
If you've maximized the value of your Dremel-type tool (1/8" shank.) with a router attachment, we can offer you a great set of mini router bits. Our set of (10) comes in a nice wooden box with a hinged lid. It includes 1/8", 3/16" and 1/4" straight bits; 3/16" and 1/4" points; concave, convex and straight edge bits; a 1/4" round-nose bit; and a 1/4" groove-cutting bit that is flat on the bottom and curved on the sides. Just enough to give you a little edge on other hobbyists.
![]() |
92160 MINI ROUTER BITS |
Jewelers have the best looking tools. This ultra-slim knife is 4-1/2" long OA, with a flat metal handle that comes in assorted colors (our choice). The short, broad blade is honed to fit into the slit in a watch case and pop the back off easily. It doesn't fold into itself, but does come in a protective vinyl sleeve for storage. Very sharp.
![]() |
92161 WATCH CASE KNIFE |
This 120 VAC, 3/4-watt neon indicator lamp with (2) 6" leads is in a case designed to fit around the shaft of a dimmer switch. The white-plastic case is 2" x 3/4" x 5/16" thick. It has a 3/8" dia opening on one face, and a 7/16" dia opening on the other.
![]() |
32456 NEON RING LAMP |
Hard polypropylene beakers, milky white with a fine pouring spout. No good for flames, but great for low-temp lab applications. Also useful in the kitchen, the garage, or (the big one especially) as a plant watering can.
![]() |
91182 PLASTIC BEAKER, 1000ML | |
![]() |
91180 PLASTIC BEAKER, 100ML | |
![]() |
91181 PLASTIC BEAKER, 250 ML |
Punch 1/8" to 1/2" holes in leather, balsa wood, etc., with this set of (9) steel punches. The punches, which come in a fitted black-plastic carrying case, are 1/2", 7/16", 25/64", 3/8", 5/16", 1/4", 3/16", 5/32" and 1/8". They are 3-1/4" to 3-3/4" long, with knurled grips, imprinted sizes, and side slots to allow the slugs to fall out.
![]() |
92282 (9) PIECE PUNCH SET |
Small, but mighty useful if you need a tiny tap and die set for threading wire or stripped screws. The micro set has a 3-1/4" long die plate and 14 taps (sizes 7 through 20 -- read 0.7 mm through 2.0 mm), and a mighty attractive price. A little oily in its vinyl storage pouch -- but it's all steel, after all, and has to safeguard its complexion.
![]() |
92197 MICRO TAP/DIE SET |
AKA wax carvers. Each tool is about 6" long, stainless steel, with a shaped head on each end. Set "B" has two smaller arrow heads, two sort of like golf clubs and two more small (1/8"+) "spoons". The smaller sizes mean slightly sharper edges and points, but they are still basically dull. You certainly could use them to model in wax, or in clay, or to sculpt plaster of Paris. Handy and unusual.
![]() |
89330 SCULPTING TOOLS, SET B |
The Velleman HPS10 Personal Scope isn't some graphical multimeter -- it's the complete, portable, affordable oscilloscope you've been waiting for! The 10MHz oscilloscope has an analog bandwidth of up to 2mhz. It has 5mV to 20V/div sensitivity in 12 steps, and a 200ns to 1 hour/div time base in 32 steps, full automatic setup, and 5 different trigger modes. It measures dBm, dBV, DC and rms, has signal markers for Volt and Time, and 2 memories to store signals. It has an X and Y position shift signal, DVM readout with x10 option, and audio power calculation (rms and peak). Easy to use and, with a high-contrast LCD display (128 x 64 pixels), easy to read. Accurate enough for professional use on automotive and audio equipment, digital signals and various types of sensors, but priced low enough for educational and hobby applications. Requires (5) "AA" batteries or a 9V adapter (not included).
![]() |
92223 OSCILLOSCOPE |
$169.95
EACH
Out of Stock. Check Back Soon! |
Gadgeteers, get out your charge card. This is an instrument you absolutely have to own. It reaches down below sofa cushions, inside piggy banks, into fish tanks, and past a gallbladder. Not simultaneously, of course. The slim stainless steel alligator forceps is 11" long OA, with a 2-1/2" angled handle and an 8-1/2" reach. It has small 5/8" long serrated jaws, delicate but tight, at the very tip! Better buy an extra. We guarantee people are going to "borrow" these if they see them.
![]() |
92452 ALLIGATOR FORCEPS |
For those little surgical jobs: little forceps. Try these 3-1/2" long stainless steel straight forceps with 3/4" long striated jaws. Lock positions: "Tight" and "Yikes!"
![]() |
92457 SMALL FORCEPS |
What a cool little clamp! Only 8" long overall, the jaws open to 4" when you press the release button and close incrementally as you pull the trigger. The 3/4" x 7/8" pads on the metal-and-plastic tool won't mar the surfaces they're sandwiching. Makes you want to find something to clamp!
![]() |
92041 4" CLAMP |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »