
Penciltype soldering iron imported from Taiwan. Overlook the charming instructions, it works just the way everyone does. 30 watt 110 volt, nice, serviceable unit.
![]() |
88242 SOLDERING IRON |
Our black-vinyl heat-shrink tubing is 1/4" dia, already cut into 2" lengths, and shrinks to half its diameter. The tubing is marked "fuse link 20 ga." You'll get a package of (20) tubes.
![]() |
15500 HEAT SHRINK TUBING |
Keep small knives and tools sharp. The sharpening stones in our 2–pc set include (1) large 6” x 13/16” x 3/8” and (1) slim 4” x 3/8” x 1/10”, both labeled 320 grit. The stones in our 3–pc set are all 4” long x 1/4” square. We know they have (3) different surfaces, but we haven’t a clue to their true grit.
![]() |
31793 WHET STONES, 2 |
You already have a big locking pliers -- now you're looking for a smaller one. We have just what you need. This one is small enough to throw in the glove compartment or a kitchen drawer, but perfectly functional. It's drop-forged steel, only 4-1/4" long, with round jaws that open approx 1/2". Order one for the house and one for the car!
![]() |
92203 MINI PLIERS |
Newspapers and telephone books just got easier to read. Lay the 4" x 1" magnifying acrylic bar flat on the print for a 2X magnification. Switch on the flashlight that's part of the handle, and light the print. The device is 9-1/2" long when extended, 5" long when the retractable bar is folded into the black-plastic handle.
![]() |
35193 MAGNIFYING BAR |
AKA wax carvers. Each tool is about 6" long, stainless steel, with a shaped head on each end. Set "B" has two smaller arrow heads, two sort of like golf clubs and two more small (1/8"+) "spoons". The smaller sizes mean slightly sharper edges and points, but they are still basically dull. You certainly could use them to model in wax, or in clay, or to sculpt plaster of Paris. Handy and unusual.
![]() |
89330 SCULPTING TOOLS, SET B |
The size of a pen when retracted, this telescoping pickup tool has a 1/2" dia magnet on the business end, and a pocket clip on the other end. The 5-3/8" long gold- and silver-colored version extends to 27 -3/4" OA and has an 8-lb pull. The 4 -3/8" long type with the black case extends to only 22" OA and has only a 5-lb pull, but the wand's last 2 -1/2" is a flexible spring - and being able to bend around a corner can make up for being a few inches shorter.
![]() |
91300 EXTENDIBLE MAG PICK UP |
Stretchy, off-white knit, one-size-fits-all, non-slip work gloves. Both sides are covered with little black-vinyl dots for universal maxigripabilityness, and they're designed to fit either hand. Wrist to fingertips they're 9-1/2" long. Toss a bunch in the tool box and trunk.
![]() |
36126 GRIPPY GLOVES |
A variety of heat shrink tubing pieces. You get (10) pieces, each (1) foot long for a small price. Size Small means each piece will be at least 1/16” but not over 1/4” OD before shrinking, and about one half that after shrinking. Large diameters will range from 1/4” to 1-1/2”. Each may be red, black white, yellow or who knows what color. Snip them into smaller bits. Use them end to end for longer pieces. You can’t go wrong with this deal!!
![]() |
26041 HEAT SHRINK TUBE, LG | |
![]() |
22776 HEAT SHRINK TUBE, SM |
When you need that print to be just a tad bigger and brighter, whip out your light-up, fold-out acrylic bar magnifier. The 4" long x 1-1/8" wide x 5/8" thick convex bar swings out of a 5" long black plastic case, lies flat, and magnifies approx 2X. Runs on 2 "AAA" batteries (not included) and is lit by a replaceable flashlight bulb (included). Just the right size, by the way, for a column of newsprint.
![]() |
36743 MAGNIFIER W/LIGHT |
Because you'll never need another one. Just clean out all the loose and lost parts in the bottom of the toolbox and replace them with this 45-piece set. The folding, zippered case holds a hex key/Allen wrench set with wrenches at 1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 8, AND 10mm; an SAE FOLDING SET with 7/32", 3/16", 5/32", 1/8", 3/32", 5/64", 1/16", 1/4", 5/16", and 3/8", along with loose wrenches in all the same sizes, plus 7mm and 4.5mm; loose SAE at 1/20"; and a second star wrench at 9/64". All the tools slot into size-marked keepers inside the case. Made of heat-treated, black oxide carbon steel for Omaha Industrial Tools, and all for less than the price of a medium pizza.
![]() |
93003 HEX KEY SET |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »