Express Shop!
Search Our Stuff
View Cart (0)
Sign In/Up! (It's Worth It!)
Home
/ Items tagged "diggem"
Image Viewing Preferences
You now have the option to view our web site with dazzling color photos or with our traditional hand-drawn line art. It’s a big decision, but don’t worry; you can always change your mind later. Choose your path below. Thanks! If you have a sciplus.com web account we can remember your changes. Sign in to your account or create an account.
Screw Compressor Clamp
Used to regulate flow through a flexible tube. The screw driven jaw can be accurately adjusted in any position from closed to fully open to allow you to get just the rate of flow you want. The swing-away bottom jaw design lets you install over already connected tubing. The jaw opens to a maximum of 7/8" high and is 15/16" wide. Made of nickel plated steel, all edges are rounded to avoid cutting the tubing.
 |
88189 CLAMP, SCREW |
Back-To-Back Bulbs
Get twice the light. The (2) sockets for standard incandescent bulbs have crimp terminals with jumper leads. (Use 18-gauge wire.) The single steel bracket between them has (1) 3/8" threaded mounting hole in the center. Picture an older ceiling fixture, or a light above a medicine cabinet. They are rated at 250 volts, 660 watts each. The double socket is 4-1/4" x 1-1/4" dia OA. UL/CSA listed
|
34282 DOUBLE SOCKET |
Good Tweezers
This set of (6) tweezers is as useful as it looks daunting. The (6) stainless steel tweezers vary in size from 4-1/2" up to 7". Two of the tweezers have serated tips one is inverse, one has a slide latch and the others are straight flat tip. The set comes in a clear front plastic carrying case. Good for model cars, planes or hard to reach splinters.
|
88366 STAINLESS TWEEZERS SET |
Wanna Toggle?
The correct answer is "I don't know; I've never toggled." If, however, you just want to turn something on and off, here's a choice of toggles for your switching delectation. The DPDT toggle is rated for up to 20A at 125VAC and has screw terminals below. Measures 1-1/4" x 1-3/4". No center-off position. The first DPST toggle is rated for 20A at 125VAC or 15A at 250VAC. Screw terminals on the bottom. Measures 1-5/16" x 3/4". The smaller DPST toggle is rated for up to 4A at 125VAC or 2A at 250VAC. Has 3/16" spade terminals on the bottom and measures 1" X 9/16". All the toggles come with switch-plates and mounting nuts.
|
38715 DPDT TOGGLE 20A (A) | |
|
38716 DPST TOGGLE 20A (B) | |
|
38717 DPST TOGGLE 4A (C) |
Popular Tags:
maxamillion10
wiw
airboat
|
Add Tag 
Square Deal
Nice small carpenter's square for the toolbox. In black steel with easy-read white markings up to 8" (202mm) and 12" (302mm). Graduated in 1/16" increments on one side, 1mm increments on the reverse.
|
93639 STEEL SQUARE |
The Old Switcheroo
An old standard from Gardner-Bender®. Their rotary switch is an SPTT (single pole triple throw) rated for up to 6A at 125VAC for both of the loads it can switch. Measures 1" x 7/8" x 3/8" with a 5/8" x 3/8" dia double flattened shaft. UL/CSA.
|
39054 ROTARY SWITCH |
Popular Tags:
CeilingFan
Metro_Coyotes_WishList
zappenfusen
|
Add Tag
Need A Hand With That?
You've come to the right place. Our illuminated, magnifying helping hand even has a stand to hold a soldering iron. On a 2-1/4" x 2-1/2" cast iron base with a small-parts well, it has a sliding arm on a ball-joint with (2) alligator clips that move on (2) axes. On a second rotating ball-joint arm is a generous 3-14" dia 2X magnifier with a 6X inset lens and a pair of white LEDS. More like (3) helping hands than (1).
|
93707 LIGHTED HELPER |
Some Constrictions Apply
This small chrome constricting clamp is designed for controlling IV drips, but no doubt will inspire other uses for crafters, jewelry makers and those who want to control the flow from small pumps. Measure 2" x 1-1/4" OA when fully open. Flat clamp screws open to approx 5/8". The clamping surface is approx 3/4" x 1/4".
|
12044 CHROME "C" CLAMP |
Bulbs For Eco-Hipsters
Who says you can’t boogie to blacklight and save the planet at the same time? This standard-base compact fluorescent bulb is a blacklight rated for 8,000 hours of use. It’s short and curly, 5” tall including the threads (4” tall when installed) and uses 13 watts to illuminate at the equivalent of a 60-watt incandescent.
|
93812 ECO BLACKLIGHT |
Popular Tags:
ACPIIPROJECT
PTsDesire
ctw
|
Add Tag
Flexibility Is Everything
Our 12" long steel driver is nothing if not flexible, bending a full 90°, and it drives everything but Miss Daisy. Driver set comes with (30) 1/4" bits, including a range of Phillips, slotted, torx, hex and square bits and (10) sockets, plus a square-to-hex adaptor.
|
94083 FLEXIBLE DRIVER SET |
Feeling A Little Pressure?
This easy-to-read pressure gauge registers up to 30psi in .25psi increments. Measures 2" dia x 1" thick, screwed and glued into a 1-1/8" hex x 2-1/8" long chromed steel fitting with a 3/4" FPT port on one end and a Schrader valve with cap on the other. A person could separate the gauge from the fitting if so moved.
|
40288 30 PSI PRESSURE GAUGE |
Shop by Popular Tags
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »
