Express Shop!
Search Our Stuff
View Cart (0)
Sign In/Up! (It's Worth It!)
Home
/ Items tagged "fusionbomb"
Micro Bits
And we do mean micro. Sizes #61 to #80 (yes, that is twenty different bits) which are from 0.013 to 0.038 inches diameter!! The big boys sell a set of similar bits (carbon steel, like ours) for about $30.00!! Maybe theirs aren't from China.
 |
89087 MICRO BITS |
Do Not (Fill In The Blank)
We know there's a message in this 12" dia safety sign with the classic slashed circle. It's red and white on reflective, adhesive-backed vinyl, and the graphics mean "Do not put out fire with liquids." Given its limited application, we're more excited about cutting out the white sections and putting the red circle/slash over a photo of our least favorite politician. But hey, if you're on the safety committee, knock your socks off. Just make sure the sign isn't hung upside down. Then it says "Do not let fire rain into your coffee."
|
19507 SAFETY SIGN |
Popular Tags:
Stuff
kns
fusionbomb
|
Add Tag 
Air Brush Kit
Includes a fine head assembly air brush, (2) jars to hold paint (3/4 oz. & 2 oz.) a wrench for hook ups and adjustments and a 5 ft. vinyl cord to connect to the propellant source. It comes with a can of compressed propellant (no markings on what the propellant is) which you may be able to replace at a hobby store. Not as fancy as the top of the line items, but an excellent starter for the hobbiest, craftsman, and occasional user.
|
23025 AIR BRUSH KIT |
Small Inner Tube
Monkey Grip", the company that makes tire repair products for professional grease monkeys, has rolled out this G/GR13 inner tube with a standard TR-13 valve. It fits 13" dia tires on lawn tractors, etc., but it also fits around most lunch coolers - and can save the day if your six-pack goes overboard and lands in the lake.
|
35306 INNER TUBE |
Popular Tags:
greybeard
fusionbomb
mommo
|
Add Tag
Hobby Drill
A really cool mini drill set for your mini projects! The 7-1/4" long aluminum push drill for delicate work comes with (1) 1/16" and (1) 1/32" collet, and (20) bits that fit them. The bits are #61 through #80, some so needle-thin they could add tear ducts to a fashion doll. They come in a mini case marked with the number and size of each bit in mils.
|
92548 PUSH DRILL SET |
Mark Any Angle
This torpedo level not only indicates dead-on level with its vertical and horizontal bubbles, it has a floating 360° pointer to indicate the angle of any deviation. The 8" x 2-1/8" x 5/8" plastic level has a 5-3/4" long magnet embedded in its bottom edge, a hole from which to hang it for storage, and -- maybe -- some oily residue. The residue, if there, won't hurt it, and is the reason we can offer it at this incredible price. Just wipe it off, and smile.
|
92292 TORPEDO LEVEL |
Popular Tags:
Anniemas
fusionbomb
funstuff
|
Add Tag
Multitasking Grinder
Give this adaptable Multigrinder a whirl, and we know you'll like it. It's heavy enough to stay put on its rubber feet, but small enough at 9-1/2" wide OA for you to move it to where you need it. The almost 3" dia wheels -- (1) for buffing, (1) for grinding -- are variable speed, up to 10,000 rpm. Best of all, it has a 31" flexible-shaft attachment with a 1/8" collet at the end. It accepts most Dremel®-type bits, and can save you the cost of a rotary tool. The 6-ft power cord has a 3-pronged grounded plug. Comes with detailed instructions for use and safety, and this reminder from A.S.&S. that you should tighten the wheels, if necessary, before using it, and always wear eye protection. It's not as strong as a big bench grinder, but it's a very cool hobby tool!
|
92166 MULTIGRINDER |
Popular Tags:
Grinder
DLMGottaGet
fusionbomb
|
Add Tag
Skinny Bits
Skinny mini bits for your mini drill. Our each is a set of (15) high-speed steel drill bits ranging from 1.05 mm to 2 mm. All have 1/16" dia shafts. All fit into marked slots in the compact vinyl storage pouch.
|
92335 MINI BITS |
Popular Tags:
fusionbomb
jka
clf
|
Add Tag
Clever
That's what we say about this drill pump! Screw hoses to the threaded inlet and outlet valves (1" dia. standard garden hose size) and attach the 1/4" dia. shaft to your drill. Turn the shaft and it pumps for you. Great for aquariums, flood plains, waterbeds, maybe even a mechanical straw! Pump is 2-7/8" dia., 4-1/2" long with the in/out valves.
|
91080 DRILL PUMP |
Popular Tags:
KDClist
Ballingo
fusionbomb
|
Add Tag
Sound Muffs
We wouldn't recommend these "earmuffs" for working on the deck of an aircraft carrier, but they're plenty good to protect you from lawn mower, blower, and chain-saw noise or from your average garage band. Foam inserts inside plastic; stretch-to-fit headband, and ear covers that can be adjusted 2-1/2" up or down.
|
93409 EARMUFFLERS |
Framer's Best Friend
And the carpenter's extra hand. Corner clamps are indispensable for holding miters while drilling and nailing, and having four of them can solve a lot of ugly assembly problems. Our aluminum version is marked to adjust for any angle from 0° to 90°, and locks with a thumbscrew. Jaws open to 2-7/8". Has 3/16" mounting holes on the underside, and measures approx 6" x 7" OA. Our each is one single clamp, not a set, but the price is a good excuse to order (3) more!
|
38427 CORNER CLAMP |
Popular Tags:
Peggy
fusionbomb
|
Add Tag
Shop by Popular Tags
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »
