
Rejoice, we have finally found a source of reasonably priced borosilicate lab glassware. This is the kind of glass in the trade marked Pyrex(tm) and Kimax(tm) labware. The stuff you can put right over the flame of the Bunsen burner, or directly onto the hot plate. This stuff is imported from China, and is considered student grade, which is good enough for anything but the most exotic applications. We have beakers, test tubes, graduated cylinders and flasks. Compare the prices below and you will see that they are around half the U.S. equivalent. Call us for larger quantity prices.
![]() |
88987 BEAKER, 1000ML | |
![]() |
92611 BEAKER, 2000ML | |
![]() |
88985 BEAKER, 250ML | |
![]() |
88984 BEAKER, 50ML | |
![]() |
88986 BEAKER, 600ML | |
![]() |
88993 ERLEN FLASK, 500ML | |
![]() |
88992 ERLEN. FLASK, 250ML | |
![]() |
88991 ERLEN. FLASK, 50 ML | |
![]() |
88989 GRADUATED CYL. 100ML | |
![]() |
88988 GRADUATED CYL. 10ML | |
![]() |
88990 GRADUATED CYL. 250ML | |
![]() |
88995 TEST TUBE, 13X100MM | |
![]() |
88996 TEST TUBE, 16X150MM | |
![]() |
88997 TEST TUBE, 20X150MM | |
![]() |
92614 TEST TUBE, 25X150MM |
We have obtained a large number of real natural corks, mostly surplus with a few fill-ins bought commercially. They range across the popular sizes used in science labs to seal vessels (drill your own holes for glass tubing, etc) and to use as floats. Or just use them to seal bottles that don't have closures or cry out for a decorative seal.
| Top Dia. | Bottom Dia. | ||||
|---|---|---|---|---|---|
![]() |
92688 CORK #0 | 3/8" | 9/32" | Details | |
![]() |
88746 CORK, #00 | 5/16" | 7/32" | Details | |
![]() |
92718 CORK, #1 | 7/16" | 5/16" | Details | |
![]() |
89230 CORK, #10 | 1" | 3/4" | Details | |
![]() |
89232 CORK, #16 | 1-3/8" | 1-1/16" | Details | |
![]() |
1711 CORK, #2 | 1/2" | 7/16 | Details | |
![]() |
89234 CORK, #20 | 1-5/8 | 1-5/16" | Details | |
![]() |
88748 CORK, #3 | 9/16" | 7/16" | Details | |
![]() |
23594 CORK, #5 | 11/16" | 9/16" | Details |
Affordable, adaptable lab equipment for serious scientists with laughable budgets. The basic stand is heavy black metal 8" long x 5" wide x 1" high with a 19-1/2" x 3/8" dia support rod screwed into it. Position a beaker or bunsen burner on the stand and build the configuration you need above it. Both of the Burette clamps and the ring attach to the rod with thumbscrew clamps. The Burette clamps have wing nuts so they can be adjusted to any angle. The single clamp extends 4" from the rod, with rounded, uncoated, adjustable metal jaws with spring tension and a wing nut. The double clamp like it has rubber-coated jaws. The 3" metal support ring holds the 6" x 6" heavy-gauge steel-mesh burner screen with crimped edges. Nice, solid equipment at a rare price.
![]() |
88192 3" SUPPORT RING | |
![]() |
91831 6" X 6" SCREEN | |
![]() |
88597 DOUBLE CLAMP |
$13.95
EACH
Out of Stock. Check Back Soon! |
![]() |
88195 LAB STAND | |
![]() |
88186 SINGLE CLAMP |
This funnel looks delicate, but it's Pyrex® so heat won't hurt it. The tough little glass funnel has a 75mm (approx 3") ID mouth and an 80mm long neck with a 6mm ID fluted outlet. No markings.
![]() |
92613 GLASS FUNNEL |
Getting tired of buying them and trimming them and losing them? Get rid of wicks altogether with this nifty little alcohol burner with a copper capillary tube in place of a cotton wick. Burns 90ml of denatured alcohol and comes with a heat shield (packed inside the reservoir) and a burner cap. Don't forget to remove the little rubber plug - it's there to cover the holes in the copper tube when not in use. And this is lab equipment, so resist the temptation to use it under a chafing dish; initially, it flares up a tad more than is good for Swedish meatballs.
![]() |
92924 WICKLESS BURNER |
So we're pricing these borosilicate boiling flasks to move quickly. We've got (3) sizes, all with slightly flattened bottoms, each with a single, discreet, capacity mark in white. While the actual physical size can vary slightly, the volume remains the same. The 1000ml flask is 9-5/8" tall OA x 5-5/8" dia with a 1-5/16" ID mouth, and a lip. Takes a #7 rubber stopper. The 500ml flask is 6-7/8" tall OA x 4-1/8" dia with a 1-3/16" ID mouth, and a lip. Takes a #6-1/2 rubber stopper, but a #7 will work. The 250ml flask is 6-1/8" tall OA x 3-3/8" dia with a 1-1/32" ID mouth, and a lip. Takes a #5-1/2 rubber stopper, but a #6 will do the job.
![]() |
92914 1000 ML FLASK | |
![]() |
92912 250 ML FLASK | |
![]() |
92913 500 ML FLASK |
Or funnelette? Whatever. It's a polypropylene mini-funnel, for putting a little something through little openings. Measures 2-1/4" long OA, with a 35mm dia mouth and a fluted, 4mm ID neck.
![]() |
93225 35MM FUNNEL |
Extra-good quality disposable masks: Latex- and fiberglass-free, with a PVC nosepiece, 95% bacteriological and particulate filtration efficiency, and fluid resistance. Measure 7" x 3-3/4" with elastic ear straps and 4-fold, cone-shape construction. Packaged individually. We'll pick a box of white or pale blue.
![]() |
93490 FACE MASK |
Just like on TV! These are what all your fashion-forward crime scene investigators are wearing this year: black latex exam gloves from Phantom™. Powder-free, non-sterile, with a textured surface to improve your grip. Our each is a box of (100) in either Medium or Extra-Large.
![]() |
93488 MEDIUM BLACK LATEX GLOVES | |
![]() |
93489 XL BLACK LATEX GLOVES |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »