 1 mm to 2 mm wide, with assorted pointed-round, pointed-flat, and blunt-flat tips at 150 grit.
![]() |
92332 DIAMOND FILES |
They call it the "Krazy Cutter" and it's going to make your life a whole bunch easier. It's a little 2-3/8" long x 3/16" thick teardrop-shaped paper slicer with a teensy rust- and dullness-proof ceramic blade that magically cuts through paper and plastic. Perfect for clipping newsprint, cutting wrapping paper, and opening deviously sealed packaging, including the heavy stuff if you press a bit. Even CD cases. The krazy part? Won't cut your fingers or anything else. You could run it right over your hand, press down and everything, and nothing. Really. We tried it on some expendable employees. You know what this means? You can take it on airplanes, which further means that when you get to the coast you'll actually be able to open all the packages full of the stuff you sent ahead.
![]() |
92855 KRAZY CUTTER CERAMIC BLADE CUTTING TOOL |
Our delovely desoldering device is de spring-loaded suction type, 10-3/4" long. Depress de pump, heat de circuit board pad, squeeze de button, and de solder deesappears. Devious little devil.
![]() |
92812 DESOLDERING PUMP |
Originally intended for hospital use (Think Nurse Cratchit. Think cold, wet sponge baths.), these 12” x 9–1/2” x 4–1/4” deep washbasins have rounded ends and flat lips. The #5 plastic is that wonderful institutional–yellow color. But they’re indestructible, short of melting them, and they nest when not in use. Use them to store your craft supplies, the kid’s action figures, the cat’s squeeze toys. Or take up nursing.
![]() |
91728 YELLOW WASHBASIN |
WARNING: CHOKING HAZARD-Small Parts. Not for children under 3 yrs.
Or gear down-for the science fair or for any number of hobby projects. This hard-to-find set of (3) combination spur/beveled gears-for when you want gears set either straight or at 90° to one another-also has one small spur gear, plus three bushings. All in red, green, or blue plastic (we'll pick). The combo-beveled gears are 1-5/8", 1-1/4" and 27/32" dia with 3/16" bores to accept the bushings, which are 3/16" OD, 3/32" ID. The straight gear is 17/32" dia with a 1/16" half-bore. All are 24 pitch.
![]() |
92657P1 GEAR SET | |
![]() |
92657P10 GEAR SET (10) PACK SAVINGS | |
![]() |
92657P30 GEAR SET CLASSROOM PACK SAVINGS |
That's what it says on the label, but we don't get it either. We think it's just good quality nylon cord at a bargain. We offer a package of (4) spools (with 1-1/2" long spindles), each with 25 feet of .015" thick, 27-lb test nylon cord. Don't feel obligated to retrieve bait with it.
![]() |
37034 NYLON LINE |
Wanna make your own leather clothes? Start with this 3-piece leather punch set with (2) eyelet punches, 4mm and 9mm, plus a rotary leather punch that makes 2, 2.5, 3, 3.5, 4, and 4.5mm holes. Comes complete with a couple of dozen eyelets for the 4mm and 9mm holes. When you're done, lend them to the old man to let out that belt of his.
![]() |
92967 LEATHER PUNCH SET |
It's stylish, it's handy, it has a slightly menacing look to it, and-truth be told-it's a lot of fun. It's a handheld butane torch, great for everyone: in the lab, under the hood, working with circuitry, heck, a chef can even use it to flambé the dessert. 6-1/4" tall, 3-5/8" x 2-1/4" dia base, 3-5/8" long at the top, with a textured grip, push-button start with safety, and air adjustment to control the size of the flame. Easy to fill with butane, which you'll need to do 'cause no fuel is included.
![]() |
27439 BUTANE TORCH |
You certainly could, but these oversized pipe cleaners are actually indispensable craft items. Our each is a pack of (100) 12" long x 1/4" dia chenilles in a dozen assorted colors, including some neons.
![]() |
93084 JUMBO CHENILLE |
And we did it ourselves with this handy self-healing cutting mat. The hard rubber cutting mat is self-healing and no, we don't know how it does that. It's 11-3/4" x 8-3/4" x 1/8" thick, marked with 1/8" and 5mm increments and 1/2" squares, and lines for 45° and 60° cuts.
![]() |
93121 CUTTING MAT |
When you could just order this 480-pack of 1/4 watt, 5%-tolerance resistors. You'll get (30) pieces each of 10, 22, 47, 100, 220, 470, 1K, 2.2K, 4.7K, 10K, 22K, 47K, 100K, 220K, 470K, and 1M OHM.
![]() |
93191 480 RESISTORS |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »