
White plastic swiveling feet for 1" dia furniture legs. We suggest that they might also serve as pedestals for small kinetic sculptures. 1-1/8" high overall, they appear to add about 3/8" to the height of your table, chair or stabile.
![]() |
27231 FURNITURE FEET |
No large ones, but (101) amazingly assorted small extension, compression and torsion springs -- most, but not all, 1" to 2" long. Assorted lengths, assorted widths, assorted finishes, asorta handy bag of replacement parts to have around the house.
![]() |
92272 101 PIECE SPRING ASSORTMENT |
A strangely clever device that allows you to take a hanging plant or light fixture and swag it up to 12 inches away in any direction. Also adjusts the height, of course. Lets you put plants into or out of the sun, move a light over or away from a table. Easy to use, and just as easy to remove, with no screws or damage. It's white-enameled metal, 1/4" dia x 17-5/8" long with rubber feet where it touches the ceiling. Supports 8 lbs at a distance of 12".
![]() |
38979 SWAG IT |
Sounds like a 60s rock group, but it's actually a 5" dia reflective silver safety flasher with a 4" red triangle inside. Has 77 small red LEDs in the triangle and a larger one in the center. Can be set to either flash or to oscillate between them. It has a magnet embedded in the back, a small fold-out hook, and a separate 3" tall easel with a magnet and a piece of steel to hold it upright. It's a big emergency warning alert in a small package, that could save your life!. You add (3) "AAA" batteries.
![]() |
93670 SAFETY LIGHT |
The secret is ceramics. This 5-1/2" long precision cutter has a ceramic point that's as sharp as an X-actly knife, stays sharp longer, is easier to maneuver in intricate cutting patterns, and is nearly impossible to cut yourself with. Cuts paper and card stock easily. Pencil-style, with a cap. A boon for crafters, and a blessing for junior crafters.
![]() |
93796 PRECISION CERAMIC BLADE CUTTER |
Warm those chilly boots before you go out into the storm. These (2) electric warmers are 5-1/2" x 1-1/2" oval plastic pods with red glow-plugs in them. They're on a 77" cord, with a 39" cord between pods, and heat up to a toasty 100°F. The little heaters use 8.5 watts, 120V and have a reversible thermal fuse so your boots can be toasty, without being toast. (If you've already been out in the storm, don't use these if the insides of your boots are wet.)
![]() |
39630 BOOT WARMERS |
Or the light will come on! Now your hallways at home can be just like a European hotel with our motion-sensitive LED light. No plug necessary, since it runs on (3) "AA" batteries (not included because we can't do everything, after all). Mounts via a 1/4" keyed screw hole, but double-sided tape would also work. Measures 2-3/8" sq x 1-1/2" thick and has (10) white LEDs in a white plastic housing. Lights up with motion approx 4 feet away.
![]() |
93880 MOTION LIGHT |
Our thinner picker-upper, but with a powerful 5-lb-pull, 9/16" dia magnet on the business end (for spilled nails, the screw that rolled under the stove, or the heavy wrench you dropped into the sump). The 5/16" dia x 5-1/4" long 4-draw barrel extends to a full two feet. Has a convenient pocket clip.
![]() |
93985 SKINNY PICKER-UPPER |
A pair of replacement wheels for the front legs of Gram's aluminum walker. (Or her Zimmer frame, if she's a Brit.) The 3" dia wheels fit most walkers, are already mounted on 1" ID extension legs that are 9-5/8" long and have (8) holes for adjusting the length to fit the height of the rear legs. If Gram's getting around just fine, maybe she needs new wheels on her shopping cart. Or on a stroller for one of the grandkids.
![]() |
39803 WALKER WHEELS |
Create a grommet without cutting a hole in the tarp, and remove it when you're done. With the Tarp Grip-Tie", you place a 1-11/16" dia disc under the tarp, then stretch the teardrop-shaped bracket over the disc and tarp fabric. The bracket has a 1/2" eyelet at the thin end for attaching rope or bungee cord tie-downs, but you can also use it to connect two tarps. Each plastic Grip-Tie measures 3-1/2" long x 1-7/8" at its widest. Our each is a package of (4).
![]() |
39894 TARP GRIP-TIE |
$2.95
EACH
Out of Stock. Check Back Soon! |
This achromatic doublet lens (them what won't distort color or shape any more than they absolutely have to) is in an oval metal mount with a small mounting hole opposite a set of prongs. Originally a projector lens of some sort, it measures 20mm dia (approx 3/4") with a 47mm (approx 1-7/8") focal length. Despite the fact that you could mount it in its current mounting using the mounting hole, we suspect you're just going to use it as a nice 5X loupe.
![]() |
68023 ACHROMATIC LENS |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »