Express Shop!
Search Our Stuff
View Cart (0)
Sign In/Up! (It's Worth It!)
Home
/ Items tagged "inv"
Timing Motors
These are really geared reduction motors, but much smaller and of lower power. Often used to operate cams and switches in electrical circuits, or to drive displays, they can generally be operated in continuous applications if not heavily loaded. Most are about 2" dia. x 1-1/2" thick. Remember CW means “Clockwise” and CCW “Counter–clockwise,” looking at the shaft.
| RPM | ROTATE | ||||
|---|---|---|---|---|---|
 |
33915 230VAC TIMING MOTOR, 2 RPM | 2 | CCW | Details | |
|
30736 9VAC TIMING MOTOR, 2/3 RPM | 2/3 | CW | Details |
Pro Gear
Brass plated calipers, not unlike the ones we use to determine the sizes of all our merchandise! 7-1/4" long when closed. Measures both inside and outside diameters, up to 5-1/2" and 140mm (in both metric and English), in increments of 1/16" and 1mm.
|
91170 BRASS CALIPER |
Diamond Files
A set of (5) needle files, 5-1/2" long, which are coated with industrial diamonds. Perfect for sharpening tools, or doing filing on hard metals etc. when you are sculpting or welding. The shapes are the usual assortment of flat, round and in between shapes.
|
89397 DIAMOND FILES |
Punchy
Permanently mark soft metals, plastics, leather and wooden items with this excellent 38-piece punch set. Imprint 3/16" characters -- 26 uppercase letters, numbers 0-9, a period and an ampersand. It comes with an automated, spring-loaded punch 6-1/2" long, all stowed in a permanent, molded-plastic storage case.
|
91983 (38) PC PUNCH SET |
Bit Box
If your drill bits had been in this steel holder all along, you wouldn't be missing three of them now. The red-painted 6-3/4" x 4-1/4" x 3/4" holder has (13) graduated holes for bits from 1/16" to 1/4" and a see-through snap-open front to hold them in place. Hang the box, toss it in your toolbox, stand it on your bench -- it's always ready to go.
|
34419 DRILL BIT HOLDER |
Vernier Caliper
Our big, strapping brushed-aluminum vernier caliper measures from 0-24" in 1/16" increments, and 0-61 cm in 1 mm increments. Also has 1/128" and .05 mm vernier scales (hence the name!), a knurled thumbscrew to lock in the measurement, and a hole by which to hang it. Entire unit is 29-3/8" long with 3" deep jaws. Please note: The numbers are not etched and can wipe off with some solvents. Please wipe carefully.
|
92290 GIANT CALIPER |
Punch Set
Punch 1/8" to 1/2" holes in leather, balsa wood, etc., with this set of (9) steel punches. The punches, which come in a fitted black-plastic carrying case, are 1/2", 7/16", 25/64", 3/8", 5/16", 1/4", 3/16", 5/32" and 1/8". They are 3-1/4" to 3-3/4" long, with knurled grips, imprinted sizes, and side slots to allow the slugs to fall out.
|
92282 (9) PC PUNCH SET |
Sculpting Tools
AKA wax carvers. Each tool is about 6" long, stainless steel, with a shaped head on each end. Set "B" has two smaller arrow heads, two sort of like golf clubs and two more small (1/8"+) "spoons". The smaller sizes mean slightly sharper edges and points, but they are still basically dull. You certainly could use them to model in wax, or in clay, or to sculpt plaster of Paris. Handy and unusual.
|
89330 SCULPTING TOOLS, SET B |
Leftovers
What’s left of a Kansas City cow after all the steaks are gone? Lots of leather! (Think buckskin, not biker jacket.) You choose from: 1) The one-piece Lace Leather Belly. Really more of a long half-belly, this solid piece of leather is between 2-1/2 and 3-1/2 sq feet. Ours was black, approx 10-1/2” wide x 53” long x 1/8” thick. 2) A pack of Leather Strips. Ours was a very assorted 2 lbs of strips and larger pieces of leather, 1/16” to 1/8” thick, in rust and brown. 3) The Farmer Bundle Repair Bag, 2 lbs of scraps in various colors. Ours contained a solid 12” x 8” black piece and a very large bundle of brown leather thongs 47” long x approx 1/8” square. Lots of variety, and lots of heavy leather for the price.
|
35666 FARMER BUNDLE | |
|
35664 LEATHER BELLY | |
|
35665 LEATHER STRIPS |
A Gripping Tale
What a cool little clamp! Only 8" long overall, the jaws open to 4" when you press the release button and close incrementally as you pull the trigger. The 3/4" x 7/8" pads on the metal-and-plastic tool won't mar the surfaces they're sandwiching. Makes you want to find something to clamp!
|
92041 4" CLAMP |
Duck-billed Locking Pliers
Welders and other people with marketable skills know that these are sheet metal clamps, but the rest of us treasure the sundry other wonders they perform. (Wasn't that poetically put?) The handles lock, and the 3" wide jaws are just ducky at straightening out bent stuff, taking cookie sheets out of hot ovens, clamping oddly-shaped things with even pressure while the glue dries, snapping tile or glass after scoring it, and thumbscrew tightening. Made for Michigan Industrial Tools of drop-forged chromed steel, 8" long.
|
92635 SHEET METAL CLAMP |
Shop by Popular Tags
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »
